Tide-induced variability in beach surface moisture: Observations and modelling

The moisture content w_s of a beach surface strongly controls the availability of sand for aeolian transport. Our predictive capability of the spatiotemporal variability in w_s, which depends to a large extent on water table depth, is, however, limited. Here we show that water table fluctuations and surface moisture content observed during a 10-day period on a medium-grained (365μm) planar (1:30) beach can be predicted well with the nonlinear Boussinesq equation extended to include run-up infiltration and a soil–water retention curve under the assumption of hydrostatic equilibrium. On the intertidal part of the beach the water table is observed and predicted to continuously fall from the moment the beach surface emerges from the falling tide to just before it is submerged by the incoming tide. We find that on the lower 30% of the intertidal beach the water table remains within 0.1–0.2 m from the surface and that the sand is always saturated (w_s≈20%, by mass). Higher up on the intertidal beach, the surface can dry to about 5% when the water table has fallen to 0.4–0.5 m beneath the surface. Above the high-tide level the water table is always too deep (>0.5 m) to affect surface moisture and, without precipitation, the sand is dry (w_s < 5 − 8%). Because the water table depth on the emerged part of the intertidal beach increases with time irrespective of whether the (ocean) tide falls or rises, we find no need to include hysteresis (wetting and drying) effects in the surface-moisture modelling. Model simulations suggest that at the present planar beach only the part well above mean sea level can dry sufficiently (w_s < 10%) for sand to become available for aeolian transport. ©2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Along-shelf hydrographic anomalies in the Nordic Seas (1960–2011): locally generated or advective signals?

The northward flow of warm and saline Atlantic Water through the eastern Nordic Seas sustains a spring-bloom ecosystem that hosts some of the world’s largest commercial fish stocks. Abrupt climatic changes, or changes beyond species-specific thresholds, may have severe effects on species abundance and distribution. Here, we utilize a numerical ocean model hindcast to explore the similarities and differences between large-scale anomalies, such as great salinity anomalies, and along-shelf hydrographic anomalies of regional origin, which represent abrupt changes at subannual time scales. The large-scale anomalies enter the Nordic Seas to the south and propagate northward at a speed one order of magnitude less than the Atlantic Water current speed. On the contrary, wind-generated along-shelf anomalies appear simultaneously along the Norwegian continental shelf and propagate northward at speeds associated with topographically trapped Kelvin waves. This process involves changes in the vertical extent of the Atlantic Water along the continental slope. Such a dynamic oceanic response both affects thermal habitats and has the potential to ventilate shelf waters by modifying the cross-shelf transport of nutrients and key prey items for early stages of fish.     

Fluvial seed dispersal of riparian trees: transport and depositional processes

Fluvial seed dispersal considers both the transport and deposition of seeds where channel geomorphic structures, hydrology and seed dispersal traits contribute to transport times and depositional locations. This study examines the influence of stream flow patterns on fluvial seed dispersal of buoyant white alder (Alnus rhombifolia) seeds by applying a one‐dimensional transport model. Conceptually, the model separates the stream into two components: (i) the main channel where the seeds are transported downstream; and (ii) the transient storage zone where seeds are temporarily detained or deposited on the river bank. Transport processes are characterized by an advection–dispersion equation which is coupled to a transient storage model using an exponential decay term. The model parameters: longitudinal dispersion (D_L), exchange coefficient (α), main channel area (A) and storage zone (A_s) are estimated based on field experiments conducted in a confined, bedrock‐gravel bed river with pool‐riffle morphology located in coastal northern California. The riparian zone is inhabited by Alnus rhombifolia that disperse buoyant seeds in mid‐spring coinciding with the end of the wet, Mediterranean season. Artificial seeds, with similar traits of buoyancy and density to alder seeds, were used to quantify transport times and depositional locations. Preferential deposition resulted in stream reaches with larger A_s, high A_s/A ratios, and faster exchange coefficients corresponding to divergent stream flow (back‐eddies, re‐circulating flow, flow expansions) caused by geomorphic structures such as the ends of bar/riffle features and bends in the stream. The results demonstrate the importance of transient storage for seed transport and depositional processes. Morphological features that increase a channel's complexity create complex flow structures that detain seeds and provide a greater opportunity for deposition to occur. The model provides a simplification of river hydraulics to represent dispersal dynamics and lends itself to further understanding of hydrochory processes and associated population structure. Copyright © 2015 John Wiley & Sons, Ltd.     

Estimating benthic invertebrate production in lakes: a comparison of methods and scaling from individual taxa to the whole-lake level

Studies of aquatic invertebrate production have been primarily conducted at the level of individual taxa or populations. Advancing our understanding of the functioning and energy flow in aquatic ecosystems necessitates scaling-up to community and whole-lake levels, as well as integrating across benthic and pelagic habitats and across multiple trophic levels. In this paper, we compare a suite of non-cohort based methods for estimating benthic invertebrate production at subpopulation, habitat, and whole-lake levels for Sparkling Lake, WI, USA. Estimates of the overall mean benthic invertebrate production (i.e. whole-lake level) ranged from 1.9 to 5.0 g DM m⁻² y⁻¹, depending on the method. Production estimates varied widely among depths and habitats, and there was general qualitative agreement among methods with regards to differences in production among habitats. However, there were also consistent and systematic differences among methods. The size-frequency method gave the highest, while the regression model of Banse and Mosher (Ecol Monogr 50:355–379, 1980) gave the lowest production estimates. The regression model of Plante and Downing (Can J Fish Aquat Sci 46:1489–1498, 1989) had the lowest average coefficients of variation at habitat (CV = 0.17) and whole-lake (CV = 0.08) levels. At the habitat level, variance in production estimates decreased with sampling effort, with little improvement after 10–15 samples. Our study shows how different production estimates can be generated from the same field data, though aggregating estimates up to the whole-lake level does produce an averaging effect that tends to reduce variance.     

Impact of single inclined faults on the fluid flow and heat transport: results from 3-D finite element simulations

The impact of inclined faults on the hydrothermal field is assessed by adding simplified structural settings to synthetic models. This study is innovative in carrying out numerical simulations because it integrates the real 3-D nature of flow influenced by a fault in a porous medium, thereby providing a useful tool for complex geothermal modelling. The 3-D simulations for the coupled fluid flow and heat transport processes are based on the finite element method. In the model, one geological layer is dissected by a dipping fault. Sensitivity analyses are conducted to quantify the effects of the fault’s transmissivity on the fluid flow and thermal field. Different fault models are compared with a model where no fault is present to evaluate the effect of varying fault transmissivity. The results show that faults have a significant impact on the hydrothermal field. Varying either the fault zone width or the fault permeability will result in relevant differences in the pressure, velocity and temperature field. A linear relationship between fault zone width and fluid velocity is found, indicating that velocities increase with decreasing widths. The faults act as preferential pathways for advective heat transport in case of highly transmissive faults, whereas almost no fluid may be transported through poorly transmissive faults.     

Interactive Visualization to Advance Earthquake Simulation

The geological sciences are challenged to manage and interpret increasing volumes of data as observations and simulations increase in size and complexity. For example, simulations of earthquake-related processes typically generate complex, time-varying data sets in two or more dimensions. To facilitate interpretation and analysis of these data sets, evaluate the underlying models, and to drive future calculations, we have developed methods of interactive visualization with a special focus on using immersive virtual reality (VR) environments to interact with models of Earth’s surface and interior. Virtual mapping tools allow virtual “field studies” in inaccessible regions. Interactive tools allow us to manipulate shapes in order to construct models of geological features for geodynamic models, while feature extraction tools support quantitative measurement of structures that emerge from numerical simulation or field observations, thereby enabling us to improve our interpretation of the dynamical processes that drive earthquakes. VR has traditionally been used primarily as a presentation tool, albeit with active navigation through data. Reaping the full intellectual benefits of immersive VR as a tool for scientific analysis requires building on the method’s strengths, that is, using both 3D perception and interaction with observed or simulated data. This approach also takes advantage of the specialized skills of geological scientists who are trained to interpret, the often limited, geological and geophysical data available from field observations.     

BiSON performance

Since 1981 we have been operating the Birmingham Solar-Oscillations Network (BiSON), a global network of resonant-scattering spectrometers, observing the low-l solar p modes. Here we discuss historical developments, culminating in the establishment of a 6-station network in 1992 September, and the subsequent performance of that network. The data record of each station from 1992 to 1994 has been analysed in terms of weather and equipment breakdowns. Our early experience suggests that the best long-term coverage possible with a 6-station network is limited in practice to about 80%, which falls short of previous predictions.     

The Gash Breccias of the Pembroke Peninsula,SW Wales

The thickest development of Carboniferous Limestone in Great Britain (about 1200 m) is in the Pembroke Peninsula of SW Wales. In various places, the regularity of the normally well‐stratified limestone is broken by zones of disturbance, which are spectacularly displayed in magnificent near‐vertical cliff sections. The zones generally occupy the whole of the 50 m‐high cliffs and are up to 300 m wide. The chief component of these zones is a chaotic, clast‐supported breccia, composed of angular limestone fragments welded together with varying degrees of firmness by sparry calcite veining or a normally sparse, red‐pink sandy or silty matrix. The breccias are very easy to distinguish and form a striking contrast to the grey cliff scenery hereabouts ( Figs 1, 2 ), yet they have not been discussed much—until now.

Figure 1 Open in figure viewer PowerPoint Location map, showing localities mentioned in the text, the outcrop of the Carboniferous Limestone, the chief synclinal axes and the distribution envelope of the Gash Breccias (after Thomas 1971 ). 1. Flimston Bay; 2. Bullslaughter Bay (west); 3. Bullslaughter bay (east); 4. Trevallen; 5. Box Bay; 6. Draught; 7. Whitesheet Rock; 8. Lydstep Point; 9. St Margaret's Point; 10. Den Point; 11. Valleyfield Top; 12. Pembroke Castle.     

Equilibrium and structural studies of silicon(iv) and aluminium(iii) in aqueous solution. V. Acidity constants of silicic acid and the ionic product of water in the medium range 0.05–2.0 M Na(CI) at 25°C

The apparent ionization constants for silicic acid, k₁ and k₂, and the ionic product of water, k_w, have been determined in 0.05, 0.1, 0.2, 0.4 and 2.0 M Na(CI) media at 25°C. The medium dependence of these constants was found to fit equations of the form

$\text{log}\text{k}{}_{\mathrm{i}}\text{=}\text{log}\text{K}{}_{\mathrm{i}}\text{+a}{}_{\mathrm{i}}\text{I}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{(1+I}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{)+b}{}_{\mathrm{i}}\text{I}$

where K₁ is the ionization constant in pure water, α_i and b_i are parameters of which b_i has been adjusted to present data. The following results were obtained (α_i, b_i): pK₁ = 9.84, (1.022, ?0.11); pK₂ = 13.43, (2.044, ?0.20); and pK_w = 14.01 (1.022, ?0.22). k_i values are collected in Tables I and II. Attempts have been made to explain the medium dependence of k₁ and k₂ with weak sodium silicate complexing according to the equilibria

$\text{Na}{}^{\mathrm{+}}\text{+}\text{SiO(OH)}{}^{\mathrm{?}}{}_3\text{?}\text{NaSiO(OH)}{}_3\text{;k}{}_{11}$

$\text{Na}{}^{\mathrm{+}}\text{+}\text{SiO}{}_2\text{(OH)}{}^2{}_2\text{?}\text{NaSiO}{}_2\text{(HO)}{}^{\mathrm{?}}{}_2\text{; k}{}_{21}$

giving k₁₁ = 0.37M^?1 and k₂₁= 3.0M^?1. However, these weak interactions cannot be interpreted unambiguously from potentiometric data at different 1-levels. Probably the medium dependence could equally well be expressed by variations in the activity coefficients.The measurements were performed as potentiometric titrations using a hydrogen electrode. The average number of OH^- reacted per Si(OH)₄, Z, has been varied within the limits 0 ? Z ? 1.1 and B₁, the total concentration of Si(OH)₄, between 0.001 M and 0.008 M. k₁ was evaluated from experimental data with B ? 0.003 M, and k₂ with B ? 0.008 M and Z ? 0.95.     

The impact of oestrogenic and androgenic contamination on marine organisms in the United Kingdom--summary of the EDMAR programme. Endocrine Disruption in the Marine Environment

This paper summarises results of the EDMAR programme which is investigating oestrogenic and androgenic endocrine disruption in UK coastal waters. Most of the data concern fish. Four species (flounder, viviparous blenny and two sand gobies) are experiencing feminisation in industrialised estuaries. In males this includes vitellogenin (VTG) synthesis, ovotestis induction and/or feminised sexual characteristics. Although reproductive success may be impaired in some cases, implications for fish populations are still unclear. Suspected causative contaminants include natural oestrogenic substances and synthetic oestrogen mimics. The majority of the oestrogenic activity is adsorbed to sediments, and routes of exposure may include benthic food chain transfer. Some natural androgenic substances are also being discharged to estuaries, but their activity appears low.