The Inference of Geo-Mechanical Properties of Soft Rocks and their Degradation from Needle Penetration Tests

Needle penetration tests (NPTs) are used for inferring the uniaxial compressive strength of soft rocks, particularly in tunneling through squeezing rocks and foundations on weathered rocks in Japan. The device measures the applied load and the penetration depth of its needle. The ratio of applied load to penetration depth was originally called the needle penetration index (NPI). In this study, this device has been used to infer the geo-mechanical properties of soft rocks from Japan, Turkey, Indonesia, and Egypt. Various equations are presented to infer the geo-mechanical properties in terms of the NPI and compared with the experimental results. The possibility of evaluating the anisotropy of geo-mechanical properties is shown. Furthermore, the characterization of geo-mechanical properties of fault/fracture and slip (shear) surfaces is explained. Some additional equations are given to consider the degradation of geo-mechanical properties as a function of water content, weathering state, and number of cycles of freezing–thawing. Furthermore, the possibility of evaluating the time-dependency characteristics of soft rocks by needle penetration testing is discussed through experiments. It is shown that the effects of water content, weathering state, and number of cycles of freezing–thawing and time-dependency can be evaluated using the NPT technique.     

New lessons for technology policy and climate change: investment for innovation

The direction of UK energy policy requires a renewed impetus if the goal of climate change stabilization is to be met. Cost is not the main issue: a transformation to a low-carbon energy system may be no more expensive than meeting future energy demands with fossil fuels. Institutional barriers are preventing the large-scale adoption of the necessary technologies. New institutions to promote low-carbon technologies have not yet led to investment on the necessary scale. Further changes to the operation of the UK electricity markets to create a ‘level playing field’ for small-scale and intermittent generation are necessary. UK policy can contribute to international agreements following on from the Kyoto Accord, which also need to address the institutional barriers to energy technology development and transfer.     

Fluid inclusion and sulfur isotope thermometry of the Inkaya (Simav-Kütahya) Cu-Pb-Zn-(Ag) mineralization, NW TURKEY

The Inkaya Cu-Pb-Zn-(Ag) mineralization, located about 20 km west of the Simav (Kütahya-Turkey), is situated in the northern part of the Menderes Massif Metamorphics. The mineralization is located along an E-W trending fault in the Cambrian Simav metamorphics consisting of quartz-muscovite schist, quartz-biotite schist, muscovite schist, biotite schist and the Ar?kayas? formation composed of marbles. Mineralized veins are 30–35 cm in width. The primary mineralization is represented by abundant galena, sphalerite, chalcopyrite, pyrite, fahlore and minor amounts of cerussite, anglesite, digenite, enargite, chalcocite, covellite, bornite, limonite, hematite and goethite with gangue quartz. Fluid inclusion studies on the quartz samples collected from the mineralized veins indicate that the temperature range of the fluids is 235°C to 340°C and the salinities are 0.7 to 4.49 wt. % NaCl equivalent. The wide range of homogenization temperatures indicates that two different fluid generations were trapped in quartz. Sulfur isotope studies of the sulfide minerals showed that all of the δ ³⁴S values are between ?2.1 and 2.6 per mil. These values are a typical range for hydrothermal sulfide minerals that have sulfur derived from a magmatic source. Pyrite-galena and pyrite-chalcopyrite sulfur isotope fractionation is consistent with an approach to isotopic equilibrium, and calculated temperatures are 254.6 and 277.4°C for pyrite-galena and 274.7°C for pyrite-chalcopyrite. The microthermometric data and sulfur isotope thermometry indicate the existence of a hydrothermal fluid that circulated along the fault crossing the Simav metamorphics and Ar?kayas? formation. Fluid inclusion and sulfur isotope thermometry can be used in combination with ore petrographical and geological information to provide site-specific targets for meso-hypothermal metal concentrations.     

New insights into the mineralogy and weathering of the Meridiani Planum meteorite,Mars

Meridiani Planum is the first officially recognized meteorite find on the surface of Mars. It was discovered at and named after the landing site of the Mars Exploration Rover Opportunity. Based on its composition, it was classified as a IAB complex iron meteorite. Mössbauer spectra obtained by Opportunity are dominated by kamacite (α‐Fe‐Ni) and exhibit a small contribution of ferric oxide. Several small features in the spectra have been neglected to date. To shed more light on these features, five iron meteorite specimens were investigated as analogs to Meridiani Planum with a laboratory Mössbauer setup. Measurements were performed on (1) their metallic bulk, (2) troilite (FeS) inclusions, (3) cohenite ((Fe,Ni,Co)₃C) and schreibersite ((Fe,Ni)₃P), and (4) corroded rims. In addition to these room‐temperature measurements, a specimen from the Mundrabilla IAB‐ungrouped meteorite was measured at Mars‐equivalent temperatures. Based on these measurements, the features in Meridiani Planum spectra can be explained with the presence of small amounts of schreibersite and/or cohenite and iron oxides. The iron oxides can be attributed to a previously reported coating on Meridiani Planum. Their presence indicates weathering through the interaction of the meteorite with small amounts of water.     

Preliminary seismic microzonation of Sivas city (Turkey) using microtremor and refraction microtremor (ReMi) measurements

Sivas city, located in the inner east part of Anatolia (Turkey), is far from seismic sources. However, the city is under risk owing to strong earthquakes occurring around the area, and different soil conditions that can produce variation in the ground motion amplification. Microzonation of cities provides a basis for site-specific hazard analysis in urban settlements. In particular, seismic microzonation can be achieved by means of detailed seismic assessment of the area, including earthquake recordings and geological studies. In this paper, we propose a preliminary microzonation map for the city of Sivas, based on the variation in the dominant periods of the sediments covering the area. The periods are retrieved from microtremor measurements conducted at 114 sites, using the horizontal-to-vertical spectral ratio technique. The results of microtremor analysis were compared with those obtained from refraction microtremor measurements at two profiles crossing the studied area. According to the classification of dominant periods, Sivas area can be divided into four zones, probably prone to different levels of seismic hazard. However, specific studies including analysis of weak earthquakes are required in the future to validate our microzonation map.     

The importance of ambient and forced vibration measurements for the results of seismic performance assessment of buildings obtained by using a simplified non-linear procedure: case study of an old masonry building

The seismic performance assessment of existing masonry buildings involves many uncertainties, whose impact can be reduced to some extent by using non-destructive in-situ tests of such buildings, at least when destructive in-situ tests, which can provide more reliable results, cannot be performed. In this paper the extent of the potential beneficial effects achievable by calibration of a structural model of a building to its experimentally estimated vibration periods has been investigated. This was done by performing measurements of ambient and forced vibrations on an old two-storey masonry building, and by then assessing its seismic performance using a simplified nonlinear method. The results of numerical investigations revealed that the natural vibration periods of such buildings can be reproduced with sufficient accuracy, although it is possible that they will be overestimated or underestimated by analysts by up to around 40 %. This means that the accuracy of the prediction of the intermediate results of the seismic performance assessment of any particular building can be significantly increased by calibration of the structural model. Additionally, the beneficial effects of such calibration were observed even in the case of the final outcome of the nonlinear analysis, which is expressed through the near-collapse limit state capacity in terms of the peak ground acceleration.     

Lösmaterialackumulationer i blockhaven på Varangerhalvön i Nordnorge—en problemdis- kussion

Malmström, B. og Palmér, O.: Lösmaterialackumulationer i blockhaven på Varangerhalvön i Nordnorge—en problemdiskussion. Geografisk Tidsskrift 82: 82–87, Lund, 15. november 1982.

A type of mounds consisting of unconsolidated deposits mainly situated in blockfields is presented. Comparisons are made with pingo-like remnants in northern Scandinavia described by other authors.     

Appraisal of World Reference Base for Soil Resources—from a nordic point of view

During the project “Nordic Reference Soils” 13 different soils from Denmark, Finland, Norway and Sweden were selected in order to represent i) soils covering the main areas of the Nordic area, ii) soils from the different climatic regions, and iii) environmental sensitive soils. The 13 Nordic Reference Soils provided an excellent basis for the evaluation of the WRB (World Reference Base for Soil Resources) performance under Nordic conditions. Classification according to the WRB poses considerable problems. These concern podzolized soils, cultivated soils, and the acid sulfate soils. Only three out of the seven podzolized soils are allocated in taxons reflecting that they were podzolized. Four out of the nine cultivated soils were exposed to substantial anthropogenic impact, resulting in man-made Mollic A-horizons, which is not reflected in the classification. The WRB-classification of the soils is compared with the FAO and Soil Taxonomy classification. This highlighted some of the classification problems. This paper will propose changes to the WRB in order to improve the performance of the system for Nordic soils.

Geografisk Tidsskrift, Danish Journal of Geography 100: 15–26     

Palaeoenvironmental and palaeoecological change on the northern Tethyan carbonate platform during the Late Barremian to earliest Aptian

A major shift from Urgonian oligotrophic carbonate accumulation to orbitolinid‐rich mixed siliciclastic–carbonate deposition is observed near the Barremian–Aptian boundary in many sections both within and outside the shallow‐marine Tethyan Realm. This important facies change in the Swiss Helvetic Alps is documented here and interpreted in the context of general palaeoenvironmental change. To achieve this, a detailed micropalaeontological, sedimentological, mineralogical and geochemical study has been carried out on six sections across the upper part of the lower Schrattenkalk Member (Late Barremian), the Rawil Member (formerly ‘Lower Orbitolina Beds’, earliest Aptian) and the lowermost part of the upper Schrattenkalk Member (Early Aptian). The sediments of the Rawil Member exhibit inner‐platform facies with rudists, miliolids, orbitolinids and dasycladals to outer‐platform facies characterized by small benthic foraminifera, orbitolinids, crinoids and bryozoans. Stratigraphic trends in microfacies environments and the composition of microfossil assemblages, indicate that the Rawil Member includes a transgressive systems tract and the base of a highstand systems tract which are composed of an increasing number of parasequences in distal directions (five to nine in the sections studied here). The sea‐level rise discerned in the Rawil Member is coeval with increased detrital input and phosphorus burial, with maximum values up to 80 times and 21 times the background values in the subjacent part of the lower Schrattenkalk Member, respectively. Furthermore, the Rawil Member records the appearance of kaolinite, indicating a change towards tropical and more humid climate conditions. This change may have led to an increase in continental weathering rates and an associated increase in detrital and nutrient fluxes towards the ocean. The phase of climate change observed near the Barremian–Aptian boundary may have been triggered by a phase of intensified volcanic activity linked with the onset of the Ontong Java large igneous province and the Rawil Member may be the expression of a precursor episode to Oceanic Anoxic Event 1a in the shallow‐marine environment.