3D Structure of Arcade-Type Flares Derived from the Homologous Flare Series of 21, 24, and 27 February 1992

In February 1992, three flares, which we consider constitute a homologous flare series (flares having basically the same configuration repeating in the same situation), occurred in the active region NOAA 7070 and were observed by Yohkoh SXT. In the present paper, we first discuss the homology of these three flares, and derive the 3D structure by making use of the information obtained from the three different lines of sight at common phases. The result of this analysis made clear for the first time that the so-called `cusped arcade' at the maximum phase in the well-known 21 February 1992 flare is, contrary to the general belief, an `elongated arch' created at the beginning of the flare, seen with a shallow oblique angle. It is not the `flare arcade' seen on axis as widely conceived. This elongated arch roughly coincides with a diagonal of the main body of the soft X-ray arcade that came up later. The magnetic structure responsible for the flare as a whole turned out to be a structure with quadruple magnetic sources – with the third and fourth sources also playing essential roles. The observationally derived information in our paper provides strong restrictions to the theoretical models of the process occurring in arcade flares.     

Dynamical interpretation of the very hot region appearing at the top of the loop

In order to explain the appearance of a hard X-ray source at the top of a loop, we present a model in which the dynamical effects of the dark filament mass infallng along the loop in association with the “disparition brusque” plays an important role. The crash of the infalling mass produces high temperature regions in the low corona above the two footpoints of the loop, and the up-going shocks, created in the crash and strengthened in propagating upwards along the steep density gradient in the tail of the infalling mass, produce a very high temperature (10⁸ K) region upon colliding with each other near the top of the loop. Successive occurrence of this process in successively higher loops in magnetic arcade may account for the sources of gradual hard X-ray bursts appearing at the top of the loop-like structure.     

Excess heating of corona and chromosphere above magnetic regions by non-linear Alfvén waves

Excess heating of the active region solar atmosphere is interpreted by the decay of MHD slow-mode waves produced in the corona through the non-linear coupling of Alfvén waves supplied from subphotospheric layers. It is stressed that the Alfvén-mode waves may be very efficiently generated directly in the convection layer under the photosphere in magnetic regions, and that such magnetic regions, at the same time, provide the ‘transparent windows’ for Alfvén waves in regard to the Joule and frictional dissipations in the photospheric and subphotospheric layers. Though the Alfvén waves suffer considerable reflection in the chromosphere and in the transition layer, a certain fraction of this large flux is propagated out to the corona, and a large velocity amplitude exceeding the local Alfvén velocity is attained during the propagation along the magnetic tubes of force into a region of lower density and weaker magnetic field. The otherwise divergence-free velocity field in Alfvén waves gets involved in such a case with a compressional component (slow-mode waves) which again is of considerable velocity amplitude relative to the local acoustic velocity when estimated by using the formulation for non-linear coupling between MHD wave modes derived by Kaburaki and Uchida (1971). Therefore, the compressional waves thus produced through the non-linear coupling of Alvén waves will eventually be thermalized to provide a heat source. The introduction of this non-linear coupling process and the subsequent thermalization of thus produced slow-mode waves may provide means of converting the otherwise dissipation-free Alfvén mode energy into heat in the corona. The liberated heat will readily be redistributed by conduction along the magnetic lines of force, with higher density as a consequence of increased scale height, and thus the loop-like structure of the coronal condensations (or probably also the thread-like feature of the general corona) may be explained in a natural fashion.     

Star formation induced by supersonic turbulence in interstellar molecular cloud

We studied fragmentation process of the interstellar molecular cloud which is predominated by supersonic turbulence with special regard to collisions of turbulent gas elements and formation of a shock-compressed layer by receding shock waves. The propagation of the shock waves and the evolution of the compressed layer are followed by one-dimensional gas dynamical simulation until self-gravity becomes significant, taking account of the effects of thermal properties of the molecular gas and magnetic fields. It is shown that the efficient cooling by CO molecules and its sensitive dependence on gas density make the shock-compressed layer so cold and dense that the layer becomes gravitationally unstable and breaks into fragments even if the gas elements are gravitationally stable prior to the collision. The mass of the unstable fragment is estimated to be about two solar masses or less, irrespective of the presence of the magnetic field. The stars formed by collisions of supersonic turbulent gas elements accelerate the surrounding gas in T Tauri stage and replenish the turbulent energy to maintain the mechanical equilibrium of the molecular cloud.     

Failure process of masonry buildings during earthquake and associated casualty risk evaluation

Collapse of masonry structures during an earthquake is analyzed using the three-dimensional distinct element method (3D-DEM) code developed by the first author. The DEM is a numerical analysis technique, in which positions of elements are calculated by solving equations of motion step by step. Both individual and group behavior can be simulated. The structure is modeled as an assembly of distinct elements connected by virtual springs and dashpots, where elements come into contact. First, the validity of the developed 3D-DEM code is confirmed by comparing analytical results with static experimental results of masonry walls. Second, failure process of masonry buildings due to earthquake is investigated using DEM. Effects of reinforcing methods are also examined. Finally, injury to human bodies in the collapsing masonry buildings is also calculated. Assuming that occupants lie down on the floor, two types of casualty criteria are introduced and assessed.     

Disaster prevention,disaster preparedness and local community resilience within the context of disaster risk management in Cameroon

This paper presents a simulation of three components of near-field ground shaking recorded during the main shock at three stations of the September 16, 1978, Tabas (M _w = 7.4), Iran, earthquake, close to the causative fault. A hybrid method composed of a discrete wavenumber method developed by Bouchon (Bouchon in Bull Seismol Soc Am 71:959–971, 1981; Cotton and Coutant in Geophys J Int 128:676–688, 1997) and a stochastic finite-fault modeling based on a dynamic corner frequency proposed by Motazedian and Atkinson (Bull Seismol Soc Am 95:995–1010, 2005), modified by Assatourians and Atkinson (Bull Seismol Soc Am 97:935–1949, 2007), is used for generating the seismograms at low (0.1–1.0 Hz) and high frequencies (1.0–20.0 Hz), respectively. The results are validated by comparing the simulated peak acceleration, peak velocity, peak displacement, Arias intensity, the integral of velocity squared, Fourier spectrum and acceleration response spectrum on a frequency-by-frequency basis, the shape of the normalized integrals of acceleration and velocity squared, and the cross-correlation with the observed time-series data. Each characteristic is compared on a scale from 0 to 10, with 10 being perfect agreement. Also, the results are validated by comparing the simulated ground motions with the modified Mercalli intensity observations reported by reconnaissance teams and showed reasonable agreement. The results of the present study imply that the damage distribution pattern of the 1978 Tabas earthquake can be explained by the source directivity effect.     

青藏高原唐古拉山口冰川、水文和气候学观测20a:意义与贡献

1989年中日联合青藏高原冰川考察在唐古拉山口开始进行冰川、水文气候学观测,距今已经整整20 a.时过境迁,合作双方的研究所均已重组、更名,然而1989-1993年间考察研究所起到的开创性作用、当时取得成果至今仍具有重要科学意义.而且当时建立的一些观测站点,借助一些大型课题,如GAME/Tibet、国家自然科学基金重点项目和国家重点基础研究发展计划(973计划)项目的支持一直持续工作至今.最近,完善了位于冬克玛底冰川末端的冰川监测系统,将对该地区的冰冻圈和气候环境变化研究做出更多的贡献.     

Experimental and numerical study on the fracture of rocks during injection of CO<Subscript>2</Subscript>-saturated water

Geological sequestration of CO₂ into depleted hydrocarbon reserviors or saline aquifers presents the enormous potential to reduce greenhouse gas emission from fossil fuels. However, it may give rise to a complicated coupling physical and chemical process. One of the processes is the hydro-mechanical impact of CO₂ injection. During the injection project, the increase of pore pressures of storing formations can induce the instability, which finally results in a catastrophic failure of disposal sites. This paper focuses mainly on the role of CO₂-saturated water in the fracturing behavior of rocks. To investigate how much the dissolved CO₂ can influence the pore pressure change of rocks, acoustic emission (AE) experiments were performed on sandstone and granite samples under triaxial conditions. The main innovation of this paper is to propose a time dependent porosity method to simulate the abrupt failure process, which is observed in the laboratory and induced by the pore pressure change due to the volume dilatancy of rocks, using a finite element scheme associated with two-phase characteristics. The results successfully explained the phenomena obtained in the physical experiments.     

Behavior of the flare-produced coronal MHD wavefront and the occurrence of type II radio bursts

The propagation of the weak MHD fast-mode shock emitted into the corona by flares at their explosive phase is computer-simulated. It is shown as the result that the shock wave is refracted towards the low Alfvén velocity regions pre-existing in the corona, and the strength of the shock, which is otherwise weak, is drastically enhanced on encountering low- V _A regions due to the focussing effect by refraction and also due to the lowered propagation velocity of the shock in such regions. It is expected that electron acceleration takes place in such a drastic strengthening of the shock, leading to the local excitation of plasma waves and eventually to the occurrence of radio bursts at such locations. Such locations of shock strength enhancement, when computed by using HAO realistic models of coronal density and magnetic field of the day of certain type II burst events, actually coincide roughly with the observed positions of type II bursts. Peculiar configurations of type II burst sources as well as their occurrence even beyond the horizon of the responsible flare are explained consistently by the large scale refraction and the local enhancement of the shock due to the global and local distribution of Alfvén velocity in the corona. A unified interpretation is given for the occurrence of type II bursts and Moreton's wave phenomena, and also the relation of our MHD fast-mode disturbance with other flare-associated dynamical phenomena is discussed.     

Flare-produced coronal MHD-fast-mode wavefronts and Moreton's wave phenomenon

The propagation characteristics of MHD fast-mode disturbances, which can emanate from flare regions, are computed for realistic conditions of the solar corona at the times of particular flares. The path of a fast-mode disturbance is determined by the large-scale (global) coronal distributions of magnetic field and density, and can be computed by a general raytracing procedure (eikonal equation) adapted to MHD. We use the coronal (electron) density distribution calculated from daily K-coronameter data, and the coronal magnetic field calculated under the current-free approximation from magnetograph measurements of the photospheric magnetic field. We compare the path and time-development of an MHD fast-mode wavefront emitted from the flare region (as calculated from a realistic model corona for the day of the observed Moreton wave event) with actual observations of the Moreton wave event, and find that the Moreton wave can be identified with the rapidly moving intersection of the coronal fast-mode wavefront and the chromosphere (as hypothesized in our previous paper); the directivity (anisotropic propagation), as well as other characteristics of the propagation of the Moreton wave can be successfully explained.sponsored by the National Science Foundation.