Comparative analysis of phytoplankton patterns in two modified lakes with contrasting hydrological features

Hydrological management represents one of the main factors controlling physical and chemical characteristics as well as biodiversity and productivity of planktonic communities in artificial and modified lakes. In Alpine piedmont reservoirs, which often receive large water inputs from high altitude watersheds, control operated by hydrological regime over ecological processes is also mediated by other related variables such as water temperature and turbulence, and load of inorganic suspended solids. This contribution reports on results obtained from a comparative study on the impact of hydrological regime on phytoplankton patterns in two modified piedmont lakes of different size and hydrology located in the NE Italian Alps: Lake Santa Croce (V = 147 × 10⁶ km³) and Lake Toblino (V = 5.7 × 10⁶ km³). Phytoplankton of both lakes was characterised by a pronounced dominance of diatoms, accompanied by cryptophytes and green algae. The mesotrophic Lake Santa Croce showed a typical seasonal succession of dominant groups, while phytoplankton growth in the eutrophic Lake Toblino was variable and showed pronounced pulses in relation to dramatic changes in the hydrological regime. The comparative study of phytoplankton, based on morpho-functional classification and application of multivariate analyses (non-metric multidimensional scaling, principal components analysis, and redundancy analysis), showed that hydrological regime affected phytoplankton growth in the two lakes both directly, i.e. through renewal time, and indirectly, i.e. regulating thermal conditions in Lake Santa Croce and nutrient availability in both lakes. Nevertheless, effectiveness of hydrological constraints largely depended on lake size and morphology, being more pronounced in the shallower and smaller Lake Toblino.     

Interactive effects of environmental variability and human impacts on the long-term dynamics of an Amazonian floodplain lake and a South Atlantic coastal lagoon

Human activities are exposing freshwater ecosystems to a wide range of stressors, whose direct and indirect effects can be alleviated or exacerbated through interactive effects with dynamic environmental drivers. This study used long-term data from two Neotropical lacustrine freshwater systems (Batata Lake, an Amazonian floodplain lake and Imboassica lagoon, an Atlantic coastal lagoon) subjected to different kinds of environmental fluctuations (i.e., flood pulse and sandbar opening) and anthropogenic impacts (i.e., siltation and eutrophication). Our objective was to determine whether the effects of human perturbations are contingent on modifications of important biotic and abiotic characteristics through environmental variability. For both ecosystems, environmental variability consistently interacted with anthropogenic perturbations to alter most of the variables analyzed, such as nutrient dynamics, chlorophyll-a concentration, zooplankton and benthic invertebrate species richness, and temporal community stability, which indicates that interactive effects between environmental variability and anthropogenic perturbations may impact a myriad of ecosystem properties. Furthermore, the nature of these interactive effects was highly dependent on the variable considered and on the ecosystem analyzed. For example, at Imboassica lagoon, sandbar openings interacted synergistically with trophic state to increase the phosphorus concentration in the water column. At Batata Lake, flooding generally alleviated the negative effects of siltation on species richness by both diluting inorganic suspended material concentration and by promoting local recruitment from the regional species pool. Such results indicate that our ability to understand and predict the outcome of anthropogenic impacts on inland aquatic systems can be hampered if we consider human stressors as “static” phenomena disconnected from dynamic interactions with major local environmental drivers.     

Isotopic and geochemical characterization of salinization in the shallow aquifers of a reclaimed subsiding zone: The southern Venice Lagoon coastland

The coastal plain bordering the southern Venice Lagoon is a reclaimed lowland characterized by high subsidence rate, and ground level and water-table depth below sea level. In this agricultural region, where the surface hydrologic network is entirely artificially controlled by irrigation/drainage canals, salinization problems have long been encountered in soils and groundwaters. Here we use isotopic and geochemical tracers to improve our understanding of the origin of salinization and mineralization of the semi-confined aquifer (0–40 m), and the freshwater inputs to this hydrological system. Water samples have been collected at different seasons in the coastal Adriatic Sea, lagoon, rivers and irrigation canals, as well as in the semi-confined aquifer at depths between 12 and 35 m (14 boreholes), and in the first confined aquifer (three boreholes drilled between 40 and 80 m depth). Stable isotopes (δ¹⁸O and δD) and conductivity profiles show that direct saline intrusion from the sea or the lagoon is observed only in a restricted coastal strip, while brackish groundwaters are found over the entire topographic and piezometric depression in the centre of the study area. Fresh groundwaters are found only in the most western zone. The sharp isotopic contrast between the western and central regions suggests disconnected hydrological circulations between these two parts of the shallow aquifer. The border between these two regions also corresponds to the limits of the most strongly subsiding zone.Our results can be interpreted in terms of a four end-member mixing scheme, involving (1) marine water from the lagoon or the open sea, (2) alpine and pre-alpine regional recharge waters carried either by the main rivers Adige, Bacchiglione and Brenta (irrigation waters) or by the regional groundwater circulation, (3) local precipitation, and (4) evaporated waters infiltrated from the surface. Infiltration from the surface is also revealed by the stratification of the electrical conductivity profiles, showing that the brackish groundwaters are overlain by a shallow layer of less saline water all over the central depression. In the first confined aquifer, the groundwaters have isotopic compositions similar to the deep groundwaters of the Venetian confined aquifers (40–400 m depth). The isotopic data and the Br/Cl ratio show that the origin of the salinization of the phreatic aquifer can be ascribed to seawater intrusion alone, with no indication of the involvement of deep brines (identified at 450 m depth) in the process.The chemical composition of the saline and brackish groundwaters is characterized by an excess of sodium and a deficit of calcium compared to conservative mixing between fresh groundwaters and seawater. This suggests that the phreatic aquifer is progressively freshening, as a consequence of the beneficial influence of the extensive irrigation/drainage network, including raised canals acting as a hydraulic barrier along the coast. This freshening tendency may have been lasting since the reclamation in the mid-twentieth century, and has probably been accelerated by the ban on groundwater abstraction since the 1970s.     

Sources of Mw 5+ earthquakes in northeastern Italy and western Slovenia: An updated view based on geological and seismological evidence

We present an overview of the seismogenic sources of northeastern Italy and western Slovenia, included in the last version of the Database of Individual Seismogenic Sources (DISS 3.0.2) and a new definition of the geometry of the Montello Source that will be included in the next release of the database. The seismogenic sources included in DISS are active faults capable of generating M_w > 5.5 earthquakes. We describe the method and the data used for their identification and characterization, discuss some implications for the seismic hazard and underline controversial points and open issues.In the Veneto–Friuli area (NE Italy), destructive earthquakes up to M_w 6.6 are generated by thrust faulting along N-dipping structures of the Eastern Southalpine Chain. Thrusting along the mountain front responds to about 2 mm/a of regional convergence, and it is associated with growing anticlines, tilted and uplifted Quaternary palaeolandsurfaces and forced drainage anomalies. In western Slovenia, dextral strike–slip faulting along the NW–SE trending structures of the Idrija Fault System dominates the seismic release. Activity and style of faulting are defined by recent earthquakes (e.g. the M_s 5.7, 1998 Bovec–Krn Mt. and the M_w 5.2, 2004 Kobarid earthquakes), while the related recent morphotectonic imprint is still a debated matter.We reinterpreted a large set of tectonic data and developed a segmentation model for the outermost Eastern Southalpine Chain thrust front. We also proposed the association of the four major shocks of the 1976 Friuli earthquake sequence with individual segments of three major thrust fronts. Although several sub-parallel active strike–slip strands exist in western Slovenia, we were able to positively identify only two segments of the Idrija Fault System. A comparison of the regional GPS velocity with long-term geological slip-rates of the seismogenic sources included in DISS shows that from a quarter to half of the deformation is absorbed along the external alignment of thrust faults in Veneto and western Friuli. The partitioning of the deformation in western Slovenia among the different strike–slip strands could not be quantified.     

Impact of trace metals on denitrification in estuarine sediments of the Douro River estuary,Portugal

Denitrification influences the nitrogen budget in estuaries by removing fixed nitrogen from the inorganic pool; rates are dependent on both geological and geographic conditions as well as increasing anthropogenic impacts. In this study the effects of copper (Cu), chromium (Cr), zinc (Zn), cadmium (Cd) and lead (Pb), on the denitrification pathway were evaluated in subtidal and intertidal sediments of the Douro River estuary. Dinitrogen, N₂O and NO₂⁻ production rates were measured in triplicate slurries of field samples under different treatments of metal concentrations. Results demonstrated that similar metal amendments led to different site responses for denitrification, suggesting that variations in sediment properties (metal concentrations, grain size, organic matter content, etc.) and/or differences in denitrifying community tolerance modulate the level of metal toxicity. Denitrifying communities in subtidal muddy sediments were not affected by increasing concentrations of metals. In contrast, intertidal sandy sites revealed high sensitivity to almost all trace metals tested; almost complete inhibition by Cr (95%) and Cu (85%) was observed for 98 and 79 μg per gram of wet sediment respectively, and by Zn (92%) at the highest concentration added (490 μg per gram of wet sediment). Moreover, the addition of trace metals stimulated N₂O and NO₂⁻ accumulation in intertidal sandy (Zn, Cu, Cr and Cd) and muddy sediments (Cu and Zn), demonstrating a pronounced inhibitory effect on specific steps within the denitrification enzymatic system. In summary, the results obtained suggest that, according to the type of estuarine sediment, trace metals cannot only reduce total N removal from an estuary via denitrification but also can enhance the release of N₂O, a powerful greenhouse gas.     

Seismic expression of shallow- to deep-water contourites along the south-eastern Brazilian margin

The Neogene-to-Quaternary sediment section along the south-eastern Brazilian margin was deeply influenced by bottom currents acting from the upper slope down to the continental rise in water depths ranging from 100 m to >3,500 m. Different depositional styles are observed as a resultant of the interaction between bottom currents, seafloor topography, available grain size and time span involved in the process. Their importance in the sedimentary record varies in accordance with the intensity of that interaction. Deposits associated to bottom currents are both coarse-grained and fine-grained and are distributed along all margins. The identification of coarse-grained deposits in deep-water is critical for the petroleum industry, thus characterising sandy contourites as relevant for the understanding of reservoir analogues. Slope plastered sand sheets occur in the upper slope setting. They are strike-fed, along slope-elongated and internally characterised by high amplitude seismic reflections usually developing reflection free blankets above erosional terraces due to their small thickness (in average less than 30 m thick). Middle and lower slope contourites are mostly constituted of fine-grained plastered and separated drifts, where a general upslope migration trend and an erosional basal surface are observed. The seafloor topography from the foot of the slope towards the continental rise is controlled by salt walls and diapirs which influence the acceleration of the currents and the development of contourite drifts. Paleoceanographic reconstructions supported by seismic evidence indicate that the major currents sculpting the seafloor are southerly originated and their action can overcome the importance of gravity currents where continental supply is reduced.E&P/UN-RIO/ATEX/ABIG-PL     

How to evaluate the quality of coarse‐resolution DEM‐derived drainage networks

The quality of digital elevation model (DEM)‐derived river drainage networks (RDNs) is influenced by DEM quality, basin physical characteristics, scale, and algorithms used; these factors should not be neglected. However, few research studies analyse the different evaluation approaches used in the literature with respect to adequacy, meaning of the results, advantages, and limitations. Focusing on coarse‐resolution networks, this paper reviews the use of these techniques and offers new insights on these issues. Additionally, we propose adaptations for selected metrics and discuss distinct interpretations for the evaluation of RDNs derived at different spatial resolutions (1, 5, 10, 20, and 30 km) considering the Uruguay River basin (206,000 km²) as a case study. The results demonstrate that lumped basin/river characteristics and basin delineation analysis should not be used as evaluation criteria for RDN quality; however, some of these metrics offer useful complementary information. Percentage of the DEM‐derived RDN within a uniform buffer placed around a river network considered as reference and mean separation distance between these two networks are more suitable metrics, but the former is insensitive to serious errors. The change in reference from a fine‐scale network to a coarse‐resolution manual tracing network significantly augments the discrepancy of these largest errors when the mean distance metric was applied, and visual comparison analysis is necessary to interpret the results for other metrics. We recommend the use of the mean distance metric in combination with a detailed visual assessment, the importance of which increases as the resolution coarsens. In both cases, the impact of network quality can be further refined by quantifying the basin shape and river length errors.     

High‐resolution topography and anthropogenic feature extraction: testing geomorphometric parameters in floodplains

In floodplains, anthropogenic features such as levees or road scarps, control and influence flows. An up‐to‐date and accurate digital data about these features are deeply needed for irrigation and flood mitigation purposes. Nowadays, LiDAR Digital Terrain Models (DTMs) covering large areas are available for public authorities, and there is a widespread interest in the application of such models for the automatic or semiautomatic recognition of features. The automatic recognition of levees and road scarps from these models can offer a quick and accurate method to improve topographic databases for large‐scale applications. In mountainous contexts, geomorphometric indicators derived from DTMs have been proven to be reliable for feasible applications, and the use of statistical operators as thresholds showed a high reliability to identify features. The goal of this research is to test if similar approaches can be feasible also in floodplains. Three different parameters are tested at different scales on LiDAR DTM. The boxplot is applied to identify an objective threshold for feature extraction, and a filtering procedure is proposed to improve the quality of the extractions. This analysis, in line with other works for different environments, underlined (1) how statistical parameters can offer an objective threshold to identify features with varying shapes, size and height; (2) that the effectiveness of topographic parameters to identify anthropogenic features is related to the dimension of the investigated areas. The analysis also showed that the shape of the investigated area has not much influence on the quality of the results. While the effectiveness of residual topography had already been proven, the proposed study underlined how the use of entropy can anyway provide good extractions, with an overall quality comparable to the one offered by residual topography, and with the only limitation that the extracted features are slightly wider than the investigated one. Copyright © 2013 John Wiley & Sons, Ltd.     

Depuration dynamics of oysters (Crassostrea gigas) artificially contaminated by Salmonella enterica serovar Typhimurium

The State of Santa Catarina produces the greatest quantity of edible mollusks in Brazil. To guarantee sanitary qualify, mollusk cultures should be monitored for contamination by pathogenic microorganisms. A self-purification or "depuration" system that eliminates Salmonella enterica serovar Typhimurium contamination from oysters has been developed and evaluated. The depuration process occurred within a closed system, in which 1000 L of water was recirculated for 24 h. The water was sterilized with ultraviolet (UV) light, chlorine, or both together. Oysters (Crassostrea gigas) artificially contaminated with S. typhimurium were harvested every 6 h. Samples of oyster tissue were excised and both the presence and numbers of bacteria were determined. Combined UV light and chlorine treatments resulted in total elimination of bacteria within 12 h. Polymerase chain reaction detected bacteria in water exposed to the three treatments. This pioneering study is the first of its kind in Brazil and represents a major contribution to commercial mollusk culture in this country.