Holocene Faunal Trends in West Siberia and Their Causes

Based on an analysis of the transformation of vertebrate and invertebrate fauna of West Siberia in the Holocene, the classification and periodization of the main faunal trends are presented. Against the background of changing environmental conditions, the key regularities of the faunal dynamics, and the ways some species penetrate into the territory of the region and others disappear from the beginning of the Holocene to the present time have been indicated. Three global and four fluctuating trends are identified. The anthropogenic trend is ascertained separately. A conclusion is made about the prevailing causes of these changes, associated primarily with periodic climatic processes of different levels, determined by planetary geological and cosmic cycles. It is emphasized that, in the historical period, anthropogenic factors play a significant role in the regional faunal dynamics.     

Hydrochemical structure of the waters in the eastern part of the Laptev Sea in autumn 2015

The study of the Laptev Sea was a part of a comprehensive program for investigating Arctic seas during the cruise 63 of the R/V Akademik Mstislav Keldysh. On a transect along 130° E (September 8–14, 2015) from the estuary area of the Lena River on the traverse of the city of Tiksi to the continental slope (over 700 km), water samples were taken to study the hydrochemical structure of waters and the influence of the Lena River flow. From the obtained data, it was found that the effect of fresh water on the sea surface layer was very high and can be traced to a great distance from the river delta. An unconservative distribution of some hydrochemical parameters in the mixing zone was recorded. The concentration of nutrients in the surface layer, and a high turbidity can serve as limiting factors in the development of the phytoplankton community.     

A note on ocean surface drift with application to surface velocities measured with HF Radar

The ocean drift current consists of a (local) pure drift current generated by the interaction of wind and waves at the sea surface, to which the surface geostrophic current is added vectorially. We present (a) a similarity solution for the wave boundary layer (which has been validated through the prediction of the 10-m drag law), from which the component of pure drift current along the direction of the wind (and hence the speed factor) can be evaluated from the 10-m wind speed and the peak wave period, and (b) a similarity solution for the Ekman layers of the two fluids, which shows that under steady-state neutral conditions the pure drift current lies along the direction of the geostrophic wind, and has a magnitude 0.034 that of the geostrophic wind speed. The co-existence of these two similarity solutions indicates that the frictional properties of the coupled air-sea system are easily evaluated functions of the 10-m wind speed and the peak wave period, and also leads to a simple expression for the angle of deflection of the pure drift current to the 10 m wind. The analysis provides a dynamical model for global ocean drift on monthly and annual time scales for which the steady-state neutral model is a good approximation. In particular, the theoretical results appear to be able to successfully predict the mean surface drift measured by HF Radar, which at present is the best technique for studying the near surface velocity profile.     

Peculiarities of slick formation on the sea surface

This paper deals with surface slicks, their nature, and causes of formation in context of the development of remote detection methods and investigation of dynamic processes in the ocean and at the air–ocean interface. A simplified formalism is introduced for slick–sea surface contrast formation which takes into account the upward sea radiation and qualitatively explains in situ measurement results. The results of a detection of slicks on the coastal water surface are also described, which, together with the simplified formalism suggested, provide optimal experimental conditions for slick–sea surface contrast measurements; i.e., the contrast of the P component of reflected radiation is measured at viewing angles close to the horizon.     

Model of sand-particle separation by wind

We consider a mechanism for sand-particle separation by wind. A computational experiment has been conducted to find the possible characteristics of the structure of the mutual location of particles. We consider some scenarios for particle separation from the surface: the direct separation of particles by wind (without primary rotation) and the rolling of particles over the surface and separation after rolling. The critical wind velocities calculated for these two scenarios have made it possible to describe the probable states of surface particles as a function of wind velocity at the surface.     

Temporal Variability of Total Ozone in the Asian Region Inferred from Ground-Based and Satellite Measurement Data

This paper reports investigation data on the temporal variability of total ozone content (TOC) in the Central Asian and Tibet Plateau mountain regions obtained by conventional methods, as well as by spectral, cross-wavelet, and composite analyses. The data of ground-based observation stations located at Huang He, Kunming, and Lake Issyk-Kul, along with the satellite data obtained at SBUV/SBUV2 (SBUV merged total and profile ozone data, Version 8.6) for 1980–2013 and OMI (Ozone Monitoring Instrument) and TOU (Total Ozone Unit) for 2009–2013 have been used. The average relative deviation from the SBUV/SBUV2 data is less than 1% in Kunming and Issyk-Kul for the period of 1980–2013, while the Huang He Station is characterized by an excess of the satellite data over the ground-based information at an average deviation of 2%. According to the Fourier analysis results, the distribution of amplitudes and the periods of TOC oscillations within a range of over 14 months is similar for all series analyzed. Meanwhile, according to the cross-wavelet and composite analyses results, the phase relationships between the series may considerably differ, especially in the periods of 5–7 years. The phase of quasi-decennial oscillations in the Kunming Station is close to the 11-year oscillations of the solar cycle, while in the Huang He and Issyk-Kul stations the TOC variations go ahead of the solar cycle.     

Estimating the reproduction quality of precipitation over the north atlantic and influence of the hydrostatic approximation in the WRF–ARW atmospheric model

The Weather Research and Forecast numerical model (WRF) with the dynamic Advanced Research WRF (ARW) solver was used to simulate the winter (January 2016) and summer (July 2015) atmospheric state over the North Atlantic with a high (15 km) spatial resolution. The quality of precipitation modeling was validated by remote sensing Global Precipitation Measurements (GPM) data and atmospheric ERA-Interim reanalysis. Nonhydrostatic and hydrostatic equations for the vertical velocity were additionally used to investigate their influence on the accuracy of the precipitation modeling results. It was shown that the model in this configuration satisfactorily reproduces the precipitation field. No evidence of hydrostatic approximation was revealed (over a simulation domain with a resolution of 15 km, simplified topography, and parameterizations of convection and microphysical processes).     

Features of Manifestation of the Chilean Tsunami on April 1, 2014, and September 16, 2015, on Russia’s Pacific Coast

As a result of mooring of autonomous seabed stations in bays of Shikotan Island, the records of two tsunamis were obtained from strong earthquakes that occurred off the coast of Chile on April 1, 2014, and September 16, 2015. In both cases, prolonged intense vibrations with a pronounced group structure were observed in various bays, mainly with periods of the main modes of resonance oscillations. The second event was more dangerous, and the wave height was 0.9 m at Malokurilskaya Bay. The increase in the energy of fluctuations in 2015 was more significant, manifesting itself in a wider range of periods. Numerical simulation of the tsunami showed that the nature of wave propagation in both earthquakes was identical in the northern part of the Pacific Ocean, approaching Russia’s Pacific coast, and was characterized by weak damping, in contrast to waves propagating to the south and southwest. This explains why expect large waves can be expected on the coasts of the Kurils from earthquakes off the coast of South America, despite the considerable distance.     

Deltaic soil behavior classification using CPTu records—Proposed approach and applied to fifty-four case histories

For the past four decades, the CPT has played a key role in onshore and offshore soil investigations. One of the main applications of cone penetration test (CPT) is the soil behavioral classification. Most of the developed methods for soil identification using CPT and CPTu (piezocone) data are well categorized for common soils, such as clays, silts, and sands. Soils with low resistance or more compressibility generally involve problems in geotechnical engineering practice and construction projects. Consequently, these unusual deposits require further evaluation and more detailed data. Five major groups of problematic soils including: liquefiable, sensitive, peaty, collapsible, and expansive soils have been considered in this study. One hundred and forty CPT and CPTu test records were collected from fifteen countries. Sixty-one of the records are related to difficult soils. A brief comparison is performed for currently used soil behavioral classification charts, such as by Campanella et al. (1985 Campanella, R. G., P. K. Robertson, D. Gillespie, and J. Greig. 1985. Recent developments in in-situ testing of soils. Proceedings of 11th International Conference on Soil Mechanics and Foundation Engineering, ICSMFE, San Francisco, Vol. 2, 849–54. [Google Scholar]), Robertson (1990 Robertson, P. K. 1990. Soil classification using the cone penetration test. Canadian Geotechnical Journal 27 (1):151–58. doi:10.1139/t90–014[Crossref], [Web of Science ®] , [Google Scholar]), Jefferies and Davies (1991 Jefferies, M. G., and M. P. Davies. 1991. Soil classification using the cone penetration test: Discussion. Canadian Geotechnical Journal 28 (1):173–76. doi:10.1139/t91–023[Crossref], [Web of Science ®] , [Google Scholar]) and Eslami and Fellenius (1997 Eslami, A., and B. H. Fellenius. 1997. Pile capacity by direct CPT and CPTu methods applied to 102 case histories. Canadian Geotechnical Journal 34 (6):886–904. doi:10.1139/cgj-34–6-886[Crossref], [Web of Science ®] , [Google Scholar]). Analysis based on CPT data indicates that a few commonly used charts recognize relatively well problematic deposits. However, further studies are needed to increase the accuracy and capability of methods. Existing charts have some problems due to the limitations of the nature of rectangular charts based on two axes. A new format of classification chart, i.e., triangular form containing cone tip resistance (q_c), sleeve friction (f_s), and pore pressure (u₂) is proposed for soil identification which can be realized in practice. The proposed chart with more accuracy and less scattering of data than the previous charts is able to identify soil types particularly for deltaic soils.     

Microbial activity promotes the enrichment of cobalt over nickel on hydrogenetic ferromanganese crusts

The different mineral phases of the ferromanganese (Fe–Mn) crusts stem from the interaction of biotic and abiotic components. It is therefore vital to study the activity of these components to decipher their contribution to the enrichment/depletion of metals in the crust. Thus, the present study examined sorption and release of Co and Ni by Fe-Mn crusts with associated microbial communities in the presence and absence of the metabolic poison sodium azide (15?mM). The study was conducted in the presence (G⁺) and absence (G^?) of added glucose (0.1%) at temperatures of 4?±?1°C and 28?±?2°C. Results showed that the microbial community had maximal sorption of Co of 66.12?µg?g^?1 at 4?±?1°C in the absence of added glucose and 479.75?µg?g^?1 at 28?±?2°C in the presence of added glucose. Maximum sorption of Ni in the absence of added glucose was 1.89?µg?g^?1 at 4?±?1°C and release of Ni was 51.28?µg?g^?1 in the presence of added glucose. Under abiotic conditions with 15?mM sodium azide as a metabolic inhibitor, significant amounts of Co and Ni were released in the G⁺ medium. Total cell counts on the Fe-Mn crust in the presence of added glucose increased by an order of magnitude from 10⁶ to 10⁷ cells g^?1 and in the absence of added glucose remained within the order of 10⁶ cells?g^?1 irrespective of temperature of incubation. Microscopic observation of the samples from biotic incubations showed numerous bacterial cells, exopolysaccharides, and structures resembling secondary minerals formed by bacteria. The results indicate that bacteria promote the enrichment of Co and Ni on the hydrogenetic Fe-Mn crusts by sorption processes and release of Ni by reductive dissolution of the oxides. The higher enrichment of Co than Ni is attributed to the way in which microbes interact with the metals.