Geothermal energy potential of Tulsishyam thermal springs of Gujarat,India

Tulsishyam thermal springs are located in the Saurashtra region of Gujarat, India with discharge temperatures varying from 39 to 42 °C. The pH of these thermal springs varies from 7.1 to 7.4, indicating neutral character. Though these thermal springs propagate through the near surface layer of Deccan basalt, detailed geochemical analysis of the thermal waters using Piper diagram suggests that the water is interacting with the granitic basement rock. Silica and cation geothermometry estimates have reservoir temperature in the range of 138 to 207 °C categorizing it into a low to moderate enthalpy geothermal system. Furthermore, the area has high heat flow values of 53–90 mW/m² because of shallow Moho depth. The prevailing conditions suggest that the geothermal energy can potentially be exploited through an enhanced geothermal system (EGS). The study also indicates different mineral phases that may precipitate out of water during exploitation of geothermal energy and it should be taken into account while designing an EGS for the area.     

Protection of bridge piers against scouring with tetrahedral frames

Armoring countermeasures, such as riprap stones, are the primary method used to protect bridge piers against scouring; however, these methods have not had definitive success. Recently, flow-altering countermeasures, such as sacrificial piles, have been tested as an alternative to armoring countermeasures. This study investigated the mechanics of an innovative flow-altering countermeasure device, frames in the shape of tetrahedrons that act as a pier-scour countermeasure. Results of measured characteristics for turbulence flow showed that the flow around the tetrahedral frames can be divided into three regions： （1） a deceleration region near the sediment bed; （2） an acceleration region in the middle of water depth region; and （3） a restoration region near the water surface. The velocity magnitudes, turbulent intensities and vorticities decreased in the deceleration region, increased in the acceleration region and reverted to that of the unprotected condition in the restoration region. This pier-scour countermeasure is innovative because of its ability to dissipate energy associated with the downflow and the horseshoes vortex generated around the bridge pier. The scour tests revealed that the frames protected the foundation of bridge piers against scour. The experimental results showed that the percentage reduction of scour depth decreased as the velocity ratio, U/U c , decreased, reaching a value of 50% for the range of parameters tested in this study. Moreover, its efficiency was dependent on the placement density of the frames. The data showed that the frames were more effective when η was larger. However, their influence becomes less significant when η≥ 0.16.     

Analysis of vertical crustal movements in the period of the Kaliningrad earthquake of September 21, 2004 (from sea level data)

The paper analyzes data of leveling and meteorological observations conducted in the Kaliningrad region in the second half of September 2004, i.e., during a period including the few moderate seismic shocks of September 21, 2004. The analysis of long observation series and comparison of sea level variations recorded from September 15 through 30, 2004, with meteorological data have led to the conclusion that, most probably, the Sambiiskii Peninsula subsided tectonically by 25–30 cm over 12–24 h and a new sequence of seismic shocks occurred five to eight hours after the beginning of the subsidence. The geodynamic and prognostic aspects of the results obtained in this work are discussed.     

On the behaviour of the hydrogen Lyman series in flares

The Lyman spectrum of hydrogen has been computed for a number of flare models, characterized by the column density of hydrogen atoms in the ground state (N ₁), the electron density (n _e) and the electron temperature (T _e). Broadening by the thermal Doppler effect and by Stark effect has been accounted for. The source functions for the individual lines of the series have been derived from non-LTE calculations of the excitation in hydrogen flares. The aim of the investigation is to evaluate the use of the intensities in between two successive Lyman lines for a determination of the value for N ₁, which is a physical parameter of the flare for which only indirect determinations are available. Whilst in principle this method could give reliable results, its practical application meets with difficulties which hardly can be overcome. Therefore, one probably has to base the N ₁ determination on the highest line resolvable in the spectrum.     

Hydrodynamic Tidal Model of the Persian Gulf Based on Spatially Variable Bed Friction Coefficient

The aim of this study is to develop a two-dimensional hydrodynamic tidal model for the Persian Gulf (PG2017) using 2D-MIKE21 software. The advantages of present study is accounting for the spatial variation of bed friction coefficient besides a precise bathymetry together with a 23-year of combined records of satellite altimetry data. We found that the bed friction coefficient has a significant effect on sea level changes in the region under our modeling consideration. Since the tidal behavior in the northern part of the Qeshm Island is significantly different from the other parts of the Persian Gulf, to present a more accurate hydrodynamic tidal model, the Gulf is divided into two regions where the bed friction coefficient is modeled separately for each region. The root mean square value of the differences between the amplitude of dominant constituents; M2, S2, K1, and O1 derived from the PG2017 model and that of 98 altimetry and coastal tide gauge stations are respectively equal to 1.6, 1.9, 2.8, and 1.3?cm. Moreover, comparing the PG2017 model efficiency with the FES2014, OSU12, EOT11a, DTU10, and Admiralty models shows that the PG2017 model has an improvement of 22.1%, 47.2%, 43.2%, 44.2%, and 57.6% in terms of relative error, respectively.     

NAO–ocean circulation interactions in a coupled general circulation model

The interplay between the North Atlantic Oscillation (NAO) and the large scale ocean circulation is inspected in a twentieth century simulation conducted with a state-of-the-art coupled general circulation model. Significant lead–lag covariance between oceanic and tropospheric variables suggests that the system supports a damped oscillatory mode involving an active ocean–atmosphere coupling, with a typical NAO-like space structure and a 5 years timescale, qualitatively consistent with a mid-latitude delayed oscillator paradigm. The two essential processes governing the oscillation are (1) a negative feedback between ocean gyre circulation and the high latitude SST meridional gradient and (2) a positive feedback between SST and the NAO. The atmospheric NAO pattern appears to have a weaker projection on the ocean meridional overturning, compared to the gyre circulation, which leads to a secondary role for the thermohaline circulation in driving the meridional heat transport, and thus the oscillatory mode.     

Using idealized snow forcing to test teleconnections with the Indian summer monsoon in the Hadley Centre GCM

Anomalous heavy snow during winter or spring has long been regarded as a possible precursor of deficient Indian monsoon rainfall during the subsequent summer. However previous work in this field is inconclusive, in terms of the mechanism that communicates snow anomalies to the monsoon summer, and even the region from which snow has the most impact. In this study we explore these issues in coupled and atmosphere-only versions of the Hadley Centre model. A 1050-year control integration of the HadCM3 coupled model, which well represents the seasonal cycle of snow cover over the Eurasian continent, is analysed and shows evidence for weakened monsoons being preceded by strong snow forcing (in the absence of ENSO) over either the Himalaya/Tibetan Plateau or north/west Eurasia regions. However, empirical orthogonal function (EOF) analysis of springtime interannual variability in snow depth shows the leading mode to have opposite signs between these two regions, suggesting that competing mechanisms may be possible. To determine the dominant region, ensemble integrations are carried out using HadAM3, the atmospheric component of HadCM3, and a variety of anomalous snow forcing initial conditions obtained from the control integration of the coupled model. Forcings are applied during spring in separate experiments over the Himalaya/Tibetan Plateau and north/west Eurasia regions, in conjunction with climatological SSTs in order to avoid the direct effects of ENSO. With the aid of idealized forcing conditions in sensitivity tests, we demonstrate that forcing from the Himalaya region is dominant in this model via a Blanford-type mechanism involving reduced surface sensible heat and longwave fluxes, reduced heating of the troposphere over the Tibetan Plateau and consequently a reduced meridional tropospheric temperature gradient which weakens the monsoon during early summer. Snow albedo is shown to be key to the mechanism, explaining around 50% of the perturbation in sensible heating over the Tibetan Plateau, and accounting for the majority of cooling through the troposphere.     

Kriging of water levels in the Souss aquifer,Morocco

Universal kriging is applied to water table data from the Souss aquifer in central Morocco. The procedure accounts for the spatial variability of the phenomenon to be mapped. With the use of measured elevations of the water table, an experimental variogram is constructed that characterizes the spatial variability of the measured water levels. Spherical and Gaussian variogram models are alternatively used to fit the experimental variogram. The models are used to develop contour maps of water table elevations and corresponding estimation variances. The estimation variances express the reliability of the kriged water table elevation maps. Universal kriging also provides a contour map of the expected elevation of the water table (drift). The differences between the expected and measured water table elevations are called residuals from the drift. Residuals from the drift are compared with residuals obtained by more traditional least-squares analysis.     

Simulation Of Salt-Water Encroachment In A Multi-Layer Groundwater System,Bangkok, Thailand

Salt-water encroachment in the multi-layer groundwater system underlying the Bangkok metropolitan area was simulated with a quasi-three-dimensional flow and solute-transport model. The quasi-three-dimensional model used in this study is based on the model SUTRA. Accurate conceptualization of the initial state of the system with regard to the distribution of salt-water concentration is very important for modeling, especially in areas where localized zones of high salt concentration exist in the groundwater. Data adequacy and model results were evaluated by a geostatistical analysis. The model is capable of simulating the regional trend of potentiometric levels and salt concentration. However, lack of monitoring data in areas where localized zones of high salt concentration exist resulted in large model residuals. RÉSUMÉ: L'empiétement des eaux salées dans le système hydrologique multi-couche sous-jacent la zone métropolitaine de Bangkok a été simulé à l'aide d'un modèle quasi-tridimensionnel représentant l'écoulement des eaux et le transport d'éléments en solution. Le modèle quasi-tridimensionnel utilisé dans cette étude est basé sur le modèle SUTRA. Une conceptualisation exacte de l'état initial du système en ce qui concerne la répartition de la concentration des eaux salines est très important, particulièrement dans les endroits localisés où l'eau souterraine presente une forte concentration en sel. La qualité des donnés et des résultats a été estimée à l'aide d'une analyse géostatistique. Le modèle est capable de simuler la tendance régionale des niveaux potentiométriques et de la concentration en sel. Cependant, le manque de données de contrôle dans les endroits à forte concentration a donné lieu à des résiduels importants. RESUMEN: La intrusión de agua salina en el sistema multicapa bajo el área metropolitana de Bangkok se simuló mediante un modelo de flujo y transporte de solutos casi-tridimensional, basado en el modelo SUTRA. La conceptualizacián precisa de la distribución inicial de concentraciones de agua salina es muy importante para el modelo, especialmente en áreas donde existen zonas locales de alta concentración salina en el agua subterránea. La exactitud de los datos y del modelo se evaluaron mediante un análisis geoestadístico. El modelo permite simular la tendencia regional de los niveles piezométricos y la concentración de sales. Sin embargo, la falta de datos de muestreo en las zonas locales de alta salinidad resultaron en valores altos de los residuos calculados por el modelo.