The Huelva (Spain) Tsunami-Ready Station and Its Interaction with Storm Emma (March 2018)

Abstract

The sea level station operating since 1996 at Mazagón (Huelva, Spain) has been progressively upgraded to fit tsunami warning requirements, due to its location in one of the main regions at risk. Its radar water level sensor was complemented in 2017, with the addition of a pressure sensor. The performance of both sea level sensors and their response to sea level oscillations, at different frequencies, is assessed. Particular emphasis is put on the effect of extreme events, such as Storm Emma, when alternative methods to obtain 1-min data are tested, in contrast to the one based on arithmetic means. The overall differences are small, for the whole period of study (centered-root-mean-square-error below 1?cm, for 5-min, and hourly data; similar tidal parameters and sea level oscillations with periods between 30?s and 5?min). However, during Storm Emma, the pressure sensor presents sensibly lower readings than the radar, with the centered-root-mean-square-error rising to 80?mm on the March 2^nd 2018. A new method to compute 1-min data, based on medians, reduced this value to 10?mm for the same day.     

Parabolic Wave Propagation Modelling in Orthogonal Coordinate Systems

This paper presents a numerical model study of the propagation of water waves using the parabolic approximation of the mild-slope equation in the orthogonal coordinate system. Two types of coordinate systems are studied: (a) a general form of orthogonal coordinate system and (b) the conformal system, a special form of orthogonal coordinate system. Two typical examples, namely, expanded breakwaters and a circular channel, are studied to validate the model. First, the examples are studied by use of the general orthogonal coordinates. Then the same examples are computed by use of the confonnal system. The computational results show that the confonnal coordinate system generally gives better predictions than the general orthogonal system. A numerical technique for generating the conformal grid is combined with the numerical model to improve the practicability of the model. The comparison between the result from the numerical grid system and that from the analytical grid system shows that reliable computational results can be obtained by use of the numerical confonnal grid system.     

Short-Term Benthic Recolonization after Dredging in the Harbour of Ceuta, North Africa

Abstract. The benthic recovery after dredging (area: 2625 m²) was studied in a polluted and enclosed area of the harbour of Ceuta, in which the recolonization through the water column (larvae and adult bedload transport) could be limited by the lack of renewal. The benthos was sampled at two sites (control and dredged) using a van Veen grab and adopting a BACI (Before, After, Control, Impacted) approach. Five samplings were conducted after dredging (3, 15, 30, 90, 180 days). The proportion of gravel in the sediment of the dredged site increased after dredging, while the organic matter decreased. The impact on the community was estimated at species level, using both univariate and multivariate analyses. The maximum negative effect on benthic macrofauna was a reduction by 65% for species richness (15 days after dredging) and by 75% for abundance (3 days after dredging). Between 15 and 30 days after dredging, the abundance of some species such as the molluscs Parvicardium exiguum and Retusa obtusa and the polychaete Pseudomalacoceros tridentata increased considerably in the dredged site, while typical ‘opportunistic’ species such as Capitella capitata were disfavoured by the disturbance. For this small‐scale dredging, about 6 months are required for the disturbed area to re‐establish a sediment structure and a macrobenthic community similar to the undisturbed area. Small‐patch dredging operations are proposed in harbour management whenever possible, since they allow a quick re‐adjustment of the initial sediment structure and benthic communities.     

Gas hydrate disturbance fabrics of southern Hydrate Ridge sediments (ODP Leg 204): Relationship with texture and physical properties

Soupy and mousse-like fabrics are disturbance sedimentary features that result from the dissociation of gas hydrate, a process that releases water. During the core retrieval process, soupy and mousse-like fabrics are produced in the gas hydrate-bearing sediments due to changes in pressure and temperature conditions. Therefore, the identification of soupy and mousse-like fabrics can be used as a proxy for the presence of gas hydrate in addition to other evidence, such as pore water freshening or anomalously cool temperature. We present here grain-size results, mineralogical composition and magnetic susceptibility data of soupy and mousse-like samples from the southern Hydrate Ridge (Cascadia accretionary complex) acquired during Leg 204 of the Ocean Drilling Program. In order to study the relationship between sedimentary texture and the presence of gas hydrates, we have compared these results with the main textural and compositional data available from the same area. Most of the disturbed analyzed samples from the summit and the western flank of southern Hydrate Ridge show a mean grain size coarser than the average mean grain size of the hemipelagic samples from the same area. The depositional features of the sediments are not recognised due to disturbance. However, their granulometric statistical parameters and distribution curves, and magnetic susceptibility logs indicate that they correspond to a turbidite facies. These results suggest that gas hydrates in the southern Hydrate Ridge could form preferentially in coarser grain-size layers that could act as conduits feeding gas from below the BSR. Two samples from the uppermost metres near the seafloor at the summit of the southern Hydrate Ridge show a finer mean grain-size value than the average of hemipelagic samples. They were located where the highest amount of gas hydrates was detected, suggesting that in this area the availability of methane gas was high enough to generate gas hydrates, even within low-permeability layers. The mineralogical composition of the soupy and mousse-like sediments does not show any specific characteristic with respect to the other samples from the southern Hydrate Ridge.     

合浦珠母贝卵子电击脉冲参数的初步研究

运用电脉冲转基因仪对合浦珠母贝卵子进行电脉冲处理以优化电穿孔法转基因的电击参数。实验中调制百分比：100％；脉冲间隔：1．0s：电极距离：2mm；脉冲个数：5个，参数保持不变。用不同的电脉冲参数组合（脉冲电压100-400V、脉冲持续时间0．5～3．0ms、脉冲频率10～50kHz，共28个组合）对卵子电击，然后加入精子进行授精，统计各组受精率和孵化率，以受精率和孵化率达到50％以上为衡量指标。结果表明，合浦珠母贝卵子对低脉冲频率和高电压非常敏感，当频率低于20kHz或脉冲电压高于400V时对卵子损伤较大。脉冲持续时间对其影响不大，适应范围较宽。优化的转基因电击脉冲参教组合为：脉冲电压1.0kV／cm，脉冲持续时间20ms，脉冲频率50kHz，或者脉冲电压1．5kV／cm，脉冲持续时间1．5ms，脉冲频率50kHz。     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

桩式离岸堤保滩促淤工程消浪效果试验研究

在上海奉贤南北港保滩促淤工程中，采用了一种新型结构型式－桩式离岸堤，并通过物理模式试验进行了桩式离岸堤消浪效果研究。针对离岸堤通常建于近岸水区破波带的特点，重点研究水深，堤高以及堤身结构对波浪衰减的影响，同时对桩式离岸堤堤后水域的波浪底流速 分析探讨。研究结果表明，桩式离岸堤不仅具有良好的消浪效果。而且可在较大范围内改变波态，即由引起水体剧烈紊动的破波转变为浅水推进波，从而有效地改善海滩上的动力条件，促进海滩免受侵蚀，是一种具有广泛应用前景和新型保滩促淤结构。     

大亚湾微表层和次表层海水营养盐的研究

根据1998年秋季（10、11月）、1999年春、秋季（4、5、10月）5个航次对大亚湾海区微、次表层的调查结果，分析了微表层海水对氮、磷、硅营养盐的富集概况，讨论了营养盐与环境因子的关系。结果表明：大亚湾海区微表层海水对氮、磷、硅营养盐均有富集作用，因海况及季节不同，富集因数（EF）与其他海区的有所差别；无论夏季或秋季，大亚湾海区微表层海水中无机氮都以NH4－N为主要存在形态；其余水层则以NO3－N为主要存在形态。结果还表明，微表层、次表层海水中NH4－N与BOD5、COD测值都呈高度显著正相关，与PO4－P和SiO3-Si含量均无相关，说明大亚湾海区水中含氮有机物较含磷有机物丰富。     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.