Gravity map of Kalabsha area, northwest of Aswan Lake, and its structural significance

A detailed gravity survey was carried out in one of the seismo-active areas at the northwestern region of the High Dam Lake (Kalabsha area) to study its subsurface structure. In order to understand the seismicity of the area, the establishment of a geodynamic model from geological and geodetic data is of great importance. After a series of adjustments and corrections of the measured gravity data, free-air and Bouguer anomaly maps were constructed for the Kalabsha area, and several interpretation techniques were applied to analyse these anomalies. The results of the analysis indicate that the Kalabsha area is affected by several faults trending mainly E-W and N-S. The active area located west of Gebel Marawa is bounded by a set of faults striking NE-SW, N-S and E-W. The throws of these faults range from 160 to 370 m.The minimum depth to the basement complex is about 200 m and its maximum depth is around 600 m. The thickness of the sedimentary column (Nubia sandstone) in the Kalabsha area decreases due west and increases toward the southern and eastern parts of the area. The results explain the tectonic framework of the area well.     

Influence of Degree of Saturation in the Electric Resistivity–Hydraulic Conductivity Relationship

The relationship between aquifer hydraulic conductivity and aquifer resistivity, either measured on the ground surface by vertical electrical sounding (VES) or from resistivity logs, or measured in core samples have been published for different types of aquifers in different locations. Generally, these relationships are empirical and semi-empirical, and confined in few locations. This relation has a positive correlation in some studies and negative in others. So far, there is no potentially physical law controlling this relation, which is not completely understood. Electric current follows the path of least resistance, as does water. Within and around pores, the model of conduction of electricity is ionic and thus the resistivity of the medium is controlled more by porosity and water conductivity than by the resistivity of the rock matrix. Thus, at the pore level, the electrical path is similar to the hydraulic path and the resistivity should reflect hydraulic conductivity. We tried in this paper to study the effect of degree of groundwater saturation in the relation between hydraulic conductivity and bulk resistivity via a simple numerical analysis of Archie’s second law and a simplified Kozeny-Carmen equation. The study reached three characteristic non-linear relations between hydraulic conductivity and resistivity depending on the degree of saturation. These relations are: (1) An inverse power relation in fully saturated aquifers and when porosity equals water saturation, (2) An inverse polynomial relation in unsaturated aquifers, when water saturation is higher than 50%, higher than porosity, and (3) A direct polynomial relation in poorly saturated aquifers, when water saturation is lower than 50%, lower than porosity. These results are supported by some field scale relationships.     

Validation of numerical ground water models used to guide decision making

Many sites of ground water contamination rely heavily on complex numerical models of flow and transport to develop closure plans. This complexity has created a need for tools and approaches that can build confidence in model predictions and provide evidence that these predictions are sufficient for decision making. Confidence building is a long-term, iterative process and the author believes that this process should be termed model validation. Model validation is a process, not an end result. That is, the process of model validation cannot ensure acceptable prediction or quality of the model. Rather, it provides an important safeguard against faulty models or inadequately developed and tested models. If model results become the basis for decision making, then the validation process provides evidence that the model is valid for making decisions (not necessarily a true representation of reality). Validation, verification, and confirmation are concepts associated with ground water numerical models that not only do not represent established and generally accepted practices, but there is not even widespread agreement on the meaning of the terms as applied to models. This paper presents a review of model validation studies that pertain to ground water flow and transport modeling. Definitions, literature debates, previously proposed validation strategies, and conferences and symposia that focused on subsurface model validation are reviewed and discussed. The review is general and focuses on site-specific, predictive ground water models used for making decisions regarding remediation activities and site closure. The aim is to provide a reasonable starting point for hydrogeologists facing model validation for ground water systems, thus saving a significant amount of time, effort, and cost. This review is also aimed at reviving the issue of model validation in the hydrogeologic community and stimulating the thinking of researchers and practitioners to develop practical and efficient tools for evaluating and refining ground water predictive models.     

Acquisition de salinité et qualité des eaux d’une nappe profonde en Tunisie: approche statistique et géochimique

Abstract

The multi-layered Jeffara de Gabes aquifer system is greatly influenced by tectonics. This system is limited at the base and laterally by evaporite layers and has lateral contacts with the sebkhas (salt flats). The groundwater in this aquifer is characterized by high salinity (3–10 g L^-1). Multivariate statistical analysis and a geochemical approach were applied to determine the influence of the evaporite layers and sebkhas on the hydrochemical quality of the Jeffara de Gabes aquifer, and to understand the processes governing its salinity. According to these methods, and based in part on the Sr²⁺/Ca²⁺ ratio, it is demonstrated that the strong salinity of the groundwater is due to interactions between water and the evaporite layers that act as a substratum of this aquifer, as well as saltwater intrusion from the sebkhas. Moreover, the medium- to poor-quality groundwaters are characterized by geochemical interactions: cationic exchange and the precipitation/dissolution process of minerals in the aquifer formations.

Editeur Z.W. Kundzewicz

Citation Ben Alaya, M., Zemni, T., Mamou, A. et Zargouni, F., 2014. Acquisition de salinité et qualité des eaux d’une nappe profonde, Tunisie: approche statistique et géochimique. Hydrological Sciences Journal, 59 (2), 395–419.     

Geology and Mineral Chemistry of Uranium- and Thorium-bearing Minerals in Rare-Metal (NYF) Pegmatites of Um Solimate,South Eastern Desert,Egypt

The garnet muscovite granitic pegmatite of Um Solimate, in southern Egypt, represents a promising asset for strategic and economic metals, especially Bi–Ni–Ag–Nb–Ta as well as U and Th. The ore bodies occur as large masses, pockets and/or veins of very coarse-grained pegmatites, which consist mainly of K-feldspar, quartz and albite with subordinate muscovite, garnet, and biotite. Radiometric data revealed that eU- and eTh-contents of the pegmatites reach up to 39 ppm and 82 ppm, respectively. The studied pegmatites are enriched in primary U and Th minerals (uraninite, coffinite, thorianite and uranothorite) as well as Hf-rich zircon and monazite, which give rise to anomalous radioactive zones. Niobium-tantalium-bearing minerals (i.e. ferrocolumbite, microlite and uranopyrochlore), xenotime, barite, galena, fluorite, and apatite are ubiquitous, and, consequently, the studied pegmatites belong tothe Niobium–Yttrium–Fluorine-type (NYF) family. The noble metal mineralization includes argentite (Ag2S), native Ni and Bi as well as bismite and bismoclite. In addition, beryl and tourmaline are observed in pegmatites near the contact with metasediments and ultramafic bodies. The observed compositional variations of Ta/(Ta+Nb) and Mn/(Mn+Fe) ratios in columbite (0.08–0.45 and 0.11–0.57, respectively) and Hf contents in zircon (3.54–6.46 wt%) may reflectan extreme degree of magmatic fractionation leading to formation of the pegmatite orebody.     

Study of Aerosol Direct and Indirect Effects and Auto-conversion Processes over the West African Monsoon Region Using a Regional Climate Model

This study assesses the direct and indirect effects of natural and anthropogenic aerosols(e.g., black carbon and sulfate)over West and Central Africa during the West African monsoon(WAM) period(June–July–August). We investigate the impacts of aerosols on the amount of cloudiness, the influences on the precipitation efficiency of clouds, and the associated radiative forcing(direct and indirect). Our study includes the implementation of three new formulations of auto-conversion parameterization [namely, the Beheng(BH), Tripoli and Cotton(TC) and Liu and Daum(R6) schemes] in Reg CM4.4.1,besides the default model's auto-conversion scheme(Kessler). Among the new schemes, BH reduces the precipitation wet bias by more than 50% over West Africa and achieves a bias reduction of around 25% over Central Africa. Results from detailed sensitivity experiments suggest a significant path forward in terms of addressing the long-standing issue of the characteristic wet bias in Reg CM. In terms of aerosol-induced radiative forcing, the impact of the various schemes is found to vary considerably(ranging from-5 to-25 W m~(-2)).     

An evaluation of the CORDEX regional climate models in simulating future rainfall and extreme events over Mzingwane catchment,Zimbabwe

The study evaluated CORDEX RCMs’ ability to project future rainfall and extreme events in the Mzingwane catchment using an ensemble average of three RCMs (RCA4, REMO2009 and CRCM5). Model validation employed the statistical mean and Pearson correlation, while trends in projected rainfall and number of rainy days were computed using the Mann-Kendall trend test and the magnitudes of trends were determined by Sen’s slope estimator. Temporal and spatial distribution of future extreme dryness and wetness was established by using the Standard Precipitation Index (SPI). The results show that RCMs adequately represented annual and inter-annual rainfall variability and the ensemble average outperformed individual models. Trend results for the projected rainfall suggest a significant decreasing trend in future rainfall (2016–2100) for all stations at p < 0.05. In addition, a general decreasing trend in the number of rainy days is projected for future climate, although the significance and magnitude varied with station location. Model results suggest an increased occurrence of future extreme events, particularly towards the end of the century. The findings are important for developing proactive sustainable strategies for future climate change adaption and mitigation.     

Seismic hazard assessment for Mymensingh,Bangladesh

Mymensingh municipality lies in one of the most earthquake-prone areas of Bangladesh. The town was completely destroyed during the Great Indian Earthquake of 12 June 1897, for which the surface-wave magnitude was 8.1. In this study the 1897 Great Indian Earthquake was used as a scenario event for developing seismic microzonation maps for Mymensingh. For microzonation purposes SPT data from 87 boreholes were collected from different relevant organizations. To verify those data ten boreholes of depth up to 30 m were drilled. Intensity values obtained for different events were calibrated against attenuation laws to check applicability to the study area. Vibration characteristics at diverse points of the study area were estimated by employing the one-dimensional wave-propagation software SHAKE. SHAKE discretizes the soil profile into several layers and uses an iterative technique to represent the non-linear behavior of the soil by adjusting the material properties at each iteration step. The required input information includes depth, shear wave velocity, damping factor, and unit weight of each soil layer. The liquefaction resistance factor and the resulting liquefaction potential were estimated to quantify the severity of liquefaction. Quantification of secondary site effects and the weighting scheme for combining the various seismic hazards were heuristic, based on judgment and expert opinion.     

Delineating low-arsenic groundwater environments in the Bengal Aquifer System, Bangladesh

Studies within the As-affected Bengal Basin have indicated that low-As groundwater can be found in a variety of geological and geomorphological settings. The hydrogeological environments that host low-As groundwater may be interpreted within a geological framework determined by the Quaternary evolution of the Bengal Aquifer System (BAS). This provides the basis for delineating the position and extent of shallow low-As groundwater, low-As groundwater in oxidised ‘red-bed’ sediments, and deep low-As groundwater. Data available on a national scale allow a preliminary delineation of these low-As groundwater environments across Bangladesh, based on empirical associations of low-As groundwater occurrences with topography, water table elevation, surface sediment lithology, geology and the screen depth of deep wells in low-As zones.