Geometry and kinematics of brittle deformation in the Central Cameroon Shear Zone (Kékem area): Implication for gold exploration within the Central Africa Fold Belt in Cameroon

The Central Africa Fold Belt (CAFB) is a collision belt endowed with gold deposits in Eastern Cameroon area mined for about 50 years. However, favorable areas for gold exploration are poorly known. This paper presents (1) the kinematics of the brittle deformation in the Kékem area in the SW portion of the Central Cameroon Shear Zone and (2) constraints gold mineralization events with respect to the collisional evolution of the CAFB. The authors interpret that the conjugate ENE to E and NNW to NW trending lineament corresponds to the synthetic (R) and the antithetic (R’) shears, which accompanied the dextral slip along the NE to ENE striking shear. The latter coincides with the last 570–552 Ma D₃ dextral simple shear-dominated transpression, which is parallel to the Bétaré Oya shear zone hosting gold deposits. Gold mineralizations, which mainly occurred during the last dextral shearing, are disseminated within quartz veins associated to Riedel’s previous structures reactivated due to late collisional activities of the CAFB as brittle deformation. Gold mineralizations occurred mainly during the 570–552 Ma D₃ event. The reactivation, which might be due to dextral simple shear during mylonitzation, plausibly remobilized the early gold deposits hosted in syn-compressional rocks and/or possibly focused deep-sourced fluid mixed with those released by dehydration. Therefore, the Central Cameroon Shear Zone where Kékem is located, and which shows similar petrographical and structural features to those controling Batouri gold district, is a target area for gold exploration in Cameroon.     

青藏高原西部阿汝冰芯记录的近100 a气温变化研究

以2017年9月钻取自青藏高原西部阿汝冰崩区长度55.29 m的阿汝冰芯为研究对象,通过冰芯δ18O记录与Nye模型重建了冰芯上部17.87 m的时间序列是1917—2016年.结合冰芯邻近的改则、狮泉河气象站1973—2016年夏季平均气温数据,通过相关性分析及线性回归法、Mann-Kendall(M-K)检验分析,...     

Rare,metal micrometeorites from the Indian Ocean

Metal in various forms is common in almost all meteorites but considerably rare among micrometeorites. We report here the discovery of two metal micrometeorites, i.e., (1) an awaruite grain similar to those found in the metal nodules of CV chondrites and (2) a metal micrometeorite of kamacite composition enclosing inclusions of chromite and merrillite. This micrometeorite appears to be a fragment of H5/L5 chondrite. These metal micrometeorites add to the inventory of solar system materials that are accreted by the Earth in microscopic form. They also strengthen the argument that a large proportion of material accreted by the Earth that survives atmospheric entry is from asteroidal sources.     

Sedimentological analysis of two drill cores through the crater moat‐filling breccia,Flynn Creek impact structure,Tennessee

Sedimentological (line‐logging) analysis of two drill cores, FC77‐3 and FC67‐3, situated, respectively, in the northwestern and southeastern quadrants of the Flynn Creek impact structure's crater‐moat area reveals that the ~27 m thick crater moat‐filling breccia consists of three subequal parts. These parts, which were deposited during early modification stage of this marine‐target impact structure, are distinguished on the basis of vertical trends in sorting, grain size, and counts of clasts per meter in comparison with other well‐known marine‐target impact structures, namely Lockne, Tvären, and Chesapeake Bay. The lower part is interpreted to represent mainly slump deposits, and the middle part is interpreted to represent a stage intermediate between slump and marine resurge, that is, a traction flow driven by overriding suspension flow. The upper part (size graded, and relatively well sorted and fine grained) is interpreted to represent marine resurge flow only. The upper part is capped by a relatively thin and relatively fine‐grained calcarenite to calcisiltite deposit.     

Long-term soil moisture content estimation using satellite and climate data in agricultural area of Mongolia

The purpose of this study is to estimate long-term SMC and find its relation with soil moisture (SM) of climate station in different depths and NDVI for the growing season. The study area is located in agricultural regions in the North of Mongolia. The Pearson’s correlation methodology was used in this study. We used MODIS and SPOT satellite data and 14 years data for precipitation, temperature and SMC of 38 climate stations. The estimated SMC from this methodology were compared with SM from climate data and NDVI. The estimated SMC was compared with SM of climate stations at a 10-cm depth (r² = 0.58) and at a 50-cm depth (r² = 0.38), respectively. From the analysis, it can be seen that the previous month’s SMC affects vegetation growth of the following month, especially from May to August. The methodology can be an advantageous indicator for taking further environmental analysis in the region.     

Experimental investigation of water impact on axisymmetric bodies

The results of an elaborate experimental investigation on bottom slamming of axisymmetric objects are presented. Drop tests have been performed on a hemisphere and two conical shapes with different deadrise angles. The test setup is designed so as to prevent small rotations of the test objects which cause scatter in the measurement data. The pressure distribution and evolution as well as the body motion parameters are measured during impact. By means of a high speed camera the water uprise is visualized and the wetting factor is determined for the cones. The results are compared with a three-dimensional asymptotic theory for axisymmetric rigid bodies with constant entry velocity. The ratio between the registered peak pressures and the asymptotic theory are in accordance with comparable experiments in the literature. The asymptotic theory, however, is found to be quite conservative, since the measured peak pressure levels appear to be approximately 50% to 75% of the theoretical levels.     

Formation and stability of mixed Mg/Ca/phytate species in synthetic seawater media: Consequences on ligand speciation

The results of a potentiometric investigation (by ISE-H⁺, glass electrode) on the speciation of phytate ion (Phy¹²⁻) in an ionic medium simulating the major components (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻ and SO₄²⁻) of natural seawater, at different salinities and t = 25 °C, are reported. The work was particularly aimed at determining the possible formation of mixed Ca²⁺–Mg²⁺–phytate ion pairs, and to establish how including the formation of these mixed species would affect the speciation modeling in seawater media. After testing various speciation models, that considering the formation of the MgCaH₃Phy⁵⁻, MgCaH₄Phy⁴⁻, Mg₂CaH₃Phy³⁻ and Mg₂CaH₄Phy²⁻ species was accepted, and corresponding stability constants were determined at two salinities (S = 5, 10). A discussion is reported both on the choice of the experimental conditions and on the possibility to extend these results to those typical of real seawater. A detailed procedure is also described to demonstrate that the stability of these species is higher than that statistically predicted. As reported in literature, a parameter, namely log X, has been determined in order to quantify this extra stability for the formation of each mixed species at various salinities. For example, at S = 10, log X₁₁₃ = 2.67 and log X₁₁₄ = 1.37 for MgCaH₃Phy⁵⁻ and MgCaH₄Phy⁴⁻ (statistical value is log X_stat = 0.60), and log X₂₁₃ = 6.11 and log X₂₁₄ = 2.15 for Mg₂CaH₃Phy³⁻ and Mg₂CaH₄Phy²⁻ (log X_stat = 1.43), respectively. Results obtained also showed that the formation of these species may occur even in conditions of low salinity (i.e. low concentration of alkaline earth cations) and low pH (i.e., more protonated ligand).     

Evaluation of policy options for the live reef food fish trade in the province of Palawan,Western Philippines

The live reef food fish (LRFF) trade has an estimated annual retail value of US$1 billion in the Asia-Pacific region and at least US$30 million in the Philippines. Palawan Province is the trade's center accounting for as much as 55% of the commodity's total export. Concern about the LRFF trade has caused the Palawan Provincial government to take action to regulate the trade. Four key policy options to address the short-term policy objective of developing a sustainable LRFF industry through the reduction of threats associated with destructive fishing and overfishing were proposed. These four policy options and associated analyses were presented to stakeholders at three separate policy consultations. The stakeholders reached a consensus that a regulated LRFF trade was the most sensible option. As a result, the Provincial Government of Palawan took action to enact “The Palawan Live Reef Fish Ordinance of 2006”, which provides for the sustainable and integrated regulation of the LRFF industry. This provincial ordinance will assist in crafting a national policy for the LRFF trade and may also be useful in revising the 1998 Philippine Fisheries Code. The key challenge is how to translate the ordinance provisions into effective on-the-ground actions.     

Prototype measurements and small-scale model tests of wave overtopping at shallow rubble-mound breakwaters: the Ostia-Rome yacht harbour case

The paper presents the comparison between the results of small-scale model tests and prototype measurements of wave overtopping at a rubble-mound breakwater. The specific structure investigated is the west breakwater of the yacht harbour of Rome at Ostia (Italy) and is characterized by a gentle seaward slope (1/4) and by a long, shallow foreshore. The laboratory tests firstly aimed at carefully reproducing two measured storms in which overtopping occurred and was measured. The tests have been carried out in two independent laboratories, in a wave flume and in a wave basin, hence using a two-dimensional (2-D) and a three-dimensional (3-D) setup. In the 2-D laboratory tests no overtopping occurred during the storm reproductions; in the 3-D case discharges five to ten times smaller than those observed in prototype have been measured. This indicates the existence of model and scale effects. These effects have been discussed on the basis of the results of several parametric tests, which have been carried out in both laboratories, in addition to the storm reproductions, varying wave and water level characteristics. Final comparison of all the performed tests with 86 prototype measurements still suggests the existence of scale and model effects that induce strong underestimation of overtopping discharge at small scale. The scale reproduction of wave breaking on the foreshore, together with the 3-D features of the prototype conditions and the absence of wind stress in the laboratory measurements, have been individuated as the main sources of scale and model effects. The paper also provides a comparison between the data and a largely used formula for wave overtopping discharges in the presence of structures similar to the one at hand. The suitable value of a roughness factor that appears in that formula is investigated and good agreement is found with other recent researches on rubble-mound breakwaters.     

Controlling factors on the morphology and spatial distribution of methane-related tubular concretions – Case study of an Early Eocene seep system

Up to 10 m in length and >1 m in diameter tubular, calcite-cemented sandstone concretions are hosted by the faulted Dikilitash unconsolidated sands and sandstones. These structures document shallow subsurface pathways of Early Eocene methane seepage in the Balkan Mountains foreland (NE Bulgaria). Their exceptional exposure allowed a unique study of the factors governing the morphology and spatial distribution of such fossilized fluid conduits. The large dimensions and subvertical, cylindrical shape of the most common tube type primarily reflects the buoyancy-driven, vertical path of an ascending gas-bearing fluid through permeable, mainly unconsolidated sandy host sediments. Tube morphology was also influenced by local stratigraphic anisotropies and might as well document differences in former seepage conditions. Mapping of >800 tubular concretions showed the NNW–NNE elongation and alignment of tube clusters and massive cemented sandstone structures. This suggests that Paleogene fault systems played a major role in directing the movement of fluids. However, within a single tube cluster, tubes are preferentially aligned, over distances up to 50 m along directions at an angle between 10° and 36° with respect to the inferred NNW–NNE, cluster parallel fault traces. In addition, cylindrical tubes of analogue dimensions are aligned over distances >100 m along N15° to N25°-oriented directions. It is hypothesized that this spatial geometry of tubular concretions reflects the complex geometry of deformations structures in fault damage zones along which fluids were preferentially channelled.