On the enhanced confining pressure aproach to the mechanics of reinforced soil

Summary A review is presented of conceptual approaches that are currently in use for interpreting the operation of reinforced soil. The concepts of enhanced confining pressure and of reduced normal tensile strains are found to be closely related to current experimental and theoretical investigations as well as to the design methodologies available at present for reinforced soil applications. Focusing on the enhanced confining pressure concept, analytical expressions are developed that allow the estimation of the value of equivalent confining stress increase when the properties of soil and reinforcement and the state of stresses acting on a cylindrical reinforced soil element are known. The derived expressions can also be utilized for estimating the soil-reinforcement friction angle from the results of triaxial tests on cylindrical samples reinforced with horizontal layers of reinforcement.     

On the causes of 18O-depletion and 18O/16O homogenization during regional metamorphism; the East Humboldt Range core complex,Nevada

 Previous stable isotope studies at Lizzies Basin revealed that metasedimentary rocks are ¹⁸O-depleted relative to protolith values, particularly in the lower parts of the section (Lower Zone) where the rocks are also isotopically homogeneous on a scale of hundreds of meters (quartz δ¹⁸O=+9.0 to +9.6 per mil). In contrast, metasedimentary rocks at higher levels at Lizzies Basin (Upper Zone) are less ¹⁸O-depleted and more heterogeneous in δ¹⁸O. In order to understand more fully the isotopic evolution of this terrane, a series of detailed, meter-scale traverses across various metamorphic and igneous lithologies were completed at Lizzies Basin, and at the structurally higher Angel Lake locality. Traverses in the Lizzies Basin Lower Zone and in the lower parts of Angel Lake (Angel Lake Lower Sequence) across various silicate lithologies, including abundant granitoids, reveal similar degrees of homogeneity, although the average δ¹⁸O values are higher at Angel Lake. In contrast, traverses which include substantial thicknesses of marble and calc-silicate gneiss and very little granitoid have more heterogeneous quartz δ¹⁸O values (+11.9 to +13.4 per mil), and also have a higher average δ¹⁸O (+12.9 per mil), than observed elsewhere. The scale of ¹⁸O/¹⁶O homogeneity in quartz observed at Lizzies Basin and Angel Lake (meters to hundreds of meters) requires fluid-mediated isotope exchange, which accompanied Tertiary metamorphism. There is a correlation between the degree of ¹⁸O-depletion in metasedimentary rocks, ¹⁸O/¹⁶O homogenization between lithologies, and the proportion of granitoids (leucogranites in particular) within any part of the section, and a corresponding anticorrelation with the proportion of marble. This points to a causal relationship, whereby the leucogranites (as well as the Tertiary hornblende diorite and biotite monzogranite) acted as both a relatively low-¹⁸O reservoir and a source of fluids to enhance exchange, while the marbles hindered isotope depletion and homogenization by acting as relatively high-¹⁸O reservoirs and impermeable layers. Material balance calculations help delineate the plausible mechanisms of exchange between granitoids and metasediments. Single-pass infiltration of magmatic fluids from the granitoids is not capable of reproducing all of the observations. Fluid-mediated exchange by convective recirculation of magmatic fluids on a scale of meters is the mechanism which explains all of the observations. The generalized model for the isotopic evolution of the East Humboldt Range core complex provides an excellent opportunity to establish the main causes and controlling factors of ¹⁸O-depletion and ¹⁸O/¹⁶O homogenization during regional metamorphism. Received: 27 July 1993 / Accepted: 1 July 1994     

Quantitative analysis of calcite and Mg-calcite by X-ray diffraction: effect of grinding on peak height and peak area

Mineralogical analysis of calcite and Mg-calcite by X-ray diffraction requires that the samples be ground to a powder. Such grinding determines the particle size of the powder and the structural damage of the minerals. Both of these in turn affect the peak intensities recorded by the X-ray machine. Most carbonate sediments are inhomogeneous; they contain both calcite and Mg-calcite which are affected differently by grinding. Such differences cause quantitative analytical results to be inconsistent with the true mineralogical abundance. The two acceptable methods of analysis—(1) measurement of peak height from the base and (2) measurement of the area under the peak—were compared to determine if sample preparation affects the quantitative results. In samples with variable and relatively small amounts of calcite and Mg-calcite the measurement of peak height yields more reproducible results than does the measurement of peak areas. Different proportions of particle size of the mineralogical components in a sample powder, affect proportionally more the peak areas than the peak heights. Extensive grinding causes structural damage of the component minerals which affects much more the peak areas than the peak heights. Thus for quantitative analyses of calcite and Mg-calcite in inhomogeneous carbonate samples which require differing grinding times and have greatly variable amounts of calcite and Mg-calcite, the peak height measurement seems to be a better method than peak area measurement.     

Characterization of Quaternary faults by electric resistivity tomography in the Andean Precordillera of Western Argentina

El río San Juan, situado en la Provincia de San Juan (Argentina) cruza la Precordillera y otras unidades geológicas incluyendo la Depresión de Ullum y la Zona de La Laja, entre las latitudes 31°S y 32°S. El curso del río tiene un cierto caracter antecedente como puede deducirse por sus dos trazas perpendiculares unidas por otra casi paralela a las alineaciones estructurales principales. En la zona de la Precordillera, el valle del río San Juan muestra numerosos abanicos aluviales, situados en las zonas de confluencia entre el río principal y sus tributarios. Las superficies de los abanicos aluviales cuaternarios estan cortadas por una serie de escalones que consideramos como terrazas aluviales generadas por episodios repetitivos de agradación y degradación. El sector estudiado incluye una zona con una importante actividad sísmica reciente(La Laja), otra sin una importante actividad sísmica reciente (Precordillera), y una zona subsidente (Ullum) donde se formó un gran lago natural hace unos 6500 años. El antiguo río San Juan fue capturado por el valle de la Quebrada de Ullum mediante una incisión del orden de 25 m, que implicó una nueva adecuación del gradiente del río mediante los efectos de la erosión remontante. El gradiente del río San Juan muestra algunas irregularidades que, aunque no se presenten relacionadas directamente con las estructuras principales, estan relacionadas con la propia dinámica fluvial que acentúa la diferenciación litológica. La anchura del valle del río principal, la geometria y el gradiente de cada tributario, junto a las litologias del basamento y a las dimensiones de cada area fuente local, son los factores principales que controlan los procesos de la generación de las terrazas aluviales. En la zona de La Laja, donde la terraza mas alta soporta un nivel de travertino, la datación de los depósitos travertínicos proporciona datos como para suponer una tasa de incisión del orden de 0,9–1 mm/año, asociada a la actuación periódica de la falla de La Laja.

Ionosphere Disturbances Preceding Earthquakes according to the Data of Ground Based Station of the Vertical Ionospheric Sounding Wakkanai

The paper analyzes the data of manual ionograms processing of hourly measurements of the critical frequency foF2 of the F2 ionospheric layer at the Wakkanai ionospheric vertical sounding station (Japan) in a geomagnetically quiet environment before a series of earthquakes with magnitude M > 6.0, for which the station entered the earthquake preparation zone, in order to detect possible Ionospheric Disturbances Preceding Earthquakes (IDPE), and to determine their quantitative characteristics. Detected IDPE, in the opinion of the authors, can be related to the processes of preparation of the corresponding earthquakes, i.e., to be Ionospheric Precursors of Earthquakes (IPE).     

Crustal structure beneath Spain from deep seismic sounding experiments

Major tectonic units of Spain have been investigated by deep seismic sounding experiments since 1974 to determine crustal structures and to delineate their differences. These areas are the central part of the Hercynian Meseta, and the Alpine chains: the Betic Cordillera in the south, including the Balearic promontory and the Alboran Sea, and the Pyrenees in the north.The main features of the crust and the upper mantle along a NNE-SSW cross-section from the Pyrenees to the Alboran Sea are described.The crust under the Meseta is typical of Hercynian areas found elsewhere in Europe, with an average thickness of 31 km, whereas the two Alpine regions are characterized by very large lateral inhomogeneities, such as rapid thickening of the crust to 50 and 40 km under the Pyrenees and the Betics, respectively. The deep-reaching E-W-trending North Pyrenean fault has a throw of 10–15 km at the base of the crust. A P_n velocity of 8.1 km s^?1 is found under the entire Iberian Peninsula.In the Alboran Sea, strongly varying thicknesses of sediments, shallow variable depths to the Moho (～ 13 km under the Alboran ridge), and strong variations of P_n velocity between 7.5 and 8.2 km s^?1 have been found.     

Constructing the Optimal Model of the Geoelectric Section Using Vertical Electrical Sounding Data: Case Study of the Central Part of the Garm Research Area

Izvestiya, Atmospheric and Oceanic Physics - In geophysical studies, particularly when searching for precursors of earthquakes, there are problems of investigating the geoelectric structure of the...     

Block removal and step backwearing as erosion processes on rock shore platforms: a preliminary case study of the chalk shore platforms of south‐east England

Shore platforms frequently exhibit steps or risers facing seaward, landwards or obliquely across‐shore. A combination of soft copy photogrammetry, ortho‐rectification, geo referencing and field measurement of step height are linked in a GIS environment to measure step retreat on chalk shore platforms at sample sites in the south of England over two periods, 1973–2001, 2001–2007. The methods used allow for the identification, delineation and measurement of historic change at high spatial resolution. The results suggest that while erosion of chalk shore platforms by step backwearing is highly variable, it appears to be of similar magnitude to surface downwearing of the same platforms measured by micro‐erosion meters (MEMs) and laser scanning, in a range equivalent to 0·0006 – 0·0050 m y^?1 of surface downwearing. This equates to annual chalk volume loss from the platforms, by the two erosion processes combined, of between 0·0012 m³ m^?2 and 0·0100 m³ m^?2. Results from the more recent years' data suggests that step retreat has variability in both space and time which does not relate solely to climatic variability. The results must be viewed with caution until much larger numbers of measurements have been made of both downwearing and step erosion at higher spatial and temporal resolution. Copyright © 2010 John Wiley & Sons, Ltd.