用地震危险性分析方法预测山东地区震害

依据地震危险性分析的思路，提出一种场地震害预测的方法。依此方法，给出山东地区５０ａ超越概率为１０％的震害预测略图     

Origin of a metamorphosed lithic clast in CM chondrite Grove Mountains 021536

Abstract– A metamorphosed lithic clast was discovered in the CM chondrite Grove Mountains 021536, which was collected in the Antarctica by the Chinese Antarctic Research Exploration team. The lithic clast is composed mainly of Fe‐rich olivine (Fo₆₂) with minor diopside (Fs_9.7–11.1Wo_48.3–51.6), plagioclase (An_43–46.5), nepheline, merrillite, Al‐rich chromite (21.8 wt% Al₂O₃; 4.43 wt% TiO₂), and pentlandite. Δ¹⁷O values of olivine in the lithic clast vary from ?3.9‰ to ?0.8‰. Mineral compositions and oxygen isotopic compositions of olivine suggest that the lithic clast has an exotic source different from the CM chondrite parent body. The clast could be derived from strong thermal metamorphism of pre‐existing chondrule that has experienced low‐temperature anhydrous alteration. The lithic clast is similar in mineral assemblage and chemistry to a few clasts observed in oxidized CV3 chondrites (Mokoia and Yamato‐86009) and might have been derived from the interior of the primitive CV asteroid. The apparent lack of hydration in the lithic clast indicates that the clast accreted into the CM chondrite after hydration of the CM components.     

PTB220型气压传感器调整方法

1概述目前内蒙古自动站气压传感器使用的输出方式有两种：RS232串行输出和模拟电压输出。当对气压传感器进行检定后,如果发现各检定点测量误差的总平均大于±0.3 hPa,则需要进行调整。     

闪电产生氮氧化物对青藏高原臭氧低谷形成的影响

为了进一步了解青藏高原闪电的产生氮氧化物（LNO_x）经由光化学反应对O₃浓度变化及夏季O₃低谷形成的可能影响,本文利用2005~2013年由OMI卫星得到的对流层NO₂垂直浓度柱（NO₂ VCD）、O₃总浓度柱（TOC）和O₃廓线以及星载光学瞬变探测器OTD和闪电成像仪LIS获取的总闪电数资料,对青藏高原和同纬度长江中下游地区的TOC和NO₂ VCD月均值时空分布特征、闪电与NO₂ VCD的相关性和O₃的垂直分布特征及其与LNO_x的关系进行了对比分析。结果表明,青藏高原的O₃低谷主要出现在夏季和秋季,其TOC值比同纬度长江中下游地区低约10~15 DU（Dobson unit）。青藏高原NO₂VCD总体较小,表现为夏高冬低的分布特征。青藏高原夏季O₃浓度受南亚高压的影响总体呈减小趋势,但因强雷暴天气导致对流层中上部LNO_x浓度升高,并随强上升气流向对流层顶输送,同时通过光化学反应使O₃浓度增加,缩小了青藏高原和同纬度地区的O₃浓度差,减缓了O₃总浓度的下降,抑制了夏季O₃低谷的进一步深化。     

The Analysis of Three Dimensional FEM for Interaction of the Gravity-arch Dam and Complex Ground at Geheyan,Qingjiang River

This paper introduces the analysis of three dimensional finite element method for the gravity-arch dam building on the complex ground. The foundation rock of dip and strain-slip, three faults, two weak intercalations and etc. arc considered in this calculation model. Water static pressure, gravity of dam, uplift, temperature stress and so on are computed, including three dimensional osmotic and temperature fields in the foundation. The range of calculation model is about 1400×900×600m2 . There are 1845 elements of all kinds, 3280 nodes in the network of finite element. The superlax iterative method is used to solve, and three dimensional perspective and software of after treatment are applied in analyses. The dimension of this computation is large, various results of treating complex problems are reasonable. The important basis has applied to designing unit. The computation is important practical significance for Geheyan Dam which is being built.     

S频段用于卫星导航的电磁环境研究

结合不同的信号调制方式,在满足一定伪距误差的条件下,从所需信号发射功率小和与北斗一代相互干扰小的角度论证了RNSS应用BOC（6,1）和BOC（6,2）两种调制方式的优势。并且对2 483.5~2 500 MHz频段中导航系统与其他通信系统之间的干扰作出估计,论证了GNSS系统与其他无线电业务的兼容性。     

Heave compensation system of lifting pipeline for deep-sea mining based on combined action of vibration absorber and accumulator

ABSTRACT

A heave compensation system combined with a vibration absorber and accumulator is proposed, with regard to the requirement for poly-metallic nodule mining systems at an ocean depth of 6,000?m in China. The principle of the compensation system was analyzed, its main parameters were designed, and its mathematical model was established. The system performance was simulated and analyzed in MATLAB, and the frequency domain characteristics and compensation rate of the system with different volume accumulators, and with or without vibration absorbers, were compared. A simulation test of the compensation system was conducted. The proposed compensation system had a better compensation effect for a random wave interference under level-6 sea conditions, and the compensation rate being more than 72% with optimal system parameters.     

欧氏聚类算法支持下的点云数据分割

欧氏聚类算法是多元统计中的一种重要分类方法,可以将其应用于测绘领域中点云数据的分割。本文首先计算点云数据中两点之间的欧氏距离,将距离小于指定阈值作为分为一类的判定准则;然后迭代计算,直至所有的类间距大于指定阈值,完成欧氏聚类分割。具体步骤为：①利用Octree法建立点云数据拓扑组织结构;②对每个点进行k近邻搜索,计算该点与k个邻近点之间的欧氏距离,最小归为一类;③设置一定的阈值,对步骤②迭代计算,直至所有类与类之间的距离大于指定阈值。试验证明,欧氏聚类算法对不同测量技术手段获取的点云数据均具有适用性,可以成功对点云数据进行分割,分割效果良好。