Dissolution/precipitation kinetics of boehmite and gibbsite: Application of a pH-relaxation technique to study near-equilibrium rates

The dissolution and precipitation rates of boehmite, AlOOH, at 100.3 °C and limited precipitation kinetics of gibbsite, Al(OH)₃, at 50.0 °C were measured in neutral to basic solutions at 0.1 molal ionic strength (NaCl + NaOH + NaAl(OH)₄) near-equilibrium using a pH-jump technique with a hydrogen-electrode concentration cell. This approach allowed relatively rapid reactions to be studied from under- and over-saturation by continuous in situ pH monitoring after addition of basic or acidic titrant, respectively, to a pre-equilibrated, well-stirred suspension of the solid powder. The magnitude of each perturbation was kept small to maintain near-equilibrium conditions. For the case of boehmite, multiple pH-jumps at different starting pHs from over- and under-saturated solutions gave the same observed, first order rate constant consistent with the simple or elementary reaction: .

This relaxation technique allowed us to apply a steady-state approximation to the change in aluminum concentration within the overall principle of detailed balancing and gave a resulting mean rate constant, (2.2 ± 0.3) × 10⁻⁵ kg m⁻² s⁻¹, corresponding to a 1σ uncertainty of 15%, in good agreement with those obtained from the traditional approach of considering the rate of reaction as a function of saturation index. Using the more traditional treatment, all dissolution and precipitation data for boehmite at 100.3 °C were found to follow closely the simple rate expression:

R_net,boehmite=10^-5.485{m_OH^-}{1-exp(ΔG_r/RT)}, with R_net in units of mol m⁻² s⁻¹. This is consistent with Transition State Theory for a reversible elementary reaction that is first order in OH⁻ concentration involving a single critical activated complex. The relationship applies over the experimental ΔG_r range of 0.4–5.5 kJ mol⁻¹ for precipitation and −0.1 to −1.9 kJ mol⁻¹ for dissolution, and the pH_m ≡ −log(mH⁺) range of 6–9.6. The gibbsite precipitation data at 50 °C could also be treated adequately with the same model:R_net,gibbsite=10^-5.86{m_OH^-}{1-exp(ΔG_r/RT)}, over a more limited experimental range of ΔG_r (0.7–3.7 kJ mol⁻¹) and pH_m (8.2–9.7).     

Formation of Zn–Ca phyllomanganate nanoparticles in grass roots

It is now well established that a number of terrestrial and aquatic microorganisms have the capacity to oxidize and precipitate Mn as phyllomanganate. However, this biomineralization has never been shown to occur in plant tissues, nor has the structure of a natural Mn(IV) biooxide been characterized in detail. We show that the graminaceous plant Festuca rubra (red fescue) produces a Zn-rich phyllomanganate with constant Zn:Mn and Ca:Mn atomic ratios (0.46 and 0.38, respectively) when grown on a contaminated sediment. This new phase is so far the Zn-richest manganate known to form in nature (chalcophanite has a Zn:Mn ratio of 0.33) and has no synthetic equivalent. Visual examination of root fragments under a microscope shows black precipitates about ten to several tens of microns in size, and their imaging with backscattered and secondary electrons demonstrates that they are located in the root epidermis. In situ measurements by Mn and Zn K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy and X-ray diffraction (XRD) with a micro-focused beam can be quantitatively described by a single-phase model consisting of Mn(IV) octahedral layers with 22% vacant sites capped with tetrahedral and octahedral Zn in proportions of 3:1. The layer charge deficit is also partly balanced by interlayer Mn and Ca. Diffracting crystallites have a domain radius of 33 Å in the ab plane and contain only 1.2 layers (8.6 Å) on average. Since this biogenic Mn oxide consists mostly of isolated layers, basal 00l reflections are essentially absent despite its lamellar structure. Individual Mn layers are probably held together in the Mn–Zn precipitates by stabilizing organic molecules. Zinc biomineralization by plants likely is a defense mechanism against toxicity induced by excess concentrations of this metal in the rhizosphere.     

Seasonal patterns of carbon chemistry and isotopes in tufa depositing groundwaters of southwestern Japan

Annually laminated carbonates, known as tufas, commonly develop in limestone areas and typically record seasonal patterns of oxygen- and carbon-isotope compositions. δ¹⁸O values are principally controlled by seasonal changes of water temperature, whereas δ¹³C values are the result of complex reactions among the gaseous, liquid, and solid sources of carbon in the system. We examined the processes that cause the seasonal patterns of δ¹³C in groundwater systems at three tufa-depositing sites in southwestern Japan by applying model calculations to geochemical data. Underground inorganic carbon species are exchanged with gaseous CO₂, which is mainly introduced to the underground hydrological system by natural atmospheric ventilation and by diffusion of soil air. These processes control the seasonal pattern of δ¹³C, which is low in summer and high in winter. Among the three sites we investigated, we identified two extreme cases of the degree of carbon exchange between liquid and gaseous phases. For the case with high radiocarbon composition (Δ¹⁴C) and low pCO₂, there was substantial carbon exchange because of a large contribution of atmospheric CO₂ and a small water mass. For the other extreme case, which was characterized by low Δ¹⁴C and high pCO₂, the contribution of atmospheric CO₂ was small and the water mass was relatively large. Our results suggest that at two of the three sites water residence time within the soil profile was longer than 1 year. Our results also suggested a short residence time (less than 1 year) of water in the soil profile at the site with the smallest water mass, which is consistent with large seasonal amplitude of the springwater temperature variations. The Δ¹⁴C value of tufas is closely related to the hydrological conditions in which they are deposited. If the initial Δ¹⁴C value of a tufa-depositing system is stable, ¹⁴C-chronology can be used to date paleo-tufas.     

Fractionation of Cu and Zn isotopes during adsorption onto amorphous Fe(III) oxyhydroxide: Experimental mixing of acid rock drainage and ambient river water

Fractionation of Cu and Zn isotopes during adsorption onto amorphous ferric oxyhydroxide is examined in experimental mixtures of metal-rich acid rock drainage and relatively pure river water and during batch adsorption experiments using synthetic ferrihydrite. A diverse set of Cu- and Zn-bearing solutions was examined, including natural waters, complex synthetic acid rock drainage, and simple NaNO₃ electrolyte. Metal adsorption data are combined with isotopic measurements of dissolved Cu (⁶⁵Cu/⁶³Cu) and Zn (⁶⁶Zn/⁶⁴Zn) in each of the experiments. Fractionation of Cu and Zn isotopes occurs during adsorption of the metal onto amorphous ferric oxyhydroxide. The adsorption data are modeled successfully using the diffuse double layer model in PHREEQC. The isotopic data are best described by a closed system, equilibrium exchange model. The fractionation factors (α_soln-solid) are 0.99927 ± 0.00008 for Cu and 0.99948 ± 0.00004 for Zn or, alternately, the separation factors (Δ_soln-solid) are −0.73 ± 0.08‰ for Cu and −0.52 ± 0.04‰ for Zn. These factors indicate that the heavier isotope preferentially adsorbs onto the oxyhydroxide surface, which is consistent with shorter metal-oxygen bonds and lower coordination number for the metal at the surface relative to the aqueous ion. Fractionation of Cu isotopes also is greater than that for Zn isotopes. Limited isotopic data for adsorption of Cu, Fe(II), and Zn onto amorphous ferric oxyhydroxide suggest that isotopic fractionation is related to the intrinsic equilibrium constants that define aqueous metal interactions with oxyhydroxide surface sites. Greater isotopic fractionation occurs with stronger metal binding by the oxyhydroxide with Cu > Zn > Fe(II).     

Kinetics of Cd sorption, desorption and fixation by calcite: A long-term radiotracer study

Time-dependent sorption and desorption of Cd on calcite was studied over 210 days utilizing ¹⁰⁹Cd as a tracer to distinguish between ‘labile’ and ‘non-labile’ forms of sorbed Cd. Stabilizing the calcite suspensions for 12 months under atmospheric P_CO2 and controlled temperature was necessary to reliably follow Cd dynamics following initial sorption. Results revealed time-dependant Cd sorption and marked desorption hysteresis by calcite under environmentally relevant conditions. Data obtained were fitted to a first-order kinetic model and a concentric shell diffusion model. Both models described the progressive transfer of Cd²⁺ to a less reactive form within calcite and subsequent desorption of Cd subject to different initial contact times. The kinetic model provided a better fit to the combined sorption and desorption data (R² = 0.992). It differentiates between two ‘pools’ of sorbed Cd²⁺ on calcite, ‘labile’ and ‘non-labile’, in which labile sorbed Cd is in immediate equilibrium with the free Cd²⁺ ion activity in solution whereas non-labile Cd is kinetically restricted. For the diffusion model (R² = 0.959), the rate constants describing Cd dynamics in calcite produced a half-life for Cd desorption of ∼175 d, for release to a ‘zero-sink’ solution. Results from this study allow comment on the likely mechanisms occurring at the calcite surface following long-term Cd sorption.     

Cr-spinel/olivine and Cr-spinel/liquid nickel partition coefficients from natural samples

The Nernst partition coefficient of nickel (D^Ni) between Cr-spinel and silicate melt in natural systems has been investigated using mid-ocean ridge basalts (MORB) and other volcanic rocks. The Cr-spinel/olivine D^Ni values in volcanic rocks are between 1.2 and 0.3, indicating that the Cr-spinel/liquid D^Ni values vary from slightly higher to significantly lower than the olivine/liquid D^Ni values in natural systems. The Cr-spinel/liquid D^Ni values from the MORB samples vary between 6 and 11, slightly higher than those from the S-bearing experiments of Satari et al. [Satari P., Brenan J. M., Horn I. and McDonough W. F. (2002) Experimental constraints on the sulfide- and chromite-silicate melt partitioning behavior of rhenium and platinum-group elements. Economic Geology97, 385-398]. The results of the MORB samples and the experiments of Satari et al. (2002) indicate a negative correlation between the Cr-spinel/liquid D^Ni and the X_Cr values in Cr-spinels (Cr cation number on the basis of 3 total cations in the spinel structure). Variations of Cr-spinel/liquid D^Ni values with Cr-spinel compositions can be estimated from an empirical equation based on the results of the MORB samples and the experiments by Satari et al. (2002). The choice of Cr-spinel/liquid D^Ni = 10 for numerical modeling by Righter et al. [Righter K., Leeman W. P. and Hervig R. L. (2006) Partitioning of Ni, Co, and V between spinel-structured oxides and silicate melts: importance of spinel composition. Chemical Geology227, 1-25] is reasonable for basaltic systems. For picritic and komatiitic systems a lower value of ∼5 is more appropriate.     

Evidence for crustal degassing of CF4 and SF6 in Mojave Desert groundwaters

Dissolved tetrafluoromethane (CF₄) and sulfur hexafluoride (SF₆) concentrations were measured in groundwater samples from the Eastern Morongo Basin (EMB) and Mojave River Basin (MRB) located in the southern Mojave Desert, California. Both CF₄ and SF₆ are supersaturated with respect to equilibrium with the preindustrial atmosphere at the recharge temperatures and elevations of the Mojave Desert. These observations provide the first in situ evidence for a flux of CF₄ from the lithosphere. A gradual basin-wide enhancement in dissolved CF₄ and SF₆ concentrations with groundwater age is consistent with release of these gases during weathering of the surrounding granitic alluvium. Dissolved CF₄ and SF₆ concentrations in these groundwaters also contain a deeper crustal component associated with a lithospheric flux entering the EMB and MRB through the underlying basement. The crustal flux of CF₄, but not of SF₆, is enhanced in the vicinity of local active fault systems due to release of crustal fluids during episodic fracture events driven by local tectonic activity. When fluxes of CF₄ and SF₆ into Mojave Desert groundwaters are extrapolated to the global scale they are consistent, within large uncertainties, with the fluxes required to sustain the preindustrial atmospheric abundances of CF₄ and SF₆.     

Atomistic simulation of the mechanisms of noble gas incorporation in minerals

Atomistic simulations have been carried out to investigate the mechanisms of noble gas incorporation in minerals using both the traditional two-region approach and the “supercell” method. The traditional two-region approach has been used to calculate defect energies for Ne, Ar, Kr and Xe incorporation in MgO, CaO, diopside and forsterite in the static limit and at one atmosphere pressure. The possibilities of noble gas incorporation via both substitution and interstitial mechanisms are studied. The favored mechanism varies from mineral to mineral and from noble gas to noble gas. In all minerals studied, the variation of the solution energies of noble gas substitution with atomic radius appears approximately parabolic, analogous to those for 1⁺, 2⁺, 3⁺ and 4⁺ trace element incorporation on crystal lattice sites. Noble gas solution energies thus also fall on a curve, similar to those previously observed for cations with different charges, but with much lower curvature.The “supercell” method has been used to investigate the pressure dependence of noble gas incorporation in the same systems. Results indicate a large variation of the solubility of the larger noble gases, Kr and Xe with pressure. In addition, explicit simulation of incorporation at the (0 0 1) surface of MgO shows that the solubility of the heavier noble gases may be considerably enhanced by the presence of interfaces.     

Association of dissolved aluminum with silica: Connecting molecular structure to surface reactivity using NMR

We studied uptake mechanisms for dissolved Al on amorphous silica by combining bulk-solution chemistry experiments with solid-state Nuclear Magnetic Resonance techniques (²⁷Al magic-angle spinning (MAS) NMR, ²⁷Al{¹H} cross-polarization (CP) MAS NMR and ²⁹Si{¹H} CP-MAS NMR). We find that reaction of Al (1 mM) with amorphous silica consists of at least three reaction pathways; (1) adsorption of Al to surface silanol sites, (2) surface-enhanced precipitation of an aluminum hydroxide, and (3) bulk precipitation of an aluminosilicate phase. From the NMR speciation and water chemistry data, we calculate that 0.20 (±0.04) tetrahedral Al atoms nm⁻² sorb to the silica surface. Once the surface has sorbed roughly half of the total dissolved Al (∼8% site coverage), aluminum hydroxides and aluminosilicates precipitate from solution. These precipitation reactions are dependent upon solution pH and total dissolved silica concentration. We find that the Si:Al stoichiometry of the aluminosilicate precipitate is roughly 1:1 and suggest a chemical formula of NaAlSiO₄ in which Na⁺ acts as the charge compensating cation. For the adsorption of Al, we propose a surface-controlled reaction mechanism where Al sorbs as an inner-sphere coordination complex at the silica surface. Analogous to the hydrolysis of , we suggest that rapid deprotonation by surface hydroxyls followed by dehydration of ligated waters results in four-coordinate (>SiOH)₂Al(OH)₂ sites at the surface of amorphous silica.     

Anaerobic oxidation of methane (AOM) in marine sediments from the Skagerrak (Denmark): II. Reaction-transport modeling

A steady-state reaction-transport model is applied to sediments retrieved by gravity core from two stations (S10 and S13) in the Skagerrak to determine the main kinetic and thermodynamic controls on anaerobic oxidation of methane (AOM). The model considers an extended biomass-implicit reaction network for organic carbon degradation, which includes extracellular hydrolysis of macromolecular organic matter, fermentation, sulfate reduction, methanogenesis, AOM, acetogenesis and acetotrophy. Catabolic reaction rates are determined using a modified Monod rate expression that explicitly accounts for limitation by the in situ catabolic energy yields. The fraction of total sulfate reduction due to AOM in the sulfate-methane transition zone (SMTZ) at each site is calculated. The model provides an explanation for the methane tailing phenomenon which is observed here and in other marine sediments, whereby methane diffuses up from the SMTZ to the top of the core without being consumed. The tailing is due to bioenergetic limitation of AOM in the sulfate reduction zone, because the methane concentration is too low to engender favorable thermodynamic drive. AOM is also bioenergetically inhibited below the SMTZ at both sites because of high hydrogen concentrations (∼3-6 nM). The model results imply there is no straightforward relationship between pore water concentrations and the minimum catabolic energy needed to support life because of the highly coupled nature of the reaction network. Best model fits are obtained with a minimum energy for AOM of ∼11 kJ mol⁻¹, which is within the range reported in the literature for anaerobic processes.