Hydraulic performance of vertical walls with horizontal slots used as breakwater

The hydrodynamic performance of a vertical wall with permeable lower part (horizontal slots) was experimentally and theoretically studied under normal regular waves. The effect of different wave and structural parameters was investigated e.g. the wave length, the upper part draft, and the lower part porosity. Also, the theoretical model based on an Eigen Function Expansion Method and a Least Square Technique was developed. In order to examine the validity of the theoretical model, the theoretical results were compared with the present experimental results and with the results obtained from different previous studies. Comparison between experiments and predictions showed that the theoretical model provides a good estimate of the wave transmission, reflection, and energy dissipation coefficients when the friction factor f = 5.5. In general, the tested model gives transmission coefficients less than 0.5 and reflection coefficients larger than 0.5 when the relative wave length h/L is larger than 0.3, the relative upper part draft D/h larger than 0.36, and lower part porosity ε less than 0.5. Also, the tested model dissipates about 50% of the incident wave energy when the relative wave length h/L is in the range of 0.25 to 0.35.     

Water flooding of the Oseberg Øst oil field,Norwegian North Sea: Application of formation water chemistry and isotopic composition for production monitoring

This case study demonstrates how natural heterogeneities of formation and injection waters can be applied to a number of production related applications, extending into the mature life of a reservoir. Break-through of injection water, identification and characterisation of production intervals and evaluation of responses to operational events are some of the possible applications during production.The Oseberg Øst oil field in the North Sea represents a complex situation with commingled production from all Brent Group formations. The Sr isotope composition is an excellent parameter for defining the natural baseline of formation water, with a good spatial resolution and vertical stratification. Aquifer water from the Utsira Formation is injected for pressure support, and reinjection of produced water has also been applied since the onset of water production. Utsira Formation water has high Mg, low Ba and low Sr content compared to the reservoir formation waters. Isotopic compositions (δD and ⁸⁷Sr/⁸⁶Sr) are also distinct. A non-reactive behaviour of Ba and Sr is verified from binary cross-plots and geochemical modelling. Break-through of injection water could be identified in five production wells based on Ba/Mg ratios. In one of the reservoir compartments (Beta Saddle), water injection points were changed after approximately three years. The Ba/Mg ratio could also identify the second injection water break-through in one of the wells due to an intermediate period of higher formation water content. Since the Sr content in the Utsira water is low, the ⁸⁷Sr/⁸⁶Sr ratio is a good natural tracer for formation water movements even at high ratios of injected water. In particular, the vertical stratification of ⁸⁷Sr/⁸⁶Sr is useful for quantifying production from different intervals in commingled wells. A methodology for using operational events, such as production allocations or shut-ins, for characterisation of production zones is discussed.     

Education and training for integrated coastal zone management in Europe

This paper provides an overview of the current situation of education and training for ICZM in Europe. This overview results from the analysis of the general characteristics, contents and orientation of a significant number of courses from a representative set of countries and international organizations in Europe. This type of comparatively systematic information provides a framework within which education and training efforts can be meaningfully evaluated from a regional perspective. Based on the survey conclusions, the paper reflects on the level of interconnection between the way in which ICZM is currently taught in Europe and the capacity needs arising from the scenario in which it takes place. In view of such scenario, and in order to advance ICZM practice in Europe, some broad recommendations to enhance education and training efforts are finally provided.     

Short-term environmental variability in cold-water coral habitat at Viosca Knoll,Gulf of Mexico

The Lophelia pertusa community at Viosca Knoll (VK826) is the most extensive found to date in the Gulf of Mexico. As part of a multi-disciplinary study, the physical setting of this area was described using benthic landers, CTD transects and remotely operated vehicle observations. The site was broadly characterised into three main habitats: (1) dense coral cover that resembles biogenic reef complexes, (2) areas of sediment, and (3) authigenic carbonate blocks with sparse coral and chemosynthetic communities. The coral communities were dominated by L. pertusa but also contained numerous solitary coral species. Over areas that contained L. pertusa, the environmental conditions recorded were similar to those associated with communities in the north-eastern Atlantic, with temperature (8.5–10.6 °C) and salinity (～35) falling within the known species niche for L. pertusa. However, dissolved oxygen concentrations (2.7–2.8 ml l^?1) and density (σ_Θ, 27.1–27.2 kg m^?3) were lower and mass fluxes from sediment trap data appeared much higher (4002–4192 mg m^?2 d^?1). Yet, this species still appears to thrive in this region, suggesting that L. pertusa may not be as limited by lower dissolved oxygen concentrations as previously thought. The VK826 site experienced sustained eastward water flow of 10–30 cm s^?1 over the 5-day measurement period but was also subjected to significant short-term variability in current velocity and direction. In addition, two processes were observed that caused variability in salinity and temperature; the first was consistent with internal waves that caused temperature variations of 0.8 °C over 5–11 h periods. The second was high-frequency variability (20–30 min periods) in temperature recorded only at the ALBEX site. A further pattern observed over the coral habitat was the presence of a 24 h diel vertical migration of zooplankton that may form part of a food chain that eventually reaches the corals. The majority of detailed studies concerning local environmental conditions in L. pertusa habitats have been conducted within the north-eastern Atlantic, limiting most knowledge of the niche of this species to a single part of an ocean basin. Data presented here show that the corals at VK826 are subjected to similar conditions in temperature, salinity, and flow velocity as their counterparts in the north-east Atlantic, although values for dissolved oxygen and density (sigma-theta: σ_Θ) are different. Our data also highlight novel observations of short-term environmental variability in cold-water coral habitat.     

Sediment bioavailable organic matter,deposition rates and mixing intensity in the Setúbal–Lisbon canyon and adjacent slope (Western Iberian Margin)

The role of the Setúbal–Lisbon canyon in accumulation and transport of labile organic matter from the coastal sea and ocean surface water towards the deep sea was assessed by investigating the distribution of organic matter of different quality in sedimentary aggregates and surface sediments of the canyon and adjacent slopes. Total hydrolysable amino acids (THAA) and organic carbon (Corg) were measured from aggregates, and contents of Corg, chlorophyll a (chl a), phaeopigments (phaeo), chloroplastic pigment equivalents (CPE) from sediments. As indices of organic matter (OM) quality THAA:Corg, degradation index (DI), chl a:phaeo, chl a:Corg and C:N ratio were determined. Sediment profiles of chl a and the isotope 210 of lead (²¹⁰Pb) were used as tracers in a transport model to estimate deposition rates and background levels of the tracers, and sediment mixing rates (Db). Whereas bulk Corg contents of canyon and slope sediments were practically similar at all depths, higher contents of THAA, chl a and CPE, as well as higher THAA:Corg, DI and chl a:Corg, in aggregates and sediments from the upper reaches of the canyon indicate that labile organic matter accumulates in the upper canyon. This is confirmed by higher chl a and ²¹⁰Pb deposition and Db calculated from the model. Hence, the Setúbal–Lisbon canyon, specially the upper region, acts as a natural trap of organic matter that is transported to the region via lateral transport and vertical settling from primary productivity. Organic matter might be further transported in downward canyon direction via rebound processes. The chl a and ²¹⁰Pb profiles reveal active sediment mixing by physical processes and/or animal reworking.     

Terminal velocities of pure and hydrate coated CO2 droplets and CH4 bubbles rising in a simulated oceanic environment

Understanding the upward motion of CO₂ droplets or CH₄ bubbles in oceanic waters is prerequisite to predict the vertical distribution of the two most important greenhouse gases in the water column after these have been released from the seabed. One of the key parameters governing the fate of droplets or bubbles dissolving into the surrounding seawater as they rise, is the terminal velocity, u_T. The latter is strongly influenced by the ability of both compounds to form skins of gas hydrate, if pressure and temperature satisfy thermodynamic framework conditions. Experimental efforts aiming to elucidate the rise properties of CO₂ droplets and CH₄ bubbles and specifically the influence of hydrate skins open the possibility to obtain a parameterization of u_T applicable to both hydrate-coated and pure fluid particles of CH₄ and CO₂. With the present study, we report on experimentally determined terminal velocities of single CH₄ bubbles released to pressurized and temperature-regulated seawater. Hydrate skins were identified by high bubble sphericities and changed motion characteristics. Based on these experiments as well as published data on the rise of hydrate-coated and pure liquid CO₂ droplets and physical principles previously successfully used for clean bubbles near atmospheric pressures, a new parameterization of u_T is proposed. Model predictions show a good agreement with the data base established from the laboratory-based measurements.     

Nitrogen inputs to seventy-four southern New England estuaries: Application of a watershed nitrogen loading model

Excess nitrogen inputs to estuaries have been linked to deteriorating water quality and habitat conditions which in turn have direct and indirect impacts on aquatic organisms. This paper describes the application of a previously verified watershed loading model to estimate total nitrogen loading rates and relative source contributions to 74 small-medium sized embayment-type estuaries in southern New England. The study estuaries exhibited a gradient in nitrogen inputs of a factor of over 7000. On an areal basis, the range represented a gradient of approximately a factor of 140. Therefore, all other factors being equal, the study design is sufficient to evaluate ecological effects conceptually tied to excess nitrogen along a nitrogen gradient. In addition to providing total loading inputs rates to the study estuaries, the model provides an estimate of the relative contribution of the nitrogen sources from each watershed to each associated estuary. Cumulative results of this analysis reveal the following source ranking (means): direct atmospheric deposition (37%), ≈wastewater (36%), >indirect atmospheric deposition (16%) > fertilizer (12%). However, for any particular estuary the relative magnitudes of these source types vary dramatically. Together with scientific evidence on symptoms of eutrophication, the results of this paper can be used to develop empirical pressure-state models to determine critical nitrogen loading limits for the protection of estuarine water quality.     

Control of Aptian palaeobathymetry on turbidite distribution in the Buchan Graben,Outer Moray Firth,Central North Sea

It is widely recognised that palaeobathymetry is a key control on the distribution of turbidite deposits. Thus, the utilisation of palaeobathymetric surfaces as an input for numerical turbidity current modelling offers a potentially powerful method to predict the distribution of deep marine sands in ancient (subsurface or outcrop) successions. Such an approach has been tested on an Aptian turbidite deposit from the Buchan Graben, UK Central North Sea, where modelled sand distributions could be quality controlled against available well data.     

Structurally controlled hydrothermal dolomites in Albian carbonates of the Asón valley,Basque Cantabrian Basin,Northern Spain

Shallow marine carbonate sedimentation dominated during the Albian in the western part of the Basque Cantabrian Basin in Northern Spain, forming the large Ramales Platform. This platform originated on a less subsiding tectonic block facing deeper and more subsiding areas to the south and east, which were created by tectonic activity in the Basin. Fracture-related hydrothermal dolomites hosted in these Albian carbonates are well exposed in the Asón valley area. Mapping in the studied area revealed several dolomite bodies related to main faults that cut the stratification almost at right angles. The bodies show a vertical development along fault-strike up to 900 m thick from which kilometre-scale branches expand following the stratification. Dolomitization is pervasive and independent of the limestone facies. Main dolomite facies are fine replacive, sucrosic and saddle. Petrography, C, O and Sr isotopes and fluid-inclusion analysis support a polyphase hydrothermal dolomitization at fluid temperatures between 75 °C and 240 °C and highly variable salinity of up to 22 wt.% NaCl. Fine dolomite replaced limestone first and then, sucrosic and saddle dolomites replaced part of the first dolomite and cemented newly created fracture porosity together with different calcite cements. Zebra dolomites and hydroclastic breccias are products of this later stage. Burial analysis of the host rock supports maximum burial temperatures of 80 °C and intense tectonic activity from the Albian to Turonian with a latest Albian peak subsidence. Albian stretching of the crust and subsequent ascent of the isotherms in the area is suggested to have produced sufficient heat to the dolomitizing fluids. The structural analysis indicates a strong transtensional tectonic activity in the studied area during Albian to Turonian time with the creation of an overstep between W–E trending and N–S trending faults. Fluids moved from subsiding areas to fractured uplifted parts of the Ramales Platform, enhanced by diapiric activity.     

Origin of transverse folds in an extensional growth-fault setting: Evidence from an extensive seismic volume in the western Gulf of Mexico

Growth faults in gravity-driven extensional provinces are dominated by coast-parallel trends, but coast-perpendicular (transverse) trends are far less documented. The Clemente–Tomas fault in the inner Texas shelf has corrugations that are transverse to the fault and that plunge downdip. A large (8500 km²), high-quality, 3D seismic survey allows a uniquely encompassing perspective into hanging-wall deformation above this corrugated fault surface. Synextensional strata in the hanging wall are folded into alternating transverse ridges and synclines, typically spaced 10 km apart. Forward modelling in dip profiles of an extensional fault having three ramps produces ramp basin-rollover pairs that compare with the seismically revealed ridges and synclines. As they translated down the undulose fault plane, ramp basins and rollovers were juxtaposed along strike, forming the hanging-wall ridges and synclines observed offshore Texas. Fault-surface corrugations correlate broadly with footwall structure. We infer that corrugations on the Clemente–Tomas fault formed by evacuation of an allochthonous salt canopy emplaced in the late Eocene to early Oligocene. Early salt evacuation (Oligocene) created an undulose topography that influenced incipient Clemente-Tomas fault segments as they merged to form an inherently undulose fault. Late salt evacuation (early Miocene) further deformed this fault surface.