Methane-dominated thermochemical sulphate reduction in the Triassic Feixianguan Formation East Sichuan Basin, China: towards prediction of fatal H2S concentrations

New sour pools have recently found in the Lower Triassic Feixianguan Fm carbonate reservoirs in the East Sichuan Basin in China with H₂S up to 17.4% by volume. A recent blowout from a well drilled into this formation killed hundreds of people as a result of the percentage concentrations of H₂S. In order to assess the origin of fatal H₂S as well as the cause of petroleum alteration, H₂S concentrations and the isotopes, δ³⁴S and δ¹³C have been collected and measured in gas samples from reservoirs. Anhydrite, pyrite and elemental sulphur δ³⁴S values have been measured for comparison. The high concentrations of H₂S gas are found to occur at depths >3000 m (temperature now at 100 °C) in evaporated platform facies oolitic dolomite or limestone that contains anhydrite nodule occurrence within the reservoirs. Where H₂S concentrations are greater than 10% its δ³⁴S values lie between +12.0 and +13.2‰ CDT. This is within the range of anhydrite δ³⁴S values found within the Feixianguan Fm (+11.0 to +21.7‰; average 15.5±3.5‰ CDT). Thus H₂S must have been generated by thermochemical sulphate reduction (TSR) locally within the reservoirs. Burial history analysis and fluid inclusion data reveal that the temperature at which TSR occurred was greater than about 130–140 °C, suggesting that the present depth-temperature minimum is an artifact of post-TSR uplift. Both methane and ethane were actively involved in TSR since the petroleum became almost totally dry (no alkanes except methane) and methane δ¹³C values become significantly heavier as TSR proceeded. Methane δ¹³C difference thus reflects the extent of TSR. While it is tempting to use a present-day depth control (>3000 m) to predict the distribution of H₂S in the Feixianguan Fm, this is an invalid approach since TSR occurred when the formation was buried some 1000–2000 m deeper than it is at present. The likelihood of differential uplift across the basin means that it is important to develop a basinal understanding of the thermal history of the Feixianguan Fm so that it is possible to determine which parts of the basin have been hotter than 130–140 °C.     

A STUDY OF MICROTEKTITES IN THE PACIFIC OCEAN

In 1979, we found many small colorless transparent and light yellow-green glassy spherules in the surface layer and core sediment samples taken from the west of the Central Pacific Occan, which are considered to be microtektites. This finding is worthy of further determination of the range of strewn field and origin of tektites.     

虾蟹海产品香味的前体物质的加热变化

本文研究了虾蟹海产品香味的前体物质在加热前后的变化。实验结果表明：对虾和蟹肌肉中的糖原和不饱和脂肪酸在加热前后含量下降，糖原是Ｍａｉｌｌａｒｄ反应的基础物质．不饱和脂肪酸是虾蟹肌肉香味中羰基化合物的前体物质。虾蟹肌肉中主要积累的核苷酸成分ＡＭＰ在加热后减少，而肌肉提取物中的游离氨基酸和结合氨基酸，特别是疏水氨基酸含量均增加。     

可编程序控制器的多机联用

多台可编程序控制器通过输入、输出点的直接连接,传递命令、状态和数据,实现多机联用系统。     

环胶州湾公路海上段汽车尾气的环境影响

对类比路段进行连续模拟试验,进行现场调查,给出汽车尾气主要污染物的排污强度,预测了汽车尾气中CO、C_nH_m和NO_x的扩散范围。     

Refraction-Diffraction Mathematical Model for Waves With Lateral Energy Transmission Mechanism and Its Verification

To solve problems concerning wave elements and wave propagation, an effective way is the wave energy balance equation, which is widely applied in oceanography and ocean dynamics for its simple computation. The present papaer advances wave energy balance equations considering lateral energy transmission and energy loss as the governing equation for the study of wave refraction-diffraction. For the mathematical model, numerical simulation is made by means of difference method, and the result is verified with two examples.     

流形上的空间密度聚类算法研究

研究流形上的聚类分析，针对基于密度的空间聚类引入了流形概念，提出1种基于流形的密度聚类算法，该方法将流形的概念与聚类相结合，可以适用于样本为复杂分布的聚类。文中通过实例证明此算法的有效性。     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

Parabolic Wave Propagation Modelling in Orthogonal Coordinate Systems

This paper presents a numerical model study of the propagation of water waves using the parabolic approximation of the mild-slope equation in the orthogonal coordinate system. Two types of coordinate systems are studied: (a) a general form of orthogonal coordinate system and (b) the conformal system, a special form of orthogonal coordinate system. Two typical examples, namely, expanded breakwaters and a circular channel, are studied to validate the model. First, the examples are studied by use of the general orthogonal coordinates. Then the same examples are computed by use of the confonnal system. The computational results show that the confonnal coordinate system generally gives better predictions than the general orthogonal system. A numerical technique for generating the conformal grid is combined with the numerical model to improve the practicability of the model. The comparison between the result from the numerical grid system and that from the analytical grid system shows that reliable computational results can be obtained by use of the numerical confonnal grid system.     

AHP RESIN AND ITS URANIUM ADSORPTION MECHANISM

I. INTRODUCTION AHP resin is a new type of adsorbent and has been studied by the units concernedfor several years. There is little report about this work so far. AHP resin was synthesizedin aqueous phase with tetra-ethylene pentamine (TEPA), epichlorohydrin (ECH) andC-reagent as raw materials, and basic zinc carbonate (P_Z_n) and rubber solvent oil (120Gasoline) as pore-forming material. Compared with the technique of the amorphous lumpresin and that of the resin synthesized in oil phase, the new technique of resin synthesizedin aqueous phase manifests many advantages, such as raising the capacity of uranium-adsorption of the resin, simplifying the after-treatment process, reducing the cost, etc. Sea water, in which all kinds of cation and anion exist, is a system of electrolytes,and the concentrations of many ions are higher than the concentration of uranium for