Atmospheric Artifact Compensation in Ground-Based DInSAR Applications

In this letter, a coherence-based technique for atmospheric artifact removal in ground-based (GB) zero-baseline synthetic aperture radar (SAR) acquisitions is proposed. For this purpose, polarimetric measurements acquired using the GB-SAR sensor developed at the Universitat Politecnica de Catalunya are employed. The heterogeneous environment of Collserola Park in the outskirts of Barcelona, Spain, was selected as the test area. Data sets were acquired at X-band during one week in June 2005. The effects of the atmosphere variations between successive zero-baseline SAR polarimetric acquisitions are treated here in detail. The need to compensate for the resulting phase-difference errors when retrieving interferometric information is put forward. A compensation technique is then proposed and evaluated using the control points placed inside the observed scene.     

A Microwave Tomographic Approach for Nondestructive Testing of Dielectric Coated Metallic Surfaces

A microwave imaging method for nondestructive testing of perfectly conducting surfaces beyond a layered media is presented. The method is an adaptation of the surface reconstruction approach by Yapar et al. to the present problem. It is based on the analytical continuation of the measured data to the surface under test through a special representation of the scattered field in terms of Fourier transform and Taylor expansion. Then the problem is reduced to the solution of a nonlinear equation which is solved iteratively via the Newton method and regularization in the least squares sense. Numerical simulations show that defects as small as lambda/500 can be recovered through the presented algorithm.     

Contextual Spatiospectral Postreconstruction of Cloud-Contaminated Images

A general method has been proposed recently for the contextual reconstruction of cloud-contaminated areas in multitemporal multispectral images. It is based on the idea of making the prediction process learn from information available in the cloud-free neighborhood of contaminated areas. Though promising, this method does not fully exploit all available information, thus leaving room for further methodological enhancements. This letter presents a postreconstruction methodology for improving the contextual reconstruction process by opportunely capturing spatial and spectral correlations characterizing the considered image. In addition, we propose a solution to a problem that has not yet been addressed in the remote sensing literature, i.e., the generation of an error map beside the reconstructed images to provide end-users with helpful indications about reconstruction reliability. Thorough experiments conducted on a multitemporal sequence of Landsat-7 ETM+ images are reported and discussed.     

Effect of Look Angle on the Accuracy Performance of Fixed-Baseline Interferometric SAR

The effect of look angle on the accuracy performance of fixed-baseline interferometric synthetic aperture radar is studied. It is shown that there exists an optimal look angle that minimizes the variance of the surface height estimate for a resolution cell, and it depends upon the system as well as surface parameters. Numerical analysis confirming the existence of the optimal look angle is presented     

Unsupervised Change Detection From Multichannel SAR Images

Multichannel synthetic aperture radar (SAR) data present a good potential for environmental monitoring and disaster management, owing both to their insensitivity to atmospheric and sun-illumination conditions, and to the improved discrimination capability they may provide as compared to single-channel SAR. However, this requires accurate and possibly automatic techniques to generate change maps from multichannel SAR images acquired from the same geographic area at different times. In this letter, an automatic unsupervised contextual change-detection method is proposed for two-date multichannel SAR images, by integrating a SAR-specific extension of the Fisher transform with a variant of the expectation-maximization algorithm and with Markov random fields. The method is validated by experiments on SIR-C/XSAR data     

Comparison of Deep Underwater Measurements and Radar Observations of Rainfall

Deep-water acoustical measurements of rainfall are compared to high-resolution ground radar observations for the first time. The measurements of underwater ambient sound were made from a subsurface mooring near Methoni, Greece, in 2004. The acoustical measurements were at 60-, 200-, 1000-, and 2000-m depths. Simultaneous ground-based polarimetric -band radar observations were made over the acoustic mooring. Comparisons show acoustic detection of rain events and storm structure that are in agreement with the radar observations. Results from a comparison between the underwater sound pressure level at different depths and the observed radar reflectivities are presented.     

High-Resolution Forecast Models of Water Vapor Over Mountains: Comparison With MERIS and Meteosat Data

Propagation delay due to variable tropospheric water vapor (WV) is one of the most intractable problems for radar interferometry, particularly over mountains. The WV field can be simulated by an atmospheric model, and the difference between the two fields is used to correct the radar interferogram. Here, we report our use of the U.K. Met Office Unified Model in a nested mode to produce high-resolution forecast fields for the 3-km-high Mount Etna volcano. The simulated precipitable-water field is validated against that retrieved from the Medium-Resolution Imaging Spectrometer (MERIS) radiometer on the Envisat satellite, which has a resolution of 300 m. Two case studies, one from winter (November 24, 2004) and one from summer (June 25, 2005), show that the mismatch between the model and the MERIS fields ( rms = 1.1 and 1.6 mm, respectively) is small. One of the main potential sources of error in the models is the timing of the WV field simulation. We show that long-wavelength upper tropospheric troughs of low WV could be identified in both the model output and Meteosat WV imagery for the November 24, 2004 case and used to choose the best time of model output.     

Testing satellite and ground thermal imaging of low-temperature fumarolic fields: The dormant Nisyros Volcano (Greece)

The Nisyros Volcano (Greece) was monitored by satellite and ground thermal imaging during the period 2000–2002. Three night-scheduled Landsat-7 ETM⁺ thermal (band 6) images of Nisyros Island were processed to obtain land surface temperature. Ground temperature data were also collected during one of the satellite overpasses. Processed results involving orthorectification and 3-D atmospheric correction clearly show the existence of a thermal anomaly inside the Nisyros Caldera. This anomaly is associated mainly with the largest hydrothermal craters and has land surface temperatures 5–10 °C warmer than its surroundings. The ground temperature generally increased by about 4 °C inside the main crater over the period 2000–2002. Ground thermal images of the hydrothermal Stephanos Crater were also collected in 2002 using a portable thermal infrared camera. These images were calibrated to ground temperature data and orthorectified. A difference of about 0–2 °C was observed between the ground thermal images and the ground temperature data. The overall study demonstrates that satellite remote sensing of low-temperature fumarolic fields within calderas can provide a reliable long-term monitoring tool of dormant volcanoes that have the potential to reactivate. Similarly, a portable thermo-imager can easily be deployed for real-time monitoring using telemetric data transfer. The operational costs for both systems are relatively low for an early warning system.     

Modeling long-period noise in kinematic GPS applications

We develop and test an algorithm for modeling and removing elevation error in kinematic GPS trajectories in the context of a kinematic GPS survey of the salar de Uyuni, Bolivia. Noise in the kinematic trajectory ranges over 15 cm and is highly autocorrelated, resulting in significant contamination of the topographic signal. We solve for a noise model using crossover differences at trajectory intersections as constraints in a least-squares inversion. Validation of the model using multiple realizations of synthetic/simulated noise shows an average decrease in root-mean-square-error (RMSE) by a factor of four. Applying the model to data from the salar de Uyuni survey, we find that crossover differences drop by a factor of eight (from an RMSE of 5.6 to 0.7 cm), and previously obscured topographic features are revealed in a plan view of the corrected trajectory. We believe that this algorithm can be successfully adapted to other survey methods that employ kinematic GPS for positioning.