Microstructural Inhomogeneity and Mechanical Anisotropy Associated with Bedding in Rothbach Sandstone

This study present the result of conventional triaxial tests conducted on samples of Rothbach sandstone cored parallel, oblique (at 45 degrees) and perpendicular to the bedding at effective pressures ranging from 5 to 250 MPa. Mechanical and microstructural data were used to determine the role of the bedding on mechanical strength and failure mode. We find that samples cored at 45 degrees to the bedding yield at intermediate level of differential stress between the ones for parallel and perpendicular samples at all effective pressures. Strain localization at high confining pressure (i.e., in the compactive domain) is observed in samples perpendicular and oblique to the bedding but not in samples cored parallel to the bedding. However, porosity reduction is comparable whether compactive shear bands, compaction bands or homogeneous cataclastic flow develop. Microstructural data suggest that (1) mechanical anisotropy is controlled by a preferred intergranular contact alignment parallel to the bedding and that (2) localization of compaction is controlled by bedding laminations and grain scale heterogeneity, which both prevent the development of well localized compaction features.     

Seasonal changes in imposex and tissue burden of butyltin compounds in Thais clavigera populations along the coastal area of Mirs Bay, China

We assessed the current status of tributyltin (TBT) contamination of Thais clavigera (Gastropoda) along the coastal area of Mirs Bay, China for the first time. The snail samples were collected from 10 different sites in the summer (June) and winter (December) of 2006, respectively. They were analyzed for imposex status, i.e. relative penis size index (RPSI) and vas deferens sequence index (VDSI), followed by quantification of butyltins in their tissues. Most of the collected females suffered from imposex, but the level of butyltin contamination varied with the distance from Yantian Port, which is currently the fourth busiest container port in the world. The tissue concentration of TBT varied with season. For a particular site, the winter samples in general contained much higher concentration of TBT than the summer samples. RPSI, VDSI and organotin concentrations were higher in T. clavigera collected from sites closer to the Port, such as the Seafood Street and Kat O. Both RPSI and VDSI were positively correlated with the tissue burden of tributyltin. VDSI exhibited little seasonal variability, whereas RPSI showed marked seasonal variability, with lower values in the summer samples. The current results will serve as an important reference for long-term monitoring of butyltin contamination in this area.     

Bender Elements在测试土样剪切波速中的应用

本文以作者在香港理工大学土木与结构工程系设计制作的一套BenderElements为例,介绍了BenderElements的原理、发展历史、应用范围、使用方法和注意事项等。BenderElements是由压电陶瓷材料制成的,在拉伸、压缩作用下,会产生正、负电荷,反过来,给它施加正、负电荷后,它又可产生弯曲振动,正是利用它的这一特性,将其作成接收和发射装置,来测试土样的剪切波速Vs。BenderElements在安装使用时,防水和静电屏蔽十分关键。Vs可在场地地震反应、液化判别、动力基础设计、检测地基改良效果等方面获得应用。震相识别的原则是接收信号的第一个峰值为到时。     

Distribution and source apportionments of polychlorinated biphenyls (PCBs) in mariculture sediments from the Pearl River Delta, South China

Surface and core sediments collected from six mariculture farms in the Pearl River Delta (PRD) were analyzed to evaluate contamination levels of polychlorinated biphenyls (PCBs). The ∑PCBs (37 congeners) concentrations ranged from 5.10 to 11.0 ng g(-1) (mean 7.96 ng g(-1)) in surface and 3.19 to 22.1 ng g(-1) (mean 7.75 ng g(-1)) in core sediments, respectively. The concentrations were significantly higher than that measured in the sediments of their corresponding reference sites, whereby the average enrichment percentages were 62.0% and 42.7% in surface and core sediments, respectively. Significant correlations (R2=0.77, p<0.05) of PCB homologue group proportions between fish feeds and surface mariculture sediments suggested that fish feed input was probably the main source for the enrichment of PCBs. Due to the fact that PCBs could be transferred along food chains, PCB contamination in fish feeds and mariculture sediments should not be overlooked.     

A study on mechanical properties and fracturing behavior of Carrara marble with the flat-jointed model

Overcoming two inherent limitations presented by the standard bonded-particle model (BPM), the flat-jointed model still lacks extensive application. This study hereby conducts a comprehensive investigation on the application of the flat-jointed model in rock mechanics study. First, after a careful examination on the mechanical behavior of the flat-joint contact, a systematic calibration has been conducted to build numerical models matching the mechanical properties of Carrara marble. Second, the validated model is used to simulate the fracturing behavior of marble specimens containing a single or en-echelon flaws. Finally, the appearance of particle flow code (PFC) models has been compared with the results obtained from optical observation in order to establish a possible correlation between PFC models and real marble regarding microcracking behavior. Discussions suggest that to remove the particle size effect, the model resolution (ratio of sample dimension to the average particle diameter) should be larger than 30 in the flat-jointed model and 150 in the BPM, respectively. Results from the above investigations suggest that the flat-jointed model is capable of matching both the mechanical properties and fracturing behavior of Carrara marble. The numerical model is more reliable to predict the fracturing path at the instant of initiation than at failure. Development of initial fractures is not only controlled by the magnitude of tension force but also influenced by the extent of distribution of tension force. The appearance and components of a fracture in flat-jointed models probably reveal not only its property (tensile or shear) but also the corresponding microcracking behavior of real rocks.     

Remotely sensed agricultural modification improves prediction of suitable habitat for a threatened lizard

The geographical distribution of a species is limited by factors such as climate, resources, disturbances and species interactions. Environmental niche models attempt to encapsulate these limits and represent them spatially but do not always incorporate disturbance factors. We constructed MaxEnt models derived from a remotely sensed vegetation classification with, and without, an agricultural modification variable. Including agricultural modification improved model performance and led to more sites with native vegetation and fewer sites with exotic or degraded native vegetation being predicted suitable for A. parapulchella. Analysis of a relatively well-surveyed sub-area indicated that including agricultural modification led to slightly higher omission rates but markedly fewer likely false positives. Expert assessment of the model based on mapped habitat also suggested that including agricultural modification improved predictions. We estimate that agricultural modification has led to the destruction or decline of approximately 30–35% of the most suitable habitat in the sub-area studied and approximately 20–25% of suitable habitat across the entire study area, located in the Australian Capital Territory, Australia. Environmental niche models for a range of species, particularly habitat specialists, are likely to benefit from incorporating agricultural modification. Our findings are therefore relevant to threatened species planning and management, particularly at finer spatial scales.     

The provenance of Australian uranium ore concentrates by elemental and isotopic analysis

Elemental and isotopic ratio analyses of U ore concentrate samples, from the 3 operating U mining facilities in Australia, were carried out to determine if significant variations exist between their products, thereby allowing the U ore concentrate’s origin to be identified. Elemental analyses were conducted using inductively coupled plasma mass spectrometry (ICP-MS) and X-ray fluorescence spectrometry (XRF). Lead isotope ratios were measured using ICP-MS and U isotope analyses were conducted using thermal ionisation mass spectrometry (TIMS). Minute quantities of sample, such as that obtained from a swipe, were also examined for elemental concentrations using secondary ion mass spectrometry (SIMS). The results of multivariate statistical analysis show clear patterns in the trace elemental composition of the processed U ores, indicating that it is possible to use this feature as a unique identifier of an Australian U ore concentrate’s source. Secondary ion mass spectrometry analyses also allow individual particles to be differentiated using this ‘fingerprinting’ technique. Isotope ratios determined using TIMS reveal that there is a significant difference in the n(²³⁴U)/n(²³⁸U) isotope ratio between the U ore concentrate from each mine.     

Hydrographic surveys and sedimentation in Deep Bay,Hong Kong

Three hydrographic surveys were carried out in Deep Bay, which is located in the eastern part of Pearl estuary between Shenzhen, the most successful special economic zone of PRC, and Hong Kong. Data on current, size distributions of bottom sediment, suspended solids, and some water quality parameters were obtained. This information is of value for mathematical modeling of tidal circulation and sediment transport in the bay, and also useful in the planning of further development in this area. The sedimentation rate in Deep Bay was estimated by two different approaches, viz. comparison of historical navigation maps and²¹⁰Pb dating. Information obtained from the maps indicated that average sedimentation rate between 1898 and 1949 was about 8 mm/yr, while a 15 mm/yr figure was obtained from the²¹⁰Pb dating for recent years.