Fine resolution 3D temperature fields off Kerguelen from instrumented penguins

The use of diving animals as autonomous vectors of oceanographic instruments is rapidly increasing, because this approach yields cost-efficient new information and can be used in previously poorly sampled areas. However, methods for analyzing the collected data are still under development. In particular, difficulties may arise from the heterogeneous data distribution linked to animals’ behavior. Here we show how raw temperature data collected by penguin-borne loggers were transformed to a regular gridded dataset that provided new information on the local circulation off Kerguelen. A total of 16 king penguins (Aptenodytes patagonicus) were equipped with satellite-positioning transmitters and with temperature–time–depth recorders (TTDRs) to record dive depth and sea temperature. The penguins’ foraging trips recorded during five summers ranged from 140 to 600 km from the colony and 11,000 dives >100 m were recorded. Temperature measurements recorded during diving were used to produce detailed 3D temperature fields of the area (0–200 m). The data treatment included dive location, determination of the vertical profile for each dive, averaging and gridding of those profiles onto 0.1°×0.1° cells, and optimal interpolation in both the horizontal and vertical using an objective analysis. Horizontal fields of temperature at the surface and 100 m are presented, as well as a vertical section along the main foraging direction of the penguins. Compared to conventional temperature databases (Levitus World Ocean Atlas and historical stations available in the area), the 3D temperature fields collected from penguins are extremely finely resolved, by one order finer. Although TTDRs were less accurate than conventional instruments, such a high spatial resolution of penguin-derived data provided unprecedented detailed information on the upper level circulation pattern east of Kerguelen, as well as the iron-enrichment mechanism leading to a high primary production over the Kerguelen Plateau.     

The Loyalty—New Hebrides Arc collision: Effects on the Loyalty Ridge and basin system,Southwest Pacific (first results of the ZoNéCo programme)

The ZoNéCo 1 and 2 cruises of Ifremer's Research Vessel L'Atalante, collected new swath bathymetry and geophysical data over the southern and northern segments of the basins and ridges forming the Loyalty system. Between the two surveyed areas, previous studies found evidence for the resistance of the Loyalty Ridge to subduction beneath the New Hebrides trench near 22°S–169°E. On the subducted plate, except for seismicity related to the downbending of the Australian plate, recorded shallow seismicity is sparse within the Loyalty system (Ridge and Basin) where reliable focal mechanism solutions are almost absent.Swath bathymetry, seismic reflection and magnetic data acquired during the ZoNéCo 1 and 2 cruises revealed a transverse asymmetric morphology in the Loyalty system, and an along-strike horst and graben structure on the discontinuous Loyalty Ridge. South of 23°50S and at 20°S, the two WSW-ENE-trending fault systems, respectively, sinistral and dextral, that crosscut the southern and northern segments of the Loyalty system, are interpreted as due to the early effects of collision with the New Hebrides Arc. A NNW-SSE trend, evident along the whole Loyalty system and on the island of New Caledonia, is interpreted as an inherited structural trend that may have been reactivated through flexure of the Australian lithospheric plate at the subduction zone.Overall then, the morphology, structure and evolution of the southern and northern segments of the Loyalty system probably result from the combined effects of the Australian plate lithospheric bulge, the active Loyalty-New Hebrides collision and the overthrust of the New Caledonian ophiolite.     

The P-T-fO 2 stability of deerite,Fe 12 2+ Fe 6 3+ [Si12O40](OH)10

New equilibrium experiments have been performed in the 20–27 kbar range to determine the upper thermal stability limit of endmember deerite, Fe ₁₂ ²⁺ Fe ₆ ³⁺ [Si₁₂O₄₀](OH)₁₀. In this pressure range, the maximum thermal stability limit is represented by the oxygen-conserving reaction: deerite(De)=9 ferrosilite(Fs)+3 magnetite(Mag)+3 quartz(Qtz)+5 H₂O(W) (1). Under the oxygen fugacities of the Ni-NiO buffer the breakdown-reduction reaction: De=12 Fs+2 Mag+5 W+1/2 O₂ (10) takes place at lower temperatures (e.g. T=63° at 27 kbar). The experimental brackets can be fitted using thermodynamic data for ferrosilite, magnetite and quartz from Berman (1988) and the following 1 bar, 298 K data for deerite (per gfw): V^o=55.74 J.bar^-1, S^o=1670 J.K^-1, H _f ^o =-18334 kJ, =2.5x10^-5K^-1, =-0.18x10^-5 bar^-1. Using these data in conjunction with literature data on coesite, grunerite, minnesotaite, and greenalite, the P-T stability field of endmember deerite has been calculated for P _s=P _{H 2}O. This field is limited by 6 univariant oxygenconserving dehydration curves, from which three have positive dP/dT slopes, the other three negative slopes. The lower pressure end of the stability field of endmember deerite is thus located at an invariant point at 250±70°C and 10+-1.5 kbar. Deerite rich in the endmember can thus appear only in environments with geothermal gradients lower than 10°C/km and at pressures higher than about 10 kbar, which is in agreement with 4 out of 5 independent P-T estimates for known occurrences. The presence of such deerite places good constraints on minimum pressure and maximum temperature conditions. From log f _{O 2}-T diagrams constructed with the same data base at different pressures, it appears that endmember deerite is, at temperatures near those of its upper stability limit, stable only over a narrow range of oxygen fugacities within the magnetite field. With decreasing temperatures, deerite becomes stable towards slightly higher oxygen fugacities but reaches the hematite field only at temperatures more than 200°C lower than the upper stability limit. This practically precludes the coexistence deerite-hematite with near-endmember deerite in natural environments.     

Surface texture of Vesta from optical polarimetry

Polarimetric, photometric, and reflectance spectroscopic properties of asteroid 44 Vesta are simulated in the laboratory by a preparation of eucrite Bereba consisting oof a broad mixture of particle sizes (mainly greater than 50-μm) mixed and partially coated with particles of size 10 μm and less. Coarse grains are necessary for producing the same albedo and a very fine dust coating is necessary for producing the same polarization inversion angle as observed for Vesta. There are less small grains and fine dust in this sample than in lunar soils. Photometrically, if coating a sphere, this sample shows a constant brightness on the sunward half of the observed hemisphere, the brightness being given on the other half by the Minnaert reciprocity principle. With such a photometric behavior, the global geometric albedo and the sub-Earth point geometric albedo differ by no more than 5%. The microscopic phase coefficient β is 0.021 magnitude per degree for the sample; the larger value, β = 0.025, observed telescopically for Vesta indicates that large-scale roughness is present on this asteroid.     

Modelling weathering processes at the catchment scale: The WITCH numerical model

A numerical model of chemical weathering in soil horizons and underlying bedrock (WITCH) has been coupled to a numerical model of water and carbon cycles in forest ecosystems (ASPECTS) to simulate the concentration of major species within the soil horizons and the stream of the Strengbach granitic watershed, located in the Vosges Mountains (France). For the first time, simulations of solute concentrations in soil layers and in the catchment river have been performed on a seasonal basis. The model is able to reproduce the concentrations of most major species within the soil horizons, as well as catching the first-order seasonal fluctuations of aqueous calcium, magnesium and silica concentrations. However, the WITCH model underestimates concentrations of Mg²⁺ and silica at the spring of the catchment stream, and significantly underestimates Ca²⁺ concentration. The deficit in calculated calcium can be compensated for by dissolution of trace apatite disseminated in the bedrock. However, the resulting increased Ca²⁺ release yields important smectite precipitation in the deepest model layer (in contact with the bedrock) and subsequent removal of large amount of silica and magnesium from solution. In contrast, the model accurately accounts for the concentrations of major species (Ca, Mg and silica) measured in the catchment stream when precipitation of clay minerals is not allowed. The model underestimation of Mg²⁺ and H₄SiO₄ concentrations when precipitation of well crystallized smectites is allowed strongly suggests that precipitation of well crystallized clay minerals is overestimated and that more soluble poorly crystallized and amorphous materials may be forming. In agreement with observations on other watersheds draining granitic rocks, this study indicates that highly soluble trace calcic phases control the aqueous calcium budget in the Strengbach watershed.     

Fault zone geometry of a mature active normal fault: A potential high permeability channel (Pirgaki fault, Corinth rift, Greece)

We present results from petrophysical analysis of a normal fault zone with the aim of defining the flow pathways and their behavior during seismic and interseismic periods. Data are obtained on porosity geometry, strain structure and mineralogy of different domains of a normal fault zone in the Corinth rift. Data point out a close relationship between mineralogy of the clayey minerals, porosity network and strain structures and allow definition of a macroscopic anisotropy of the flow parameters with a strong control by microscopic ultracataclasite structures. The Pirgaki fault zone, developed within pelagic limestone, has a sharp asymmetric porosity profile, with a high porosity volume in the fault core and in the damage zone of the hanging wall. From porosity volumes and threshold measurements, a matrix permeability variation of 6 orders of magnitude could be expected between the protolith and the fault core. Modifications of this pathway during seismic and interseismic phases are depicted. Healing of cracks formed during seismic slip events occurred in the fault core zone and the porous network in the damage zone is sealed in a second step. The lens geometry of the fault core zone is associated with dissolution surfaces and open conduits where dissolved matter could move out of the fault core zone. These elementary processes are developed in particular along Riedel's structures and depend on the orientation of the strain surfaces relative to the local stress and depend also on the roughness of each surface type. P-surfaces are smooth and control shearing process. R-surfaces are rough and present two wavelengths of roughness. The long one controls localization of dissolution surfaces and conduits; the short one is characteristic of dissolution surfaces. The dissolved matter can precipitate in the open structures of the hanging wall damage zone, decreasing the connectivity of the macroscopic conduit developed within this part of the fault zone.