The photoelectron spectra of some Tl-Sb sulphosalts

The results of X-ray induced photoelectron spectroscopy (XPS) experiments on several phases of the ternary system Tl-Sb-S are reported. The binding energies of the inner S, Sb and Tl electrons increase with increasing quantities of Sb and decreasing amounts of Tl in these compounds. This is explained by the influences of the proportions of the bonded metals on the effective electron affinity of S. The higher proportions of the more electronegative element bonded to S cause the increase of its effective electron affinity. The results for Tl₂S (carlinite), Tl₃SbS₃, TlSbS₂ (weissbergite), TlAsS₂ (lorandite) and Sb₂S₃ (antimonite) can be interpreted in this way. The results for Tl₄S₃ suggest a predominantly covalent character of bonding for both Tl(III) and Tl(I), which are present in this sulfide. From comparison with Tl₃SbS₄ it could be supposed that Tl(III)-S bond has a more covalent character than Sb(V)-S bond. The results for Tl₃SbS₄ are in agreement with crystal structure data and the results of Moessbauer spectroscopy. For AsS (realgar) the binding energies of the inner electrons of As and S significantly increase, showing that the electrons in molecular orbitals are less strongly bonded to individual atoms, as compared to pure elements. The results for the amorphous TlSb₅S₈ (corresponding in composition to parapierrotite) suggest that in amorphous compound the Tl-S bonding is stronger and the coordination of Tl more regular than in a crystalline one.     

Small-scale patterns of meiofauna in a bryophyte covered tufa barrier (Plitvice Lakes,Croatia)

Meiobenthic fauna is complex and essential part of the stream benthos and it is known as intermediaries from bacteria to higher trophic levels. However, the dynamics and mechanisms regulating this community at small-scale largely have been neglected. This study was carried out to determine meiofaunal dynamics in a small scale-patterns influenced by flow velocity and other abiotic and biotic factors. We examined meiofauna within bryophytes on a tufa barrier in Plitvice Lakes National Park using a detailed taxonomic approach of various meiofaunal groups and their feeding guilds. We choose three microhabitats (slow, medium, fast) differing significantly in flow velocity above bryophytes. Bdelloid rotifers were the most abundant group in microhabitat with highest flow velocity, while in other two microhabitats nematodes and monogonont rotifers prevailed in abundance. Data on environmental variables and main meiofaunal taxa and feeding guilds were analyzed using redundancy analysis. This analysis indicated that microfilter feeding guild (e.g. bdelloid rotifers) was strongly affected by interaction of flow velocity and POM fractions. Other feeding guilds were influenced by temperature, oxygen and/or pH and did not prefer high flow velocity. Suction-feeder nematodes and microfilter-feeder rotifers were dominant on temporal and spatial scale, indicating their good adaptations on frequently disturbed conditions that prevailed on bryophyte covered tufa barrier. Our results provide comprehensive survey of diversity, density as well as trophic structure of meiofauna in aquatic bryophytes. Differences in meiofaunal composition and density between three microhabitats suggest that the meiofauna is relevant indicator of environmental changes even at small-scale pattern.     

A web‐based methodology for the prediction of approximate IDA curves

A web‐based methodology for the prediction of approximate IDA curves, which consists of two independent processes, is proposed. The result of the first process is a response database of the SDOF model, whereas the second process involves the prediction of approximate IDA curves from the response database by using n‐dimensional linear interpolation. Such an approach enables user‐friendly prediction of the seismic response parameters with high accuracy. In order to demonstrate the capabilities of the proposed methodology, a web application for the prediction of the approximate 16th, 50th and 84th fractile responses of an RC structure was developed. For the presented case study, the response database was computed for a set of 30 ground motion records and the discrete values of six structural parameters. Very good agreement between the computed and the approximated IDA curves of the four‐storey RC building was observed. Copyright © 2012 John Wiley & Sons, Ltd.     

IM‐based and EDP‐based decision models for the verification of the seismic collapse safety of buildings

Decision models for the verification of seismic collapse safety of buildings are introduced. The derivations are based on the concept of the acceptable (target) annual probability of collapse, whereas the decision making involves comparisons between seismic demand and capacity, which is familiar to engineering practitioners. Seismic demand, which corresponds to the design seismic action associated with a selected return period, can be expressed either in terms of an intensity measure (IM) or an engineering demand parameter (EDP). Seismic capacity, on the other hand, is defined by dividing the near‐collapse limit‐state IM or EDP by an appropriate risk‐targeted safety factor (γ _im or γ _edp ), which is the only safety factor used in the proposed decision model. Consequently, the seismic performance assessment of a building should be based on the best possible estimate. For a case study, it is shown that if the target collapse risk is set to 10^?4 (0.5% over a period of 50 years), and if the seismic demand corresponds to a return period of 475 years (10% over a period of 50 years), then it can be demonstrated that γ _im is approximately equal to 2.5 for very stiff buildings, whereas for buildings with long periods the value of γ _im can increase up to a value of approximately 5. The model using γ _edp is equal to that using γ _im only if it can be assumed that displacements, with consideration of nonlinear behavior, are equal to displacements from linear elastic analysis.     

Electromagnetic induction in a half-space with a cylindrical inhomogeneity

Summary The problem of electromagnetic induction in a half-space with a cylindrical inhomogeneity is treated. Solutions for TE and TM polarization of the exciting electromagnetic field are given, which can be used for computing sounding and profiling curves. The anisotropy of the surface impedance is pointed out, as well as a whole series of other interesting properties of the magnetotelluric field in this model; some of them are also demonstrated on the computed theoretical curves.     

Way of flying based on compressibility of fluids

Summary The forces due to compressibility of a fluid and their action on moving bodies have been studied. Also a possible practical application of these forces in a propulsion mechanism for vehicles has been discussed.

---

Zusammenfassung Im vorliegenden Beitrag wird die Wirkung der Kräfte auf bewegende Körper, die durch Kompressibilität des Mediums bedingt sind, untersucht. Es wird über die Möglichkeit der Konstruktion eines Mechanismus auf diesem Prinzip diskutiert.

     

Tunneling and interference of Alfvén waves

The propagation and interference of Alfvén waves in magnetic regions is studied. A multilayer approximation of the standard models of the solar atmosphere is used. In each layer, there is a linear law of temperature variation and a power law of Alfvén velocity variation. The analytical solutions of a wave equation are stitched at the layer boundaries. The low-frequency Alfvén waves (P > 1 s) are able to transfer the energy from sunspots into the corona by tunneling only. The chromosphere is not a resonance filter for the Alfvén waves. The interference and resonance of Alfvén waves are found to be important to wave propagation through the magnetic coronal arches. The transmission coefficient of Alfvén waves into the corona increases sharply on the resonance frequences. To take into account the wave absorption in the corona, a method of equivalent schemes is developed. The heating of a coronal arch by Alfvén waves is discussed.     

Study of the induction arrow at budkov (Czechoslovakia)

u¶rt;m mam u¶rt;au m ¶rt;a u¶rt;u ma u n aau anu mauaum n amuu ¶rt; a nu¶rt; 1967–1970. aamua ma auum m u¶rt;uu m nu¶rt;a u u am ¶rt;am a¶rt;a m mu ¶rt;¶rt;m -3 amu aua.

---

---

Dedicated to Academician Alois Zátopek on His 65th Birthday     

The use of laboratory measurements of electric resistivity of rocks for evaluating the magnetotelluric method

Summary A profile model of electric resistivity as a function of depth was compiled, the initial parameters being the values of the electric resistivity determined experimentally for basaltic and eclogitic rocks from the Bohemian Massif. The curves of the apparent resistivity were computed for this model and the measure of information evaluated for the various model layers. The dominant influence of the subsurface layer was proved.