SMAP卫星海表盐度产品的检验与校正

In this study, sea surface salinity(SSS) Level 3(L3) daily product derived from soil moisture active passive(SMAP)during the year 2016, was validated and compared with SSS daily products derived from soil Moisture and ocean salinity(SMOS) and in-situ measurements. Generally, the root mean square error(RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the sea surface temperature(SST). Then, a regression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.     

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.     

Prediction of Flyrock in Mine Blasting: A New Computational Intelligence Approach

Natural Resources Research - Blasting is the predominant rock fragmentation technique in civil constructions, underground and surface mines. Flyrock is the unwanted throw of rock fragments during...     

不同插值方法在海域气象参数估算中的可靠性评价

海域条件下的气象观测具有数据稀少、变化大且观测站点分布不均的特点,其插值精度受插值方法影响较大。首先对常规插值方法进行理论分析,进而选取了反距离加权法、克里金法和样条函数法三种插值方法进行了插值实验和精度分析。根据渤海湾某区域的气象历史数据,采用不同方法绘制了温度、压强和湿度的插值平面图,并基于交叉验证的方式对各插值方法进行了对比,给出了不同方法的插值估算可靠性评价。结果表明:温度、压强和湿度的插值精度均是基于反距离加权法的插值结果最优(MAE_(温度)=2.42,RMSE_(温度)=1.92,MAE_(压强)=2.05,RMSE_(压强)=1.30,MAE_(湿度)=11.394, RMSE_(压强)=6.43),同时基于反距离加权法的图形绘制可视化效果也要优于其他两种方法。研究结果可为海域气象参数估算提供理论和实践依据。     

Effects of Anthropogenic Disturbance on Sediment Organic Carbon Mineralization Under Different Water Conditions in Coastal Wetland of a Subtropical Estuary

The changes in soil organic carbon(C) mineralization as affected by anthropogenic disturbance directly determine the role of soils as C source or sink in the global C budget. The objectives of this study were to investigate the effects of anthropogenic disturbance(aquaculture pond, pollutant discharge and agricultural activity) on soil organic C mineralization under different water conditions in the Minjiang River estuary wetland, Southeast China. The results showed that the organic C mineralization in the wetland soils was significantly affected by human disturbance and water conditions(P 0.001), and the interaction between human disturbance activities and water conditions was also significant(P 0.01). The C mineralization rate and the cumulative mineralized carbon dioxide-carbon(CO_2-C)(at the 49th day) ranked from highest to lowest as follows: Phragmites australis wetland soil aquaculture pond sediment soil near the discharge outlet rice paddy soil. This indicated that human disturbance inhibited the mineralization of C in soils of the Minjiang River estuary wetland, and the inhibition increased with the intensity of human disturbance. The data for cumulative mineralized CO_2-C showed a good fit(R~2 0.91) to the first-order kinetic model C_t = C_0(1 – exp(–kt)). The kinetic parameters C_0, k and C_0 k were significantly affected by human disturbance and water conditions. In addition, the total amount of mineralized C(in 49 d) was positively related to C_0, C_0 k and electrical conductivity of soils. These findings indicated that anthropogenic disturbance suppressed the organic C mineralization potential in subtropical coastal wetland soils, and changes of water pattern as affected by human activities in the future would have a strong influence on C cycling in the subtropical estuarine wetlands.     

An interconnect width and spacing optimization model considering scattering effect

As the feature size of the CMOS integrated circuit continues to shrink, the more and more serious scattering effect has a serious impact on interconnection performance, such as delay and bandwidth. Based on the impact of the scattering effect on latency and bandwidth, this paper first presents the quality-factor model which optimises latency and bandwidth effectively with the consideration of the scattering effect. Then we obtain the analytical model of line width and spacing with application of curve-fitting method. The proposed model has been verified and compared based on the nano-scale CMOS technology. This optimisation model algorithm is simple and can be applied to the interconnection system optimal design of nano-scale integrated circuits.     

鞍山地区陈台沟变质表壳岩的年龄

鞍山市东部陈台沟村附近，有一套以斜长角闪岩类、石英岩类和长英质片麻岩类等组成的变质表壳岩（陈台沟表壳岩），它虽被划归为鞍山群但同该地区公认的鞍山群明显不同。它同白家坟花岗岩（３．８Ｇａ）和陈台沟花岗岩（３．３Ｇａ－３．１Ｇａ）为断层接触。采用Ｋｏｂｅｒ提出的单颗粒锆石逐层蒸发－沉积方法，测定了侵入陈台沟表壳岩的两条花岗岩脉（Ａ９２１２－３，Ｃｈ１０）中锆石的年龄，Ａ９２１２－３测定了８粒锆石，年龄为３３５７±４Ｍａ－３３１５±４Ｍａ（误差均为２ｄ，Ｃｈ１０测定了３粒锆石，结果为３３３７±１２Ｍａ，３２２８±３７Ｍａ和１８１３±７Ｍａ。３３５７Ｍａ和３３３７Ｍａ是这两条花岗岩脉侵位时间。１８１３Ｍａ是后期地质作用的时间。陈台沟表壳岩的年龄大于３．３５Ｇａ，建议将陈台沟表壳岩从鞍山群分离出来单独建群。     

枣庄南部岩溶塌陷风险预测及评估

枣庄南部岩溶塌陷发育,严重制约着当地经济的发展,并对居民生产、生活构成威胁。通过对影响岩溶塌陷的各要素进行系统的调查,结合当地社会经济发展资料,采用信息预测的方法,对枣庄南部岩溶塌陷进行风险预测及评估,并对不同地段的岩溶塌陷风险等级进行划分,从而为枣庄市地下水资源合理开发利用、环境治理、保护与规划提供了决策依据。     

One‐dimensional consolidation with a threshold gradient: a Stefan problem with rate‐dependent latent heat

During the process of one‐dimensional consolidation with a threshold gradient, the seepage front moves downward gradually, and the problem is indicated as a Stefan problem. The novel feature in this Stefan problem is a latent heat that varies inversely with the rate of the moving boundary. An exact solution for the external load that increases in proportion to the square root of time is constructed using the similarity transformation technique. Computational examples concerning the effect of different parameters on the motion of the seepage front are presented. The exact solution provides a worthwhile benchmark for verifying the accuracy of numerical and approximate methods. Copyright © 2013 John Wiley & Sons, Ltd.     

论构造地球化学图解的局限性

本文从实践和理论两方面讨论了应用构造地球化学图解分辨玄武质岩石产出的大地构造环境这一方法所存在的问题,认为J. A. Pearce等给出的构造地球化学图解,在很大程度上,是一种岩性分辨图解,图解分辨中存在不确定性的根本原因是控制玄武质岩石形成的条件参数与构造环境并不完全存在一一对应的映射关系,应用图解应持谨慎态度。