塔里木陆块西北缘萨热克砂岩型铜矿床构造-流体演化对成矿的制约

塔里木陆块西北缘萨热克砂岩型铜矿床构造演化、流体演化与成矿之间具有密切关系,处于一个统一系统中。矿床成岩期方解石中包裹体水的δD值为-65.3‰~-99.2‰,改造成矿期石英包裹体水的δD值为-77.7‰~-96.3‰,成岩成矿期成矿流体δ~(18)OH_2O变化范围为-3.22‰~1.84‰,改造成矿期成矿流体δ~(18)OH_2O变化范围为-4.26‰~5.14‰,指示萨热克铜矿成岩期、改造期成矿流体主要为中生代大气降水及其经水岩作用而成的盆地卤水。矿石中辉铜矿δ~(34)S值为-24.7‰~-15.4‰,指示硫主要源自硫酸盐细菌与有机质还原,部分源于有机硫。构造与成矿流体演化对砂岩铜矿成矿起关键制约作用。盆地发展早期强烈的抬升运动使盆地周缘基底与古生界剥蚀,为富铜矿源层的形成提供了丰富物源,至晚侏罗世盆地发展晚期,长期演化积聚的巨量含矿流体在库孜贡苏组砾岩胶结物及裂隙中富集,在萨热克巴依盆地内形成具有经济意义的砂岩型铜矿床。     

滇西勐库地区退变质榴辉岩锆石U-Pb年龄及其地质意义

滇西双江县勐库地区退变质榴辉岩呈构造透镜体产于湾河蛇绿混杂岩带内,该发现弥补了东特提斯造山带高压-超高压变质岩在云南境内的空缺。在岩石学观察的基础上,借助激光剥蚀等离子体质谱(LA-ICP-MS)技术,对退变质榴辉岩中的锆石开展了精确的U-Pb年龄测定。所测试的3件样品分别采自3个不同的露头:样品PM011-9-1采自勐库控角剖面,样品PM038-15-4采自勐库地界剖面,样品GH1612-1-1采自勐库根恨大寨。测年结果显示,样品PM011-9-1的23个测点中存在2组较集中的~(206)Pb/~(238)U年龄,分别为801.0±9.8Ma和227.0±12Ma;样品PM038-15-4的26个测点中存在2组较集中的~(206)Pb/~(238)U年龄,分别为447.5±3.6Ma和291.7±6.3Ma;样品GH1612-1-1的30个测点中存在一组较集中的~(206)Pb/~(238)U年龄,为229.0±1.3Ma。结合区域资料及锆石阴极发光图像分析,801.0±9.8Ma应属退变质榴辉岩的原岩年龄,可能代表了Rodinia超大陆裂解早期出现的初始洋壳;而447.5±3.6Ma、291.7±6.3Ma和229.0±1.3～227.0±12Ma这3组年龄可能代表了退变质榴辉岩经历的3期变质作用年龄:分别为峰期硬柱石榴辉岩相的变质作用;中期角闪石榴辉岩相-高压麻粒岩相的退变质作用,为一个降压-增温的"热折返"过程;主期角闪岩相的退变质作用,是一个大幅度的降温-减压过程,奠定了勐库地区退变质榴辉岩的主体面貌。     

Development and verification of the comprehensive model for physical properties of hydrate sediment

Natural gas hydrate is widely distributed all over the world and may be a potential resource in the near future, whereas hydrate dissociation during the development affects wellbore stability and drilling safety. However, the present modeling of hydrate reservoir parameters ignored the influence of effective stress and only considered the hydrate saturation. In this paper, a series of stress sensitivity experiments for the unconsolidated sandstone were carried out, and the influence of mean effective stress on physical parameters was obtained; a comprehensive model for the physical parameters of hydrate reservoir was developed subsequently. With the help of ABAQUS finite element software, the established comprehensive model was verified by the use of the wellbore stability numerical model of hydrate reservoir. The verification results show that ignoring the effect of mean effective stress on the parameters of hydrate formation aggravates the invasion of drilling fluid into the hydrate formation. Besides, ignoring the stress sensitivity of reservoir physical parameters will underestimate the wellbore instability during hydrate drilling, which will be a threat to the safety of gas hydrate drilling. At the end of the drilling operation, the maximum plastic strain of the model for considering and not considering stress sensitivity was 0.0145 and 0.0138, respectively. Therefore, the established comprehensive model will provide a theoretical support for accurately predicting the engineering geological disasters in hydrate development process.     

Evolution of the shape parameter in the Weibull distribution for brittle rocks under uniaxial compression

Applying the statistical damage theory based on the Weibull distribution to describe rock deformation and failure processes is an important development in rock mechanics. The shape parameter of the Weibull distribution, m, determines the basic shape of the distribution curve; additionally, it also represents a physical characteristic which can be applied when constructing rock constitutive models. To study the evolution of m during rock failure when applying the Weibull distribution to rock mechanics, uniaxial cyclic loading tests of shale specimens were conducted and previous rock mechanics experiments under different temperatures and loading rates were reviewed. The results indicate that m varied with the accumulation of damage but was almost constant between the volume expansion point and the peak strength point of each specimen. Combined with previous studies about the accelerated failure behavior of rocks, we conclude that between the volume expansion point and the peak strength point, the mechanical behavior of the rock fracture process did not change significantly. Based on the characteristics of m at different damage stages during the rock failure process, ranges of m values at different damage stages are proposed. The conclusions reached in this study may be used as an important reference for theoretical research on rock mechanics.     

余姚—丽水断裂带嵊州地区燕山期主要构造特征

余姚—丽水断裂带是浙东南地区活动时间长、延伸远、发育比较宽的一条NE—NNE展布的断裂构造带,在浙江嵊州地区上火山岩系磨石山群和下火山岩系永康群中构造形迹表现十分明显。余姚—丽水断裂带由一系列NE—NNE向控制区内白垩纪盆地形成与发展的正断层,以及NE—NNE走向、自北西向南东逆冲的叠瓦状断层和轴迹呈NE—NNE向的褶皱组成。通过对其构造活动特征及控制新老地层的时序关系研究,结合区域构造活动规律和时空演化关系等综合分析认为: 正断层形成时间较早,控制白垩纪盆地的形成和发展,与早白垩世岩石圈伸展减薄形成的拉张作用密切相关; 叠瓦状逆冲断层及斜歪褶皱、紧闭同斜褶皱等褶、断构造组合形成于晚白垩世之后,其动力学机制可能与古太平洋构造域向太平洋构造域的转换效应有关。研究成果为深入探讨浙东地区燕山期构造演化提供了新的素材和资料。     

Porosity and wave velocity evolution of granite after high-temperature treatment: a review

The evolution of porosity and changes in wave velocity in granite after high-temperature treatment has been experimentally investigated in different studies. Statistical analysis of the test results shows that there is a temperature threshold value that leads to variations in porosity and wave velocity. At a temperature that is less than 200 °C, the porosity of granite slowly increases with increases in temperature, while the wave velocity decreases. When the temperature is greater than 200 °C (especially between 400 and 600 °C), the porosity quickly increases, while the wave velocity substantially decreases. The temperature ranges of room temperature to 200 and 200–400 °C correspond to the undamaged state and the micro-damage state, respectively. The results confirm that there is an important link between the variations of physical and mechanical properties in response to thermal treatment. By studying the relationships among rock porosity, wave velocity and temperature, this provides the basis for solving multi-variable coupling problems under high temperatures for the thermal exploitation of petroleum and safe disposal of nuclear waste.     

A GIS-based method of risk assessment on no. 11 coal-floor water inrush from Ordovician limestone in Hancheng mining area,China

The no. 11 coal seam in the deep area of Hancheng mining area is mining in recent years, which is threatened by the water inrush from the Ordovician limestone aquifer. Coal-floor water inrush is governed by the water abundance of coal-floor aquifer, the water-resisting performance of coal-floor aquitard, and the pathway connecting the water source and the working face. To make an accuracy risk assessment of water inrush from the no. 11 coal seam floor, a GIS-based vulnerability index method (VIM) is adopted for its superior comprehensive consideration of more controlling factors, powerful spatial analysis, and intuitively display functions. This study firstly established an index system including the water pressure of the coal-floor aquifer, the unit water inflow, the thickness, the core recovery percentage, the thickness ratio of brittle rocks to ductile rocks, the thickness of effective aquitard, and the accumulated length of faults and folds, of which the former six indexes governed the water abundance of the coal-floor aquifer which was combined with the last two factors to determine the risk of coal-floor water inrush. Secondly, the thematic map of each controlling factor is established by GIS using the geological prospecting data, and the weight of each factor is determined by the analytic hierarchy process (AHP) after consulting the expert review panel. At last, a vulnerability index is obtained and used to assess the risk of coal-floor water inrush of the no. 11 coal seam. The risk of water inrush of the no. 11 coal seam of the study area was ranked to three zones: the southeastern shallow area in red color is the dangerous zone, the wide northwestern area in green color is the safe zone, and the transition area in yellow color is the moderate-risk zone. Compared with the actual water-inrush incidents, the risk assessment result was verified to achieve an accuracy of 82.35%, which is proved to be a dependable reference for the prevention and controlling of coal-floor water inrush of the no. 11 coal seam in Hancheng mining area.     

Stability study on the northern batter of MBC Open Pit using Plaxis 3D

Cracks appeared on the northern batter at Maddingley Brown Coal Open Pit Mine, Victoria, Australia, on 8 November 2013 and a 2-day rainfall event happened 5 days later. This study models the stability of the northern batter considering the effect of the rainfall event and an emergency buttress using finite element method (FEM) encoded in Plaxis 3D. It is found that the batter tended to lead to block sliding after overburden removal. The observed vertical crack would be a combined action of the overburden removal and groundwater flow. The simulated location of cracks agrees well with the actual location, and the simulated heave of the coal seam is in good agreement with the experience in Victoria brown coal open pit mining. The rainfall accelerated the development of the cracks. With the construction of the emergency buttress, the batter became stable that is in good agreement with the monitored data.     

湘西-黔东下寒武统清虚洞组藻灰岩沉积特征及其找矿意义

铅锌矿是湘西-黔东地区的优势矿种,资源丰富,开发历史悠久,找矿潜力巨大。综合分析前人有关湘西-黔东生物礁的资料,介绍了藻灰岩的沉积特征,并结合大量实际地质资料,对藻灰岩控矿进行了论述。结果表明: 成矿物质主要来源于藻类及碳酸盐泥对Pb²⁺、Zn²⁺离子的吸取,矿床成因属于沉积成岩矿床类型,兼有成岩期后矿床性质; 藻礁灰岩与不同岩性的接合部位及其附近等微地球化学障区,往往就是铅锌富矿体产出部位; 藻礁灰岩与礁间通道的薄层泥质白云质灰岩呈指状交叉接触处,也常有铅锌富矿体产出; 铅锌富矿体基本上产于清虚洞组灰岩段中,且明显受该段藻礁灰岩控制。为满足国内外对铅锌矿日益增长的消费需要,深入研究区内铅锌矿的地层岩相岩石控矿因素及其富集规律,指导该地区藻灰岩中铅锌矿找矿工作,具有重要的现实意义。     

全国地热资源调查评价与勘查示范工程进展

地热作为一种清洁能源,在我国经济发展与能源转型过程中正发挥着越来越重要的作用。“全国地热资源调查评价与勘查示范工程”自实施以来,主要开展了京津冀地区地热资源评价以及东南沿海和青藏高原东部干热岩的勘查等工作。这些工作的开展在获得一系列科研突破成果的同时,也解决了大量地热开发的工程问题,积累了大量成果和经验。该文对工程取得的进展及成果进行了总结,对工作开展中出现的问题进行了探讨,可用于指导我国地热资源勘查开发工作。