Observed foundation behaviour of concrete gravity platforms installed in the North Sea 1973–1978

Available measurements of foundation behaviour of the 13 concrete gravity platforms installed in the North Sea in the years 1973–1978 are presented. The measurements cover both the installation phase and the early part of the operation period. For the installation phase, measurements of dowel and skirt penetration resistance, base contact stresses, tilt, piping and erosion, are presented. For the operation period, the presentation includes measurements of settlements, pore water pressures, base contact stresses, permanent lateral displacements, cyclic displacements, dynamic behaviour and erosion. The measurements are used to back calculate soil properties and to evaluate the adequacy of the design procedures which have been used. The observations give valuable experience with respect to the foundation performance of offshore gravity platforms.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.     

Trichodesmium erythraeum (Ehrenberg) bloom along the southwest coast of India (Arabian Sea) and its impact on trace metal concentrations in seawater

The incidence of a large scale Trichodesmium erythraeum bloom along the southwest coast of India (Arabian Sea) observed in May 2005 is reported. Around 4802 filaments of T. erythraeum ml⁻¹ seawater was observed and a colony consisted of 3.6 × 10⁵ cells. The bloom was predominant off Suratkal (12° 59′N and 74° 31′E) with a depth of about 47 m, covering an area of 7 km in length and 2 km width. The concentrations of Zinc, Cadmium, Lead, Copper, Nickel and Cobalt were determined in samples collected from the bloom and non-bloom sites using stripping voltammetry. The observed hydrographical and meteorological parameters were found to be favorable for the bloom. The concentrations of Zinc, Cadmium and Nickel were found to be higher at bloom stations, while the concentrations of Lead, Copper and Cobalt were found to be very low at bloom stations. Elevated concentrations of Cadmium and Cobalt were observed at Valappad mainly due to the decomposition of detrital material produced in the bloom. Statistically significant differences (P > 0.01) in metal concentrations between the bloom and non-bloom stations were not observed except for Copper. Metals such as Lead, Copper and Cobalt were removed from the seawater at all places where bloom was observed. Cadmium was found to be slowly released during the decaying process of the bloom.     

Organic matter origin and distribution in suspended particulate materials and surficial sediments from the western Adriatic Sea (Italy)

In this study, organic carbon (OC), total nitrogen (TN), stable carbon isotopic (δ¹³C_OC) and CuO reaction product compositions were used to identify the sources of organic matter (OM) and to quantify the relative importance of allochthonous and autochthonous contributions to the western Adriatic Sea, Italy. Suspended particulate material (195 samples) and surficial sediments (0–1 cm, 70 samples) from shallow cross-shelf transects were collected in February and May 2003, respectively. Vertical water column profiles were acquired along the same transects. Data include depth, potential temperature, salinity, density and chlorophyll fluorimetry.Along the western Adriatic shelf in the near-shore region, the phytoplankton growth was influenced by dynamics of the buoyant plumes from the Po and Appennine rivers. A small amount of very fine terrigenous material remained suspended within the coastal current and was exported southward along the shelf to the slope. High variability in the bulk composition was detected in the Po prodelta surficial sediments, whereas the western Adriatic shelf, although a larger area, exhibited a narrower range of values.A significant decoupling was observed between suspended particles in the water column and surficial deposits. The organic material collected in the water column was compositionally heterogeneous, with contributions from marine phytoplankton, riverine–estuarine phytoplankton and soil-derived OM. Frequent physical reworking of surficial sediments likely leads to the efficient oxidation of marine OC, resulting in the observed accumulation and preservation of refractory soil-derived OC delivered by the Po and Appennine rivers.     

Nannoplankton of the Atlantic Ocean from sediment trap samples

Calcareous nannoplankton from sediment trap samples collected at six sites in the Atlantic Ocean from 23° S to 73° N (cruise 20 of R/V Vityaz’ and cruise 33 and 34 of R/V Akademik Mstislav Keldysh). Those samples were studied with a scanning electron microscope. In the coastal and open-sea regions of the North and South Atlantic and in the subarctic region of the Norwegian Sea, the conditions are significantly different. In the shelf area of the Benguela upwelling, 11 species were recognized; some of them were agglutinated by diatoms and tintinnides or covered the surface of pellets. The Broken Spur and TAG pelagic areas of the North Atlantic contained up to 43 coccolith species. They included holococcoliths, large pelagic, and delicate easily soluble species distributed over the entire water column. The presence of coccoliths in the high-latitude area of the Norwegian Sea is related to their supply with the warmer North Atlantic waters. These assemblages are distinguished by a low species diversity and an enhancement of the coccolith solubility with the depth increase.     

Combined numerical model of currents, waves, and sediment transport in Lake Donuzlav

We present a numerical model of the dynamics of Lake Donuzlav, which enables one to perform simultaneous numerical analyses of the currents, sea level, waves, and sediment transport. The model is based on the hydrodynamic block and the spectral wave model. For typical storm situations, we study the specific features of the integral circulation of waters and the three-dimensional structure of currents, investigate the wind-induced wave fields, and evaluate the flows of sediments and deformations of the bottom. The presence of intense eddy structures is revealed in the field of currents caused by the bottom topography. A significant intensification of waves in the south part of the lake is established in the case of penetration of storm waves through the strait. It is shown that the account of waves leads to qualitative changes in the structure of circulation in the lake and to the formation of well-pronounced areas of wave-induced elevations and lowerings of the sea level. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 2, pp. 43–65, March–April, 2006.     

First results from the North Iceland experiment

Between June 2004 and September 2004 a temporary seismic network was installed on the northern insular shelf of Iceland and onshore in north Iceland. The seismic setup aimed at resolving the subsurface structure and, thus, the geodynamical transition from Icelandic crust to typical oceanic crust along Kolbeinsey Ridge. The experiment recorded about 1,000 earthquakes. The region encloses the Tjörnes Fracture Zone containing the Husavik–Flatey strike-slip fault and the extensional seismic Grimsey Lineament. Most of the seismicity occurs in swarms offshore. Preliminary results reveal typical mid-ocean crust north of Grimsey and a heterogeneous structure with major velocity anomalies along the seismic lineaments and north–south trending subsurface features. Complementary bathymetric mapping highlight numerous extrusion features along the Grimsey Lineament and Kolbeinsey Ridge. The seismic dataset promises to deliver new insights into the tectonic framework for earthquakes in an extensional transform zone along the global mid-ocean ridge system.     

Feature modeling approach to simulating Loop Current Frontal Eddies

Loop Current Frontal Eddies (LCFE) in the Gulf of Mexico are simulated with a regional configuration of the Princeton Ocean Model using a feature-oriented initialization technique. The initialization procedure is based on a prior investigation of stability characteristics of the Loop Current (LC). Zonal channel experiments conducted with a multi-layer intermediate equations model allowed to identify conditions necessary for formation and growth of frontal eddies. The simulations were able to reproduce key features of LCFE-topography interaction in the DeSoto Canyon region observed during the “Eddy Intrusion” study.     

Drag Coefficient,Dynamic Roughness and Reference Wind Speed

Surface waves are the roughness element of the ocean surface. The parameterization of the drag coefficient of the ocean surface is simplified by referencing to wind speed at an elevation proportional to the characteristic wavelength. The dynamic roughness is analytically related to the drag coefficient. Under the assumption of fetch limited wave growth condition, various empirical functions of the dynamic roughness can be converted to equivalent expressions for comparison. For datasets covering a wide range of the dimensionless frequency (inverse wave age), it is important to account for the variable rate of wave development at different wave ages. As a result, the dependence of the Charnock parameter on wave age is nonmonotonic. Finally, the analysis presented here suggests that the significant wave steepness is a sensitive property of the ocean surface and a single variable normalization of the dynamic roughness using a wavelength or wave height parameter actually produces more robust functions than bi-variable normalizations using wave height and wave slope.