Correlating mass physical properties with ALOS reflectance spectra for intertidal sediments from the Ba Lat Estuary (northern Vietnam): an exploratory laboratory study

Characterization of the sediment composition of tidal flats and monitoring of their spatiotemporal changes has become an important part of the sustainable management of coastal environments. To accurately classify sediments through remote sensing, a comprehensive understanding of sediment reflectance spectra is indispensable. The present laboratory-based study explores the performance of the high spatial resolution (10?×?10 m) Advanced Land Observing Satellite (ALOS) launched in 2006. Relationships between reflectance spectra (bands 1 to 4) and four typical mass physical properties were investigated under wet and dry experimental conditions for intertidal sediments sampled near the Ba Lat Estuary in northern Vietnam. Reflectance in the near-infrared region corresponding to ALOS band 4 (0.76–0.89 μm) was found (1) to have a strong negative correlation with sand content (dry wt%) under both wet and dry conditions (linear correlation coefficient r?=?–0.7859 and –0.8094, respectively), (2) to increase with decreasing relative water content (%) in a given sediment type (r?=?–0.7748 to –0.9367 for mud, sandy mud, muddy sand, and sand), (3) to have a positive correlation with organic matter content (r?=?0.7610 and 0.6460 under wet and dry conditions for contents >0.20 dry wt%), and (4) to be insignificantly correlated with mineral composition assessed in terms of contents (wt%) of quartz, clay minerals, and mica group minerals. Positive relationships between reflectance and water content for the pooled data of all sediment types (r?=?0.6395) or organic matter content contrast with previous findings, and can be attributed to close interrelationships between these properties and the predominance of sand content as controlling factor of reflectance. This study clarifies that ALOS band 4 provides the most useful imagery for intertidal monitoring because its reflectance, as simulated using the laboratory data, shows the strongest correlation with sand content. In a next step, these experimental findings should be verified by identifying the reflectance relationships at satellite image scales, and also considering the effects of other tidal flat features on reflectance, such as microtopography and biological surface characteristics.     

Ionospheric and geomagnetic disturbances during the 2005 Sumatran earthquakes

This paper investigates the ionospheric and geomagnetic responses during the 28 March 2005 and 14 May 2005 Sumatran earthquakes using GPS and magnetometer stations located in the near zone of the epicenters. These events occurred during low solar and geomagnetic activity. TEC oscillations with periods of 5–10 min were observed about 10–24 min after the earthquakes and have horizontal propagation velocities of 922–1259 m/s. Ionospheric disturbances were observed at GPS stations located to the northeast of the epicenters, while no significant disturbances were seen relatively east and south of the epicenters. The magnetic field measurements show rapid fluctuations of 4–5 s shortly after the earthquake, followed by a Pc5 pulsation of 4.8 min about 11 min after the event. The correlation between the ionospheric and geomagnetic responses shows a good agreement in the period and time lag of the peak disturbance arrival, i.e. about 11–13 min after the earthquake.     

Factors influencing the recession rate of Niagara Falls since the 19th century

The rate of recession of Niagara Falls (Horseshoe and American Falls) in northeastern North America has been documented since the 19th century; it shows a decreasing trend from ca. 1 m y^− 1 a century ago to ca. 0.1 m y^− 1 at present. Reduction of the flow volume in the Niagara River due to diversion into bypassing hydroelectric schemes has often been taken to be the factor responsible, but other factors such as changes in the waterfall shape could play a role and call for a quantitative study. Here, we examine the effect of physical factors on the historically varying recession rates of Niagara Falls, using an empirical equation which has previously been proposed based on a non-dimensional multiparametric model which incorporates flow volume, waterfall shape and bedrock strength. The changes in recession rates of Niagara Falls in the last century are successfully modeled by this empirical equation; these changes are caused by variations in flow volume and lip length. This result supports the validity of the empirical equation for waterfalls in rivers carrying little transported sediment. Our analysis also suggests that the decrease in the recession rate of Horseshoe Falls is related to both artificial reduction in river discharge and natural increase in waterfall lip length, whereas that of American Falls is solely due to the reduction in flow volume.     

In situ Measurements of Tide Gauge Response and Corrections of Tsunami Waveforms from the Niigataken Chuetsu-oki Earthquake in 2007

Linear and nonlinear responses of ten well-type tide gauge stations on the Japan Sea coast of central Japan were estimated by in situ measurements. We poured water into the well or drained water from the well by using a pump to make an artificial water level difference between the outer sea and the well, then measured the recovery of water level in the well. At three tide gauge stations, Awashima, Iwafune, and Himekawa, the sea-level change of the outer sea is transmitted to the tide well instantaneously. However, at seven tide gauge stations, Nezugaseki, Ryotsu, Ogi, Teradomari, Banjin, Kujiranami, and Naoetsu, the sea-level change of the outer sea is not always transmitted to the tide well instantaneously. At these stations, the recorded tsunami waveforms are not assured to follow the actual tsunami waveforms. Tsunami waveforms from the Niigataken Chuetsu-oki Earthquake in 2007 recorded at these stations were corrected by using the measured tide gauge responses. The corrected amplitudes of the first and second waves were larger than the uncorrected ones, and the corrected peaks are a few minutes earlier than the uncorrected ones at Banjin, Kujiranami, and Ogi. At Banjin, the correction was significant; the corrected amplitudes of the first and second upward motion are +103 cm and +114 cm, respectively, while the uncorrected amplitudes were +96 cm and +88 cm. At other tide gauge stations, the differences between the uncorrected and corrected tsunami waveforms were insignificant.     

Properties of winter mixed layer variability on the shelf-slope region facing the Kuroshio—study of Tosa Bay, southern Japan

To examine the properties of winter mixed layer (ML) variability in the shelf-slope waters facing the Kuroshio, we analyzed historical temperature records and the simulated results of a triply nested high-resolution numerical model. As a candidate of the shelf-slope waters, we focused on Tosa Bay, off the southern Japan. A time series of observed monthly mean ML temperatures and depths in the bay exhibits a remarkable seasonal variation. The period when the ML develops can be divided into two regimes: from September to November, when the sea surface cooling is gradually enhanced, the ML temperature and depth decreases and increases, respectively; from January to March, the ML temperature and depth are kept nearly constant, while the sea surface cooling in January reaches its annual maximum. In the latter regime, variance for the monthly mean ML depth is the largest of the year. To further study the ML properties in the latter regime corresponding to winter, we examined simulated results. It was found that the largest variance for ML depth is attributed to a dominant intramonthly variation. This is related to a submesoscale variation with typical spatial scales of 10–20 km, induced by the Kuroshio and its frontal disturbances. Simulated monthly mean heat balance within the ML showed that heat advection balances with heat flux at the sea surface and entrainment through the ML bottom. Moreover, the monthly mean heat advection is determined mainly by the intramonthly eddy heat advection, suggesting that the high-frequency intramonthly variation related to submesoscale variations contributes significantly to the low-frequency monthly variations of the ML in winter.     

Utilization of laser range finder and differential GPS for high‐resolution topographic measurement at Hacituğrul Tepe,Turkey

Topographic maps are fundamental for geoarchaeological field studies and archaeological excavations. However, traditional methods of topographic mapping, as well as modern high‐tech methods such as airborne laser scanning and photogrammetry of high‐resolution satellite images, are often cost‐ineffective for field studies in terms of time, money, and labor. We here propose a method to measure topography for archaeological sites and surrounding areas quickly and accurately, using a laser range finder (LRF) and differential global positioning system DGPS. Three‐dimensional coordinates of points on land surfaces are measured through the LRF, targeted from multiple measuring locations whose positions are acquired with the DGPS. The point data are then interpolated to produce a digital elevation model (DEM) using a geographic information system (GIS). High‐resolution DEMs can be obtained with this method, with horizontal and vertical accuracies on the order of 10 cm. We here demonstrate the method for measuring detailed topography of the Hacituğrul Tepe in central Turkey. Digital topography data incorporated in GIS can also be part of an archaeological database, providing opportunities for quantitative analyses of topography and archaeological materials. © 2009 Wiley Periodicals, Inc.     

Geotechnical sealing material for coastal disposal facility for soils and wastes contaminated by radioactive cesium

Safe disposal of wastes produced due to the process of decontamination in and around Fukushima No. 1 nuclear power plant is an urgent requirement. The purpose of this study was to develop a sealing material which can be used as an engineered barrier for a final disposal facility for the soils and wastes contaminated by radioactive cesium. The analyses conducted based on 4-m-thick sealing layer revealed that the hydraulic conductivity of the sealing material needs to be kept below 5.0?×?10^?10?m/s to avoid the seepage of contaminants below the environmentally safe limits. Sealing material was developed using marine clay–bentonite mixture and the engineering characteristics were examined. The results of laboratory experiments showed that, with the addition of bentonite, the hydraulic conductivity equal to or less than 5.0?×?10^?10?m/s was achieved when the effective consolidation stress is equal to or more than 27?kPa. From the tests for adsorption properties for cesium, it was found that the sealing material showed the significant capacity of adsorption for cesium in seawater. It was concluded that the construction of waste disposal facility on the sandy seafloor is feasible using the sealing layer proposed in this study.     

Spatial Modeling Techniques for Characterizing Geomaterials:Deterministic vs.Stochastic Modeling for Single-Variable and Multivariate Analyses

Sample data in the Earth and environmental sciences are limited in quantity and sampling location and therefore, sophisticated spatial modeling techniques are indispensable for accurate imaging of complicated structures and properties of geomaterials. This paper presents several effective methods that are grouped into two categories depending on the nature of regionalized data used. Type I data originate from plural populations and type II data satisfy the prerequisite of stationarity and have distinct spatial correlations. For the type I data, three methods are shown to be effective and demonstrated to produce plausible results: (1) a spline-based method, (2) a combination of a spline-based method with a stochastic simulation, and (3) a neural network method. Geostatistics proves to be a powerful tool for type II data. Three new approaches of geostatistics are presented with case studies: an application to directional data such as fracture, multi-scale modeling that incorporates a scaling law, and space-time joint analysis for multivariate data. Methods for improving the contribution of such spatial modeling to Earth and environmental sciences are also discussed and future important problems to be solved are summarized.      

Radon concentrations in soil gas,considering radioactive equilibrium conditions with application to estimating fault-zone geometry

A calculation method for determining the amount of Rn isotopes and daughter products at the start of measurement (CRAS) is proposed as a more accurate means of estimating the initial Rn concentration in soil gas. The CRAS utilizes the decay law between ²²²Rn and ²²⁰Rn isotopes and the daughter products ²¹⁸Po and ²¹⁶Po, and is applicable to α-scintillation counter measurements. As Rn is both inert and chemically stable, it is useful for fault investigation based on the soil gas geochemistry. However, the total number of α particles emitted by the decay of Rn has generally been considered to be proportional to the initial Rn concentration, without considering the gas condition with respect to radioactive equilibrium. The CRAS method is shown to be effective to derive Rn concentration for soil gases under both nonequilibrium conditions, in which the total number of decays increases with time, and equilibrium conditions, which are typical of normal soil under low gas flux. The CRAS method in conjunction with finite difference method simulation is applied to the analysis of two active fault areas in Japan, and it is demonstrated that this combination could detect the sharp rises in ²²²Rn concentrations associated with faults. The method also allows the determination of fault geometry near the surface based on the asymmetry variation of the Rn concentration distribution when coupled with a numerical simulation of ²²²Rn transport. The results for the new method as applied to the two case studies are consistent with the data collected from the geological survey. It implies that the CRAS method is suitable for investigating the fault system and interstitial gas mobility through fractures. The present analyses have also demonstrated that high Rn concentrations require the recent and repeated accumulation of ²²²Rn parents (²³⁰Th and ²²⁶Ra) in fault gouges through deep gas release during fault movement.