Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.     

The spatial implications of the functional proximity deriving from air passenger flows between European metropolitan urban regions

Until recently the traditional spatial configuration of the European geography was based upon the core-periphery model. The ‘pentagon’, broadly defined as lying between London, Paris, Milan, Munich and Hamburg, was seen as the core area characterised by having the highest concentration of economic development in the European Union (EU), with the remainder of the European territory viewed as peripheral, albeit to varying degrees. In a number of cases such peripheral areas equated with clear regional disparities. The elaboration of the European Spatial Development Perspective (ESDP) (CEC, European spatial development perspective, towards balanced and sustainable development in the territory of the European Union, 1999) challenged this core-periphery model. European spatial planning policies, aimed at encouraging social and economic, and with ever increasing importance, territorial cohesion, seek amongst other aspects to encourage the development of a balanced and polycentric urban system. This paper adopts a network analysis approach to the analysis of air passenger flows between some 28 principal European metropolitan urban regions. The evaluation of these flows contributes to an enhanced comprehension of the spatial dynamics of the European metropolitan territory which goes beyond that deriving from the more standard analyses of the individual components of the urban system. Several indicators are used, deriving from gravitational modelling techniques, to analyse the complexity of the air passenger flows. A multidimensional scaling (MDS) technique is introduced in order to interpret and visualise the resulting spatial configuration and positioning of the different metropolitan centres within the conceptual European ‘space of air passenger flows’, thereby contrasting with the more traditional map-based geographical image of Europe, based upon Cartesian coordinates.

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

The effect of naturally acidified irrigation water on agricultural volcanic soils. The case of Asembagus, Java, Indonesia

Acid water from the Banyuputih river (pH  3.5) is used for the irrigation of agricultural land in the Asembagus coastal area (East Java, Indonesia), with harmful consequences for rice yields. The river water has an unusual composition which is caused by seepage from the acidic Kawah Ijen crater lake into the river. This unique irrigation setting allows the study of soil acidification in situ. This paper assesses the effects of volcanogenically contaminated irrigation water on the chemical properties of the agricultural soils.The changes in soil properties were evaluated by comparing samples taken from the topsoil and sub-soil (1–3 m depth) from areas irrigated with acid water and areas irrigated with neutral water. The field survey thus resulted in four soil categories. Bulk soil composition, organic matter content, moisture content and particle size distribution were determined. Reactive phases were quantified with the selective extractions 1 M KCl, 0.1 M Na-pyrophosphate and 0.2 M acid ammonium oxalate (AAO).By comparing the four soil categories it is shown that the use of the naturally polluted irrigation water has had a large influence on the chemical composition of the topsoil. The composition of the soil solution has changed over the entire investigated soil profile. Furthermore the acid irrigation water has strongly modified the composition of the reactive phases, extracted as KCl, pyrophosphate, and AAO extractable elements, and also the bulk soil composition has been significantly modified. Overall this has resulted in the net dissolution of some elements and the net precipitation of others. The changes in the reactive phases and bulk soil composition are only apparent in the topsoil (0–20 cm) but not in the deeper soil.     

Geostatistical estimation of chemical contamination in stream sediments: The case study of Vale das Gatas mine (northern Portugal)

Based on an environmental geochemistry case study carried out in the neighbourhood of a W–Sn abandoned mine, the pollution in stream sediments was modelled through a Global Contamination Index. Such an index permits one to summarize the combination of deleterious elements in a single variable, obtained by the projection of samples onto the first axis of a PCASD (Principal Components Analysis of Standardized Data) applied to the entire n × p matrix containing the available concentrations of p = 16 elements in the set of n = 220 collected samples.In order to provide a sound basis for a coherent planning of the remediation process which will be put in operation in the affected area, it is necessary to balance the costs of reclaiming with the probabilities of exceeding the upper limits accepted for concentrations of environmentally harmful elements in sediments. Given these limits, they are back-transformed in the index values, providing a practical threshold between ‘clean’ and ‘contaminated’ samples. On the other hand, the minimum dimension of the cell to be reclaimed is restrained by the selected remediation process to be applied in the affected area. Hence, to meet the constraints of such a remediation process, it is required to estimate the probabilities of exceeding the index threshold in technologically meaningful sub-areas. For this end, the Indicator Block Kriging technique was applied, producing a series of maps where sub-areas to be reclaimed can be spotted for different probability levels. These maps, on which the decision making remediation agency can rely for its cost-benefit analysis, take into account both the spatial structure of ‘clean’ vs. ‘contaminated’ samples and the constraints of the reclaiming process.     

Geological research at the Natural History Museum of Moscow University, 1759-1930 （in Russian）

In 2006, the Moscow publishing house Nauka （Science） published a 246-page book by Zoya A. Bessudnova entitled Geological Research at the Natural History. Museum of Moscow University, 1759-1930 as No. 32 in its series ＂Sketches on the History of Geological Knowledge＇. The author is a geologist and Senior Researcher in the Department for the History of Geology of the Vernadsky State Geological Museum of the Russian Academy of Sciences, and a member of the International Commission on the History of Geological Sci- ences （INHIGEO）.     

Ground motion estimation during the Kashmir earthquake of 8th October 2005

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.     

Integration and magnitude homogenization of the Egyptian earthquake catalogue

The aim of the present work is to compile and update a catalogue of the instrumentally recorded earthquakes in Egypt, with uniform and homogeneous source parameters as required for the analysis of seismicity and seismic hazard assessment. This in turn requires a detailed analysis and comparison of the properties of different available sources, including the distribution of events with time, the magnitude completeness, and the scaling relations between different kinds of magnitude reported by different agencies. The observational data cover the time interval 1900–2004 and an area between 22°–33.5° N and 25°–36° E. The linear regressions between various magnitude types have been evaluated for different magnitude ranges. Using the best linear relationship determined for each available pair of magnitudes, as well as those identified between the magnitudes and the seismic moment, we convert the different magnitude types into moment magnitudes M _W, through a multi-step conversion process. Analysis of the catalogue completeness, based on the M _W thus estimated, allows us to identify two different time intervals with homogeneous properties. The first one (1900–1984) appears to be complete for M _W ≥ 4.5, while the second one (1985–2004) can be considered complete for magnitudes M _W ≥ 3.     

Mineralogy and geochemistry of El Dorado epithermal gold deposit, El Sauce district, central-northern Chile

Summary The El Dorado Au-Cu deposit is located in an extensive intra-caldera zone of hydrothermal alteration affecting Upper Cretaceous andesites of the Los Elquinos Formation at La Serena (≈ 29°47′S Lat., 70°43′W Long., Chile). Quartz-sulfide veins of economic potential are hosted by N25W and N20E fault structures associated with quartz-illite alteration (+supergene kaolinite). The main ore minerals in the deposit are pyrite, chalcopyrite ± fahlore (As/(As + Sb): 0.06−0.98), with electrum, sphalerite, galena, bournonite-seligmanite (As/(As + Sb): 0.21−0.31), marcasite, pyrrhotite being accessory phases. Electrum, with an Ag content between 32 and 37 at.%, occurs interstitial to pyrite aggregates or along pyrite fractures. Pyrite commonly exhibits chemical zonation with some zones up to 1.96 at.% As. Electron probe microanalyses of pyrite indicate that As-rich zones do not exhibit detectable Au values. Fluid inclusion microthermometry shows homogenization temperatures between 130 and 352 °C and salinities between 1.6 and 6.9 wt.% NaCl eq. Isotope data for quartz, ankerite and phyllosilicates and estimated temperatures show that δ¹⁸O and δD for the hydrothermal fluids were between 3 and 10‰ and between −95 and −75‰, respectively. These results suggest the mineralizing fluids were a mixture of meteoric and magmatic waters. An epithermal intermediate-sulfidation model is proposed for the formation of the El Dorado deposit. Author’s present address: J. Carrillo-Rosúa, Dpto. de Didáctica de las Ciencias Experimentales, Universidad de Granada, Campus de Cartuja, 18071, Granada, Spain