Numerical experiments on wind-driven circulations and associated transport processes in Suruga Bay

The dynamics of the wind-driven circulations and surface transport processes in Suruga Bay have been examined by performing numerical experiments. While strong winds exist outside the bay, the winds inside the bays are greatly reduced, which generates a strong wind stress curl in winter and autumn. In particular, in winter, a strong positive curl region is located across the bay mouth, and a strong surface circulation with counterclockwise rotation is generated beneath it. The circulation is nearly geostrophic, but is not affected by the bottom topography in the deep bay. It is suggested that intense surface water exchange through the bay mouth occurs in winter, whereas it is not active in the other seasons when no significant vorticity is supplied on the bay mouth from the atmosphere. Moreover, we propose a hypothesis that the atmospheric wind stress curl will cause the frequent appearance of the counterclockwise circulation in winter in the real ocean.     

Development of a Multi-Layer Urban Canopy Model for the Analysis of Energy Consumption in a Big City: Structure of the Urban Canopy Model and its Basic Performance

A multilayer one-dimensional canopy model was developed to analyze the relationship between urban warming and the increase in energy consumption in a big city. The canopy model, which consists of one-dimensional diffusion equations with a drag force, has three major parameters: building width, distance between buildings, and vertical floor density distribution, which is the distribution of a ratio of the number of the buildings that are taller than some level to all the buildings in the area under consideration. In addition, a simplified radiative process in the canopy is introduced. Both the drag force of the buildings and the radiative process depend on the floor density distribution. The thermal characteristics of an urban canopy including the effects of anthropogenic heat are very complicated. Therefore, the focus of this research is mainly on the basic performance of an urban canopy without anthropogenic heat. First, the basic thermal characteristics of the urban canopy alone were investigated. The canopy model was then connected with a three-dimensional mesoscale meteorological model, and on-line calculations were performed for 10 and 11 August, 2002 in Tokyo, Japan. The temperature near the ground surface at the bottom of the canopy was considerably improved by the calculation with the canopy model. However, a small difference remained between the calculation and the observation for minimum temperature. Deceleration of the wind was well reproduced for the velocity at the top of the building by the calculation with the canopy model, in which the floor density distribution was considered.     

中国东南部与日本中—新生代构造-岩浆作用对比研究

重点讨论了中国东南部和日本中、新生代火成岩的时空分布及其构造环境,总结了两者的异同性。印支期和燕山早期（190～170Ma）中国东南部和日本具有不同的岩浆活动演化史。在165～150Ma期间,中国东南部广泛分布有过铝和弱过铝的S型花岗岩,而170～130Ma则为日本岩浆活动沉寂期。燕山晚期,中国东南部和日本都发生大规模的火山-侵入活动,同是库拉-太平洋板块向欧亚大陆俯冲-碰撞及其后伸展-裂解的产物,日本开始时代晚（130Ma）,并一直持续到始新世（45Ma）。进入喜马拉雅期,在日本海打开之前（>15Ma）,中国东南部和日本同处于大陆伸展构造环境,在日本海打开之后（<15Ma）,中国东南部和日本进入完全不同的构造演化阶段。     

电阻率/激发极化率数据的二维反演程序

本程序在目前日本流行的电阻率／激发极化法二维反演程序［４］基础上,将电导率和极化率分块均匀变为分块连续变化,并在目标函数中加入了更多的先验信息,使反演结果的唯一性和真实性大大增加。在有限元正演模拟中,又采用三角单元剖分,使实测数据在反演以前不需要进行地形改正。本文介绍了该方法的基本原理和程序的使用方法,并给出了几个理论算例和野外实例     

Identification of the source caldera for the Middle Miocene ash-flow tuffs in the Kii Peninsula based on apatite trace-element composition

A large caldera cluster consisting of at least four calderas (Omine, Odai, Kumano-North and Kumano calderas) existed in the central–southern part of the Kii Peninsula approximately 14–15 Ma. On the other hand, thick Middle Miocene ash-flow tuffs, referred to as the Muro Ash-flow Tuff and the Sekibutsu Tuff Member, are distributed in the northern part of the Kii Peninsula. Although these tuffs are considered to have erupted from the caldera cluster in the central-southern Kii Peninsula, identifying the source caldera in the cluster has been controversial because of similarities in the petrological characteristics and identical radiometric ages of the volcaniclastic rocks of these calderas. We successfully discriminated the characteristics of the eruptive products of each caldera in the caldera cluster based on the apatite trace-element compositions of the pyroclastic dikes and ash-flow tuffs of the calderas. We also demonstrated that the source caldera of at least the lower main part of the Muro Ash-flow Tuff and the Sekibutsu Tuff Member was the Odai Caldera, which is located in the central Kii Peninsula. Our findings show possible correlations among the pyroclastic conduits and ash-flow tuffs of the caldera-fill and/or outflow deposits, even in cases where they have been densely welded and diagenetically altered. This method is useful for the study of deeply eroded ancient calderas.     

X-ray CT based numerical analysis of fracture flow for core samples under various confining pressures

The X-ray CT based numerical analysis of fracture flow for core samples, recently developed by the authors, was applied to two granite core samples having either a mated artificial or a mated natural fracture at confining pressures of 5 to 50 MPa. A third-generation medical X-ray CT scanner was used to image the samples within a core holder consisting of an aluminum liner and a carbon fiber overwrap. Fracture models (i.e., aperture distributions) were obtained by the CT images, the resolution of which was coarser than the apertures, and a single-phase flow simulation was performed using a local cubic law-based fracture flow model. Numerical results were evaluated by a fracture porosity measurement and a solution displacement experiment using NaCl and NaI aqueous solutions. These numerical results coincided only qualitatively with the experimental results, primarily due to image noise from the aluminum liner of the core holder. Nevertheless, the numerical results revealed flow paths within the fractures and their changes with confining pressure, whereas the experimental results did not provide such results. Different stress-dependencies in the flow paths were observed between the two samples despite the similar stress-dependency in fracture porosity and permeability. The changes in total area of the flow paths with confining pressure coincided qualitatively with changes in breakthrough points in the solution displacement experiment. Although the data is limited, the results of the present study suggest the importance of analyzing fluid flows within naturally fractured core samples under in situ conditions in order to better understand the fracture flow characteristics in a specific field. As demonstrated herein, X-ray CT-based numerical analysis is effective for addressing this concern. Using a multi-phase flow model, as well as a core holder constructed of an engineered plastic, should provide a useful, non-destructive, and non-contaminative X-ray CT-based fracture flow analysis for core samples under in situ conditions in future studies.     

Application of chemical tracers to an estimate of benthic denitrification in the Okhotsk Sea

To estimate benthic denitrification in a marginal sea, we assessed the usefulness of \({\text{N}}_{2}^{*}\) , a new tracer to measure the excess nitrogen gas (N₂) using dissolved N₂ and argon (Ar) with N* in the intermediate layer (26.6–27.4σ _θ ) of the Okhotsk Sea. The examined parameters capable of affecting \({\text{N}}_{2}^{*}\) are denitrification, air injection and rapid cooling. We investigated the relative proportions of these effects on \({\text{N}}_{2}^{*}\) using multiple linear regression analysis. The best model included two examined parameters of denitrification and air injection based on the Akaike information criterion as a measure of the model fit to data. More than 80 % of \({\text{N}}_{2}^{*}\) was derived from the denitrification, followed by air injection. Denitrification over the Okhotsk Sea shelf region was estimated to be 5.6 ± 2.4 μmol kg^?1. The distribution of \({\text{N}}_{2}^{*}\) was correlated with potential temperature (θ) between 26.6 and 27.4σ _θ (r = ?0.55). Therefore, we concluded that \({\text{N}}_{2}^{*}\) and N* can act complementarily as a quasi-conservative tracer of benthic denitrification in the Okhotsk Sea. Our findings suggest that \({\text{N}}_{2}^{*}\) in combination with N* is a useful chemical tracer to estimate benthic denitrification in a marginal sea.     

Long-term (36-year) observations on the dynamics of the fish-killing raphidophyte Chattonella in Harima-Nada,eastern Seto Inland Sea,Japan

Long-term changes of the fish-killing raphidophyte Chattonella spp. (Chattonella antiqua, Chattonella marina and Chattonella ovata) were examined in relation to environmental factors at 19 sampling stations in Harima-Nada, eastern Seto Inland Sea, Japan, for 36 years from 1973 to 2008. Long-term trends in the dynamics of Chattonella populations were considered to relate to environmental factors such as nutrient concentrations and water temperature. High nutrient levels during the period from the 1970s to the early 1980s have contributed to the high cell density and large-scale red tides of Chattonella spp. in Harima-Nada. However, nutrient levels exhibited a decreasing trend thereafter, and it is thought that Chattonella spp. cannot form large-scale blooms under the present conditions. After the mid-1990s, the occurrence period of vegetative cells of Chattonella spp. has been several weeks or 1 month earlier than that of the 1970s and early 1980s, and the appearance frequency of Chattonella spp. has increased in the northern coastal area, although the cell density and the spatial scale of the distribution have become lower and smaller than those in the previous decades. It is suggested that the timing of germination of Chattonella cysts has become earlier as a result of the increase in water temperature, and the chances of vegetative growth have also increased, especially at the northern coast where most of large rivers discharge into the Harima-Nada. In addition, the present results revealed that fewer diatoms were also one of the significant factors for the high abundance of Chattonella spp. in Harima-Nada.     

Soft X-ray observation of a large-scale coronal wave and its exciter

Recent extreme ultraviolet (EUV) observations from SOHO have shown the common occurrence of flare-associated global coronal waves strongly correlated with metric type II bursts, and in some cases with chromospheric Moreton waves. Until now, however, few direct soft X-ray detections of related global coronal waves have been reported. We have studied Yohkoh Soft X-ray Telescope (SXT) imaging observations to understand this apparent discrepancy, and describe the problems in this paper. We have found good X-ray evidence for a large-scale coronal wave associated with a major flare on 6 May 1998. The earliest direct trace of the wave motion on 6 May consisted of an expanding volume within 20 Mm (projected) of the flare-core loops, as established by loop motions and a dimming signature. Wavefront analyses of the soft X-ray observations point to this region as the source of the wave, which began at the time of an early hard X-ray spike in the impulsive phase of the flare. The emission can be seen out to a large radial distance (some 220 Mm from the flare core) by SXT, and a similar structure at a still greater distance by EIT (the Extreme Ultraviolet Imaging Telescope) on SOHO. The radio dynamic spectra confirm that an associated disturbance started at a relatively high density, consistent with the X-ray observations, prior to the metric type II burst emission onset. The wavefront tilted away from the vertical as expected from refraction if the Alfvén speed increases with height in the corona. From the X-ray observations we estimate that the electron temperature in the wave, at a distance of 120 Mm from the flare core, was on the order of 2–4 MK, consistent with a Mach number in the range 1.1–1.3. Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1022904125479 deceased