海洋上层暖水在热带气旋迅速增强中的作用:基于台风威马逊(1409)的个例研究

在登陆海南岛之前,台风威马逊在南海北部从热带风暴级别迅速增强成为超强台风。观测数据的分析结果显示,海洋上层的异常暖水在威马逊的迅速增强过程中扮演了重要的角色。威马逊期间,南海北部的海表面温度相比于气候态海表面温度暖很多。这部分异常暖水为威马逊提供了更多的能量,从而导致了威马逊的迅速增强。数值模拟结果进一步证明,南海北部的暖水在台风威马逊的迅速增强过程中起重要作用。如果没有这团异常暖水的影响,威马逊只增强25 hPa,仅为有暖水影响条件下增强程度的58.1%。     

淤泥质潮滩地貌演变中的水动力及生物过程研究进展

淤泥质潮滩对于海岸防护、增加土地资源、保持生物多样性等具有重要作用。从淤泥质潮滩演变的主要驱动因子——潮流、波浪、生物作用及地下过程四个方面回顾和总结了潮滩演变动力地貌过程的相关研究进展,提出应关注潮滩短期演变规律、波浪与浮泥作用机理、生物生长与潮滩演变定量关系,以及地下过程作用机理等。     

Climate–growth relationship stability of <Emphasis Type="Italic">Picea crassifolia</Emphasis> on an elevation gradient,Qilian Mountain,Northwest China

Climate affects Picea crassifolia growth and climate change will lead to changes in the climate–growth relationship (i.e., the “divergence” phenomenon). However, standardization methods can also change the understanding of such a relationship. We tested the stability of this relationship by considering several variables: 1) two periods (1952–1980 and 1981–2009), 2) three elevations (2700, 3000, and 3300 m), and 3) chronologies detrended using cubic splines with two different flexibilities. With increasing elevation, the climatic factor limiting the radial growth of Picea crassifolia shifted from precipitation to temperature. At the elevation of 2700 m, the relationship between radial growth and mean temperature of the previous December changed so that the more flexible spline had a greater precipitation signal. At the elevation of 3000 m, positive correlation of radial growth with mean temperature and precipitation in September of the previous year became more significant. At the elevation of 3300 m, positive correlation between radial growth and precipitation of the current summer and the previous spring and autumn was no longer significant, whereas the positive correlation between radial growth and temperature of the current spring and summer strengthened. The detrending with the most flexible spline enhanced the precipitation signal at 2700 m, while that with the least flexible spline enhanced the temperature signal at 3300 m. All results indicated that the divergence phenomenon was affected by the climatic signals in the chronologies and that it was most dependent on the detrending method. This suggests it is necessary to select a suitable spline bootstrap for studies of growth divergence phenomena.     

Phase characteristic analysis of continuous depth air-gun source wavelet

Air guns are important sources for marine seismic exploration. Far-field wavelet of air gun arrays, as a necessary parameter for pre-stack processing and source models, plays an important role during marine seismic data processing and interpretation. When an air gun fires, it generates a series of air bubbles. Similar to onshore seismic exploration, the water forms a plastic fluid near the bubble; the farther the air gun is located from the measurement, the more steady and more accurately represented the wavelet will be. In practice, hydrophones should be placed more than 100 m from the air gun; however, traditional seismic cables cannot meet this requirement. On the other hand, vertical cables provide a viable solution to this problem. This study uses a vertical cable to receive wavelets from 38 air guns and data are collected offshore Southeast Qiong, where the water depth is over 1000 m. In this study, the wavelets measured using this technique coincide very well with the simulated wavelets and can therefore represent the real shape of the wavelets. This experiment fills a technology gap in China.     

An Investigation of Digestion Methods for Trace Elements in Bauxite and Their Determination in Ten Bauxite Reference Materials Using Inductively Coupled Plasma‐Mass Spectrometry

Trace elements from samples of bauxite deposits can provide useful information relevant to the exploration of the ore‐forming process. Sample digestion is a fundamental and critical stage in the process of geochemical analysis, which enables the acquisition of accurate trace element data by ICP‐MS. However, the conventional bomb digestion method with HF/HNO₃ results in a significant loss of rare earth elements (REEs) due to the formation of insoluble AlF₃ precipitates during the digestion of bauxite samples. In this study, the digestion capability of the following methods was investigated: (a) ‘Mg‐addition’ bomb digestion, (b) NH₄HF₂ open vessel digestion and (c) NH₄F open vessel digestion. ‘Mg‐addition’ bomb digestion can effectively suppress the formation of AlF₃ and simultaneously ensure the complete decomposition of resistant minerals in bauxite samples. The addition of MgO to the bauxite samples resulted in (Mg + Ca)/Al ratios ≥ 1. However, adding a large amount of MgO leads to significant blank contamination for some transition elements (V, Cr, Ni and Zn). The NH₄HF₂ or NH₄F open vessel digestion methods can also completely digest resistant minerals in bauxite samples in a short period of time (5 hr). Unlike conventional bomb digestion with HF/HNO₃, the white precipitates and the semi‐transparent gels present in the NH₄HF₂ and NH₄F digestion methods could be efficiently dissolved by evaporation with HClO₄. Based on these three optimised digestion methods, thirty‐seven trace elements including REEs in ten bauxite reference materials (RMs) were determined by ICP‐MS. The data obtained showed excellent inter‐method reproducibility (agreement within 5% for REEs). The relative standard deviation (% RSD) for most elements was < 6%. The concentrations of trace elements in the ten bauxite RMs showed agreement with the limited certified (Li, V, Cr, Cu, Zn, Ga, Sr, Zr and Pb) and information values (Co, Ba, Ce and Hf) available. New trace element data for the ten RMs are provided, some of which for the first time.     

Preparation of iron phosphate from sludge sourced from the electrocoagulation treatment of source-separated urine

In order to prepare iron phosphate by waste sludge, we report a method for effective utilization of the sludge obtained from the electrocoagulation treatment of source-separated urine. The sludge was dissolved with hydrochloric acid and pretreated with H₂O₂ and Na₃PO₄; finally, NaOH was added to precipitate iron phosphate from the solution. Thermal treatment of the precipitate at 750 °C in air yielded crystalline quartz-like anhydrous FePO₄. The precipitate was characterized by a number of thermal techniques such as thermogravimetry/differential thermal analysis, scanning electron microscopy, and X-ray powder diffraction.     

New variogram modeling method using MGGP and SVR

A critical step for kriging in geostatistics is estimation of the variogram. Traditional variogram modeling comprise of the experimental variogram calculation, appropriate variogram model selection and model parameter determination. Selecting of the variogram model and fitting of model parameters is the most controversial aspect of geostatistics. Shapes of valid variogram models are finite, and sometimes, the optimal shape of the model can not be fitted, leading to reduced estimation accuracy. In this paper, a new method is presented to automatically construct a model shape and fit model parameters to experimental variograms using Support Vector Regression (SVR) and Multi-Gene Genetic Programming (MGGP). The proposed method does not require the selection of a variogram model and can directly provide the model shape and parameters of the optimal variogram. The validity of the proposed method is demonstrated in a number of cases.