Spectrophotometric variability of the magnetic CP star 56 Arietis in spectral region from 1950 to 3200 Å

We presented a phenomenological mode that attributes the precession of perihelion of planets to the relativistic correction. This modifies Newton’s equation by adding an inversely cube term with distance. The total energy of the new system is found to be the same as the Newtonian one. Moreover, we have deduced the deflection of light formula from Rutherford scattering. The relativistic term can be accounted for quantum correction of the gravitational potential and/or self energy of objects.     

A major lava tube system from Undara Volcano,North Queensland

The Undara Volcano erupted 0.19 m.y. ago and formed lava fields covering 1,500 km² with a volume of approximately 23 km³. One of the flows extended 160 km on a gradient that averaged only 0.3°. This great length was a result of very high effusion rates, favourable topography and lava tube efficiency. The Undara lavas are rather uniform hawaiites. Lava temperatures are estimated to have been somewhat less than 1175–1220°C and viscosities greater than 10 to 30 Pa s. Long, apparently single lava tubes are well preserved in many places. They are marked by depressions, caves and long level ridges. A system of lava tubes extends for perhaps more than 100 km. The features of the lava tubes are comparable with those described elsewhere. Aligned depressions associated with caves appear to have formed contemporaneously. Most are much wider than the caves and probably represent collapsed lava ponds. The lava tubes appear to have formed by roofing over of lava channels. Close to lava tubes, the rocks developed strongly oxidised characteristics, such as oxidised olivine phenocrysts, ferric clinopyroxene and extensively developed hematite. Differentiated lava forms drips in some caves and is also oxidised.     

Geomorphic changes in Ras Al-Subiyah area,Kuwait

The Ras Al-Subiyah area is considered one of the most promising areas in Kuwait for future development. This development will include a new town called Subiyah and its associated infrastructure. This area is also being considered as the location for connection between Boubyan Island, which is now undergoing major development and the Kuwait mainland. The present study investigates the geomorphology of the Ras Al-Sabiyah area in the northern sector of Kuwait. The study area is generally flat, and it is located west of the Jal Az-Zor escarpment. It is bordered on the east by the Khor Al-Sabiyah tidal channel and on the south by Kuwait Bay. The area receives sediments from several sources; currently the most important are aeolian sediments and the deposition of mud delivered through the Khor Al-Sabiyah from the Iraqi marshes. The study area has been subjected to severe environmental changes due to the Gulf wars and the drainage of Iraqi marshes and the associated artificial changes in fluvial system. Twenty-two surface sediments were collected from the Ras Al-Subiyah area. Samples were collected to include the main geomorphologic characteristic features of the study area. Field observations and remote sensing images from 1990 and 2001 were used to produce an updated geomorphologic map for the Ras Al-Subiyah and a map showing geomorphic changes between 1990 and 2001. Grain size of the surface sediment ranges from gravel to medium sand. In general, grain size statistical analysis indicates that most of the areas are composed of two or more classes of sands transported and deposited from different sources including aeolian, sabkhas, river and the bays. The variability in the grain size statistical parameters may be attributed to the complexity of surface morphology as well as the diversity in the type of depositional environment in the Ras Al-Subiyah area. The total area subjected to change during the 12-year period (1990–2001) is about 32 km² as calculated using GIS techniques.     

New Method for Continuous Transmissivity Profiling in Fractured Rock

A new method is presented to search for hydraulically transmissive features in open boreholes in bedrock. A flexible borehole liner made of a watertight, nylon fabric is filled with water to create a constant driving head to evert (reverse of invert) the liner down the hole so that the liner pushes the borehole water out into transmissive fractures or other permeable features. The descent rate is governed by the bulk transmissivity of the remaining permeable features below the liner. Initially, the liner descent rate or velocity is a measure of transmissivity (T) of the entire hole. As the everting liner passes and seals each permeable feature, changes in the liner velocity indicate the position of each feature and an estimate of T using the Thiem equation for steady radial flow. This method has been performed in boreholes with diameters ranging from 96 to 330 mm. Profiling commonly takes a few hours in holes 200‐ to 300‐m long. After arrival of the liner at the bottom of the hole, the liner acts as a seal preventing borehole cross connection between transmissive features at different depths. Liner removal allows the hole to be used for other purposes. The T values determined using this method in a dolostone aquifer were found to be similar to the values from injection tests using conventional straddle packers. This method is not a replacement for straddle‐packer hydraulic testing of specific zones where greater accuracy is desired; however, it is effective and efficient for scanning entire holes for transmissive features.     

The New Multichannel Radiospectrograph ARTEMIS-IV/HECATE, of the University of Athens

We present the new solar radiospectrograph of the University of Athensoperating at the Thermopylae Station since 1996. Observations cover thefrequency range from 110 to 688 MHz. The radiospectrograph has a 7-meterparabolic antenna and two receivers operating in parallel. One is a sweepfrequency receiver and the other a multichannel acousto-optical receiver.The data acquisition system consists of a front-end VME based subsystem anda Sun Sparc-5 workstation connected through Ethernet. The two subsystems areoperated using the VxWorks real-time package. The daily operation is fullyautomated: pointing of the antenna to the sun, starting and stopping theobservations at pre-set times, data acquisition, data compression by`silence suppression', and archiving on DAT tapes. The instrument can beused either by itself to study the onset and evolution of solar radio bursts or in conjunction with other instruments including theNançay Decametric Array and the WIND/WAVES RAD1 and RAD2 low frequencyreceivers to study associated interplanetary phenomena.     

Flexure of Europa's lithosphere due to ridge-loading

Using photoclinometry, topographic profiles across europan ridges have been produced. These profiles allow the identification of bulges in the terrain adjacent to the ridges. The bulges are assumed to have been produced by flexure of the elastic lithosphere due to the load of the ridges, which lie along cracks in the crust. The distance from the crack to these “fore-bulges” depends on the thickness of the elastic plate being flexed. Based on a survey of ridges in Galileo images with resolution <300 m/pixel, the thickness of the elastic lithosphere has been determined by this method at a wide variety of sites along the leading and trailing hemispheres of Europa. The average thickness is about 200 m. The elastic lithosphere underneath smooth dilational bands tends to be thicker than plains morphology, an effect that is pronounced at Thynia Linea and Astypalaea Linea. Among the ridges investigated here, more recent loading correlates with a thicker elastic lithosphere, which may either reflect an intrinsically thicker layer, or less viscous relaxation over the shorter time period.     

Fluid sources for the La Guitarra epithermal deposit (Temascaltepec district, Mexico): Volatile and helium isotope analyses in fluid inclusions

The La Guitarra deposit (Temascaltepec district, South-Central Mexico), belongs to the low/intermediate sulfidation epithermal type, has a polymetallic character although it is currently being mined for Ag and Au. The mineralization shows a polyphasic character and formed through several stages and sub-stages (named I, IIA, IIB, IIC, IID, and III). The previous structural, mineralogical, fluid inclusion and stable isotope studies were used to constrain the selection of samples for volatile and helium isotope analyses portrayed in this study. The N₂/Ar overall range obtained from analytical runs on fluid inclusion volatiles, by means of Quadrupole Mass Spectrometry (QMS), is 0 to 2526, and it ranges 0 to 2526 for stage I, 0 to 1264 for stage IIA, 0 to 1369 for stage IIB, 11 to 2401 for stage IIC, 19 to 324 for stage IID, and 0 to 2526 for stage III. These values, combined with the CO₂/CH₄ ratios, and N₂-He-Ar and N₂-CH₄-Ar relationships, suggest the occurrence of fluids from magmatic, crustal, and shallow meteoric sources in the forming epithermal vein deposit. The helium isotope analyses, obtained by means of Noble Gas Mass Spectrometry, display R/Ra average values between 0.5 and 2, pointing to the occurrence of mantle-derived helium that was relatively diluted or “contaminated” by crustal helium. These volatile analyses, when correlated with the stable isotope data from previous works and He isotope data, show the same distribution of data concerning sources for mineralizing fluids, especially those corresponding to magmatic and crustal sources. Thus, the overall geochemical data from mineralizing fluids are revealed as intrinsically consistent when compared to each other.The three main sources for mineralizing fluids (magmatic, and both deep and shallow meteoric fluids) are accountable at any scale, from stages of mineralization down to specific mineral associations. The volatile and helium isotope data obtained in this paper suggest that the precious metal-bearing mineral associations formed after hydrothermal pulses of predominantly oxidized magmatic fluids, and thus it is likely that precious metals were carried by fluids with such origin. Minerals from base-metal sulfide associations record both crustal and magmatic sources for mineralizing fluids, thus suggesting that base metals could be derived from deep leaching of crustal rocks. At the La Guitarra epithermal deposit there is no evidence for an evolution of mineralizing fluids towards any dominant source. Rather than that, volatile analyses in fluid inclusions suggest that this deposit formed as a pulsing hydrothermal system where each pulse or set of pulses accounts for different compositions of mineralizing fluids.The positive correlation between the relative content of magmatic fluids (high N₂/Ar ratios) and H₂S suggests that the necessary sulfur to carry mostly gold as bisulfide complexes came essentially from magmatic sources. Chlorine necessary to carry silver and base metals was found to be abundant in inclusion fluids and although there is no evidence about its source, it is plausible that it may come from magmatic sources as well.     

Seismic demand models for probabilistic risk analysis of near fault vertical ground motion effects on ordinary highway bridges

The influence of vertical ground motions on the seismic response of highway bridges is not very well understood. Recent studies suggest that vertical ground motions can substantially increase force and moment demands on bridge columns and girders and cannot be overlooked in seismic design of bridge structures. For an evaluation of vertical ground motion effects on the response of single‐bent two‐span highway bridges, a systematic study combining the critical engineering demand parameters (EDPs) and ground motion intensity measures (IMs) is required. Results of a parametric study examining a range of highway bridge configurations subjected to selected sets of horizontal and vertical ground motions are used to determine the structural parameters that are significantly amplified by the vertical excitations. The amplification in these parameters is modeled using simple equations that are functions of horizontal and vertical spectral accelerations at the corresponding horizontal and vertical fundamental periods of the bridge. This paper describes the derivation of seismic demand models developed for typical highway overcrossings by incorporating critical EDPs and combined effects of horizontal and vertical ground motion IMs depending on the type of the parameter and the period of the structure. These models may be used individually as risk‐based design tools to determine the probability of exceeding the critical levels of EDP for pre‐determined levels of ground shaking or may be included explicitly in probabilistic seismic risk assessments. Copyright © 2011 John Wiley & Sons, Ltd.