Zircon U-Pb ages and Hf isotopic characteristics of the Dehe biotite monzonitic gneiss pluton in the North Qinling orogen and their geological significance

The Dehe granitic pluton intruded the Xiahe Group which is in the core complex of the North Qinling Orogenic Belt(NQOB).It shows gneissic bedding and possesses typical S-type granite minerals such as muscovite and garnet.LA-ICP-MS U-Pb isotopic dating of the Dehe granite yielded a weighted average age of 925±23 Ma which represents the emplacement age of the pluton.Most of the εHf(t) values are negative,and the two-stage model ages are consistent with the age of the Qinling Group.The isotope data show that the Dehe granite was formed in the following geological setting:in the syn-collision setting of the NQOB in the Neoproterozoic,crustal thickening induced partial melting of materials derived from the Qinling complex,and then the maga upwelled and intruded into the Xiahe Group.The formation of the Dehe S-type granite implied the occurrence of a convergent event in the QOB during the Neoproterozoic.     

Saddle-shaped reticulate <Emphasis Type="Italic">Nummulites</Emphasis> from Early Oligocene rocks of Khari area,SW Kutch,India

Saddle-shaped reticulate Nummulites from the Early Oligocene rocks of Khari area, SW Kutch, India is reported here for the first time. Unusual shape of this Nummulites is due to the curved nature of the coiling plane, indicating space constrained postembryonic test growth. With regular development of chambers, septa and septal filaments, the saddle-shaped Nummulites constitutes the third morphotype of N. cf. fichteli Michelotti form A. Other morphotypes of the species reported earlier include inflated lenticular and conical tests. Multiple morphotypes of N. cf. fichteli form A indicates varied test growth in response to substrate conditions. Morphological variability exhibited by N. cf. fichteli form A from Kutch and some Early Oligocene reticulate Nummulites from the Far East are comparable. This faunal suite is morphologically distinct from the contemporary reticulate Nummulites of the European localities.     

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.     

Thermal and isotopic profiling of the Pipeline hydrothermal system: Application to exploration for Carlin-type gold deposits

New exploration techniques are vital to the search for new orebodies in mature terranes, as well as for extensions of existing orebodies. This research focused on application of low-temperature dating techniques (primarily apatite fission-tracks) and stable isotope measurements (carbon and oxygen in carbonate rocks) in and around the Pipeline deposit, a Carlin-type gold system. The primary purpose of the project was to assess whether these techniques could provide exploration vectors that might be used in conjunction with other geologic, geochemical, and geophysical techniques to determine the locus of fossil hydrothermal fluid flow, and the attendant possibility of finding economic mineral deposits.At Pipeline, measurements of apatite fission-tracks and (U − Th) / He geochronometry yield a clear indication of the elevated temperatures associated with the fossil hydrothermal system. The pattern is one of a central target (Pipeline deposit) with decreasing thermal effects as far as several kilometers laterally from the known ore zone. Because of the irregular nature of fluid flow through fractures, a significant number of samples are required to discern this pattern, but the pattern is quite clear from the 32 samples in and around the Pipeline pit.Stable isotope measurements of carbonate rocks yield patterns centered on the Pipeline pit area. Oxygen isotopes in particular are shifted toward lower values as the result of interaction between the hydrothermal fluids and carbonate rocks. Carbon isotopes show a pattern, but it is somewhat more difficult to interpret than the oxygen isotope pattern. As with the geochronometric patterns, isotopic indications of fluid flow are present several kilometers from the ore zone at Pipeline. Also as with the geochronometric data, a relatively large sample set is required to see the pattern. At Pipeline, the patterns are evident in approximately 45 surface samples and very clearly in the cross-sections containing approximately 100 samples.From these data, it is clear that thermal and stable isotopic measurements on rocks at a significant distance from the known Pipeline hydrothermal system record the passage of hot fluids through the rock. Both techniques provide a footprint of the Pipeline system that is several diameters larger than the ore zone (as presently known). Therefore, thermochronologic and stable isotopic measurements can be utilized in conjunction with other techniques as part of an overall exploration strategy for Carlin-type deposits. Although these techniques do not provide a direct indication of the metal content of the fossil hydrothermal fluids, they do provide an indication of the robustness of fluid flow and the potential size of a hydrothermal system.     

Landfill site selection using combination of fuzzy logic and multi-attribute decision-making approach

During the last decades, growth of urbanization and industrialization led to an increase in solid waste generation. Landfilling is the most prevalent ultimate disposal method for the municipal solid wastes in developing countries. The rapid municipal solid waste generation in Markazi province (central part of Iran) causes the need for precision in finding a suitable landfill site selection. In the present study, 12 factors (environmental and socioeconomic factors) have been applied to select the landfill site in Markazi province, Iran. The different methods including the analytic network process (ANP) combined with fuzzy linguistic quantifier, ordered weighted average (OWA), and weighted linear combination (WLC) approach in geographic information system was applied to find an appropriate landfill site. The OWA operator function permits the evaluation of the wide spectrum of consequences (with different scenario) obtained from different management strategies. Results revealed that integration of fuzzy logic, ANP, and OWA provides flexible and better ideas compared to the Boolean logic and WLC to select a suitable landfill site.     

Pathways of clay mineral transport in the coastal zone of the Brazilian continental shelf from Ceará to the mouth of the Amazon River

The transport pathways of fine sediments (fraction <2 μm) along the Brazilian continental shelf from Ceará to the Amazon River mouth were studied by means of clay mineral analyses. On the continental shelf southeast of the Amazon mouth, fluctuations in clay mineral compositions reflect simple mixing between the suspended load of the North Brazil Current and sediment from several smaller rivers. Previously, clay mineral variations west of the Amazon mouth have been explained by variable settling velocities of different grain-size classes within the <2 μm fraction or by selective coagulation of individual clay mineral groups. By contrast, our experiments with river bank samples show that selective coagulation does not occur in Amazon River sediments. A more appropriate explanation for observed variations in clay mineral composition off the Amazon mouth seems to be, similarly to that for the shelf between Ceará and the Amazon mouth, a mixing of Amazon sediments with suspended material of the North Brazil Current. This interpretation is supported by data on clay mineral composition east and south of the Amazon mouth, showing more affinity to sediments of the North Brazil Current than to the suspended load of the Amazon River. Additionally, relatively low sedimentation rates and low concentrations of fine-grained sediments on the shelf suggest that high riverine input by the Amazon River does not overprint the sediments of the North Brazil Current in this region. The strong North Brazil Current shunts the Amazon suspended load in a north-westerly direction along the north-eastern coast of South America. Hence, stronger sedimentation of Amazon sediments would occur only west of the river mouth.     

The Potential for Environmentally Sound Development of Marine Deposits of Potassic and Phosphatic Minerals Offshore, Southern Africa

Extensive potassium and phosphorous-rich mineralization occurs on the outer continental shelf of the southern and west coasts of South Africa and Nambia. This article reviews the potential of exploiting these deposits in an environmentally sound manner for the manufacture of fertilizer. At present, reserves of potash and phosphate fertilizer are exploited from terresterial deposits, the majority being surface mined. The use of fertilizer in South Africa has shown no growth in the past 13 years, and, in some years, usage has even declined. On average, over the last decade, South Africa has consumed 2 million Mt of fertilizer (including nitrogen) per annum, the vast majority of phosphate fertilizer being produced by FOSKOR from the Phalaborwa Igneous Complex. Potash fertilizer is imported into South Africa. Although fertilizer consumption is expected to decrease in the short-term, there are good future prospects for the domestic and international fertilizer market. Considerable research into both glauconitic (containing K 2 O) and phosphatic deposits along the southern African continental shelf indicate that these sedimentary deposits have a complex genesis and mineralization. Of the total K 2 O reserves of 1300 million Mt on the southern African margin, 1000 million Mt is located off the southern African west coast, and the remainder situated on the Agulhas Bank. The largest glauconite concentration ( ±300 million Mt K 2 O) off southern Africa lies west of Saldanha Bay, South Africa. The distribution of P 2 O 5 off southern Africa is dominated by the vast deposit between Walvis Bay and Luderitz, Nambia. This reserve is estimated to contain 1000 million Mt of greater than 5% P 2 O 5 in a relatively small area of about 10000 km2. The phosphorite deposit south of Saldanha Bay constitutes a reserve of ±3500 million Mt of apatite and the deposit on the Agulhas Bank comprises 5500 million Mt. The phosphate deposit off Saldanha Bay occurs as an extensive, low to medium grade deposit. Although vast resources of potash and phosphatic minerals occur along the southern African outer continental shelf the expensive nature of marine exploitation may render most of these deposits, especially the phosphates, subeconomic. The low price of fertilizer andextensive natureontheonland deposits, although confined to asmallnumber of countries, mean that it will not be financially viable to extract these deposits. Assuming high grade glauconitic sand with the right composition can be located, the high market price indicates good future prospects for these potash deposits.     

The 2dF Galaxy Redshift Survey: luminosity dependence of galaxy clustering

We investigate the dependence of the strength of galaxy clustering on intrinsic luminosity using the Anglo-Australian two degree field galaxy redshift survey (2dFGRS). The 2dFGRS is over an order of magnitude larger than previous redshift surveys used to address this issue. We measure the projected two-point correlation function of galaxies in a series of volume-limited samples. The projected correlation function is free from any distortion of the clustering pattern induced by peculiar motions and is well described by a power law in pair separation over the range     . The clustering of     galaxies in real space is well-fitted by a correlation length     and power-law slope     . The clustering amplitude increases slowly with absolute magnitude for galaxies fainter than M *, but rises more strongly at higher luminosities. At low luminosities, our results agree with measurements from the Southern Sky Redshift Survey 2 by Benoist et al. However, we find a weaker dependence of clustering strength on luminosity at the highest luminosities. The correlation function amplitude increases by a factor of 4.0 between     and −22.5, and the most luminous galaxies are 3.0 times more strongly clustered than L * galaxies. The power-law slope of the correlation function shows remarkably little variation for samples spanning a factor of 20 in luminosity. Our measurements are in very good agreement with the predictions of the hierarchical galaxy formation models of Benson et al.     

Linear and nonlinear vibration of non-uniform beams on two-parameter foundations using p-elements

A hierarchical finite element is presented for the geometrically nonlinear free and forced vibration of a non-uniform Timoshenko beam resting on a two-parameter foundation. Legendre orthogonal polynomials are used as enriching shape functions to avoid the shear-locking problem. With the enriching degrees of freedom, the accuracy of the computed results and the computational efficiency are greatly improved. The arc-length iterative method is used to solve the nonlinear eigenvalue equation. The computed results of linear and nonlinear vibration analyses show that the convergence of the proposed element is very fast with respect to the number of Legendre orthogonal polynomials used. Since the elastic foundation and the axial load applied at both ends of the beam affect the ratios of linear frequencies associated with the internal resonance, they influence the nonlinear vibration characteristics of the beam. The axial tensile stress of the beam in nonlinear vibration is investigated in this paper, and attention should be paid to the geometrically nonlinear vibration resulting in considerably large axial tensile stress in the beam.     

Relationship between Magmatic,Metamorphic, and Hydrothermal Processes within the Baikal–Muya Terrane (Eastern Siberia): Constraints from High-Precision Geochronological Study of the Kedrovskii Granitoid Massif

Doklady Earth Sciences - High-precision dating of granitoids is of key significance for age identification of the main stages of crust formation in various blocks of the continental crust. Here we...