中国大陆活动地块的运动与应变状态

从地壳运动与应变的角度给出了活动地块的定义,根据中国大陆及周边地区最近几年GPS观测得到的由1598个GPS站速度组成的统一速度场,估计了各个活动地块的运动与应变参数,分析了各个活动地块的运动与应变状态。中国大陆各地块存在一致的向东运动分量,但其南北分量是不一致的。西部地块存在一致的向北运动分量,东部地块存在一致的向南运动分量。在90°E以东,从喜马拉雅地块向NE方向,各地块的运动方向按顺时针方向旋转,各地块的运动速率是不相同的。从总体上看是西部大、东部小,南部大、北部小,西部大约是东部的3～4倍。各地块主压应变方向的空间分布是不相同的。在90°E以西各地块的主应变方向基本上为SN向,在青藏高原的东北部各地块的主压应变方向基本为NE向,在青藏高原东南部各地块的主压应变方向绕喜马拉雅构造东端顺时针方向旋转。各地块的主应变与剪应变率也是不同的,其中喜马拉雅、天山地块的主压和最大剪应变率最高,其次是拉萨、羌塘、滇西南、祁连与川滇地块。东部各地块的应变率较小。根据应变状态推测,喜马拉雅地块南北向的缩短速率为(15.2±1.5)mm/a,仍然是现今构造活动最强烈的地区,其次是天山地块,天山地块南北向的缩短速率为(10.1±0.9)mm/a。这两个地块目前仍处于隆升状态,从面应变看,面膨胀在中国大陆占优势,东部基本都是膨胀区,在西部面压缩与面膨胀从南向北相间分布。中国大陆的大多数东西向或近东西向断裂两侧的相对运动都是左旋或类似左旋走滑型的,大多数南北向断裂两侧的相对运动都是右旋或类似右旋走滑型的。GPS测定的阿尔金断裂中部的左旋走滑速为(4.8±1.3)mm/a,鲜水河断裂的左旋走滑速为(9.8±2.2)mm/a。地块边界断裂带的运动为地块运动创造了条件,地块及其边界的运动是协调一致的统一的,各个地块的活动程度是不相同的,统计检验结果表明,大多数地块之间的相对运动是显著的与非常显著的,这证明活动地块是客观存在的,喜马拉雅、拉萨、天山、羌塘和滇西南是活动最强烈的地块,中蒙、中朝西、阿拉善和华南是较稳定的地块,印度、太平洋、菲律宾板块与欧亚板块的互相作用力是中国大陆地块运动的主要驱动力。青藏高原地壳物质在印度板块NNE向的强烈推挤下,向NNE和NE方向运动,由于受到北部、东北部和东部地块的阻挡,经高原的东南部向印度洋方向运移,     

博格达山晚石炭纪造山活动的变形地质记录

主要由钙碱性火山岩、火山碎屑岩组成的博格达古岛弧是天山缝合造山带的重要组成部分 ,是一个发育较成熟的山链 ,其演化经历了晚古生代的韧性剪切收缩 ;中生代伸展调整及新生代再造山过程。晚古生代的造山活动在博格达山有很好的地质记录 ,并以显著的韧性剪切变形带的形成和发育同造山的褶皱构造为特点。剪切变形带内同构造的石英脉中的锆石U PbSHRIMP测年结果与山链中花岗岩、辉长岩年龄颇为一致 (311～ 316Ma) ,这个年龄反映在结束洋盆散聚、碰撞焊接的晚华力西期造山过程中 ,博格达古岛弧内存在一次虽不甚强烈 ,但又较为明显的构造岩浆事件 ,其成因可能与引起石炭纪大规模裂陆式喷发的深部断裂构造重新活动有关。     

矿山地质环境灾害与安全保障问题

阐述了矿山地质环境灾害和安全保障问题，分析了诱发矿山地质环境灾害的原因，提出了应采取的可持续发展对策和措施。     

添加剂对土体的加固作用及冻胀防治研究

将研制的高分子有机材料作为添加剂，加入到土体中，经过拌和夯实、干燥固结，能够起到稳定和提高土体的强度，并具有低渗透和低吸水等特性．冻胀试验表明：加入添加剂不仅能阻止土体冻胀的产生、外来水源的入侵及水分的迁移，还能隔断土体孔隙之间的联系，使水分在土体孔隙中不能运移，从而达到了防治冻胀的目的。     

滇池微生物解磷与聚磷作用的实验研究及磷的现代沉积与微生物成矿作用

滇池是世界上磷质来源最丰富的湖泊，是研究磷的现代沉积和微生物对磷循环作用及微生物成矿的天然场所。研究发现，滇池微生物种群和数量繁多，但能对磷溶解、转化、迁移、聚集、沉积的微生物主要有解磷菌和聚磷菌两类。这两类微生物与滇池磷的含量之间有一系列规律的相关性：在底泥磷高含量区域，解磷菌的种群和数量与底泥磷含量成负相关关系，与水体磷含量成正相关关系，而聚磷菌的种群和数量与底泥磷含量成正相关关系，与水体磷含量成负相关关系；在底泥磷低含量区域，上述相关性则相反。滇池中这种活着的微生物在自然环境条件下对磷的溶解、转化、迁移、聚集和沉积的作用，对古磷块岩微生物成矿说提供了可靠的依据，而且对以磷为限制性因子的湖、海、江河环境污染的防治提供了理论资料。     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

华山新生代隆升-剥蚀历史的裂变径迹热年代学分析

综合分析前人的热年代学数据发现华山地区自晚白垩世以来至少经历了三次快速隆升阶段，在120—57Ma间华山经历了缓慢隆升过程，约57Ma以来华山开始相对渭河地堑的快速隆升。其中，57—42Ma间、32—22Ma间和约8Ma以来均为相对快速隆升阶段，视隆升速度约为0．18～0．23mm／a；而42—32Ma问和22～8Ma间则为相对缓慢隆升过程，视隆升速度约为0．01mm／a。约57Ma以来华山的隆升—剥蚀量约为8．5km，平均隆升速度约为0．15mm／a；约32Ma以来的总隆升幅度约为4．5～5．1km，平均视隆升速度约为0．14～0．16mm／a。晚中生代以来华山的隆升过程实际上反映的是东秦岭的隆升过程，与区域地貌结构和周缘断陷盆地的演化过程有密切的成因联系，它表明东秦岭地区的三级等高峰顶面是120—57Ma、42—32Ma和22～8Ma间山脉缓慢隆升—剥蚀的结果，同时反映57—55Ma是渭河盆地开始快速裂陷和秦岭北麓正断层开始强烈活动的时间。     

柴达木盆地三湖地区第四系生物气的形成途径与运聚方式

柴达木盆地三湖(台吉乃尔湖、涩聂湖、达布逊湖)地区第四系生物气区是我国最大的生物气区。笔者系统采集了该气区21个天然气样品,测量了其组分和碳同位素组成,重点探讨了生物气形成途径和运聚方式。生物气δ~(13)C_1和δ~(13)C_(CO_2)均随深度增大而变重,显示了CO_2还原途径成气的特征。生物气δ~(13)C_1、δ~(13)C_(CO_2)和δD分布与CO_2还原方式形成的生物气的相应同位素值分布范围接近。在有关成因图解中这些数据主要位于CO_2还原途径成气范围内。生物气CO_2和CH_4之间的碳同位素分馏系数α_c>1.055,具有CO_2还原途径成气的特征。柴达木盆地第四纪干旱的古气候、较低的古温度、较高的沉积速率和水体中较高的硫酸盐含量使得甲烷菌的大量繁殖只能在较大的深度范围内才能实现,从而,有利于CO_2还原途径成气作用进行。涩北一号、涩北二号气田生物气δ~(13)C_1组成分布可能表明,生物气形成以后沿疏导层水平运移进入气藏,基本不存在垂向运移。该项研究对于进一步深入探讨生物气成因、形成条件,确定生物气模拟实验方式与条件,计算生物气资源量,建立成藏模式和选择天然气有利勘探区块均具有重要价值。     

GPS精密定位中的海潮位移改正

根据海洋负荷潮理论，利用NAO99b全球海潮模型，计算了中国部分IGS站的海潮位移改正，并将海潮位移改正应用到GPS数据处理当中。在GAMIT软件的解算过程中，分别按加入和不加入海潮位移改正，对GPS基线分量和测站坐标分别进行了计算和比较分析。结果表明，海潮位移改正无论是对GPS基线分量还是对测站坐标，都有一定的影响。     

使用Intel编译器优化中尺度模式MM5在奔腾4上的运行

本文介绍了一种在奔腾4处理器微机上Linux操作系统下的优化编译方法。作者通过查询、试验发现：使用Intel编译器优化中尺度模式MM5，能够使得MM5在奔腾4上的运行速度提高1．4～1．5倍。利用Intel编译器优化后的MM5模式，进行了三个月资料的计算，模式运行稳定。给出了一个使用Intel编译器和通常使用的PGI编译器分别编译的计算实例，对比表明：使用Intel编译器明显提高了运算速度，两种编译方法预报的降水场和形势场没有太大差异。