A grid-based tropospheric product for China using a GNSS network

Tropospheric delay accounts for one source of error in global navigation satellite systems (GNSS). To better characterize the tropospheric delays in the temporal and spatial domain and facilitate the safety-critical use of GNSS across China, a method is proposed to generate a grid-based tropospheric product (GTP) using the GNSS network with an empirical tropospheric model, known as IGGtrop. The prototype system generates the GTPs in post-processing and real-time modes and is based on the undifferenced and uncombined precise point positioning (UU-PPP) technique. GTPs are constructed for a grid form (\(2.0{^{\circ }}\times 2.5{^{\circ }}\) latitude–longitude) over China with a time resolution of 5 min. The real-time GTP messages are encoded in a self-defined RTCM3 format and broadcast to users using NTRIP (networked transport of RTCM via internet protocol), which enables efficient and safe transmission to real-time users. Our approach for GTP generation consists of three sequential steps. In the first step, GNSS-derived zenith tropospheric delays (ZTDs) for a network of GNSS stations are estimated using UU-PPP. In the second step, vertical adjustments for the GNSS-derived ZTDs are applied to address the height differences between the GNSS stations and grid points. The ZTD height corrections are provided by the IGGtrop model. Finally, an inverse distance weighting method is used to interpolate the GNSS-derived ZTDs from the surrounding GNSS stations to the location of the grid point. A total of 210 global positioning system (GPS) stations from the crustal movement observation network of China are used to generate the GTPs in both post-processing and real-time modes. The accuracies of the GTPs are assessed against with ERA-Interim-derived ZTDs and the GPS-derived ZTDs at 12 test GPS stations, respectively. The results show that the post-processing and real-time GTPs can provide the ZTDs with accuracies of 1.4 and 1.8 cm, respectively. We also apply the GTPs in real-time kinematic GPS PPP, and the results show that the convergence time of the PPP solutions is shortened. These results confirm that the GTPs can act as an efficient information source to augment GNSS positioning over China.     

一种状态区间取值修正的灰色-马尔科夫链预测模型研究

提出了一种对灰色-马尔科夫链预测模型的状态区间取值修正方法.考虑实测值在状态区间中的位置分布情况作为先验知识,对状态区间的端点重新定权,修正预测值在状态区间中的取值,从而获得更高精度的预测结果.结合某建筑物的实测沉降数据,与原始GM(1,1)、残差修正G M(1,1)、灰色-马尔科夫链预测模型进行对比,结果表明:本文预...     

无人机摄影测量与RTK在水运工程中应用研究

无人机摄影测量技术具有快速灵活、实时高效等特点,逐渐成为空间信息获取的重要技术手段。本文设计了实用的水运工程空间数据无人机作业流程,并将RTK辅助于无人机飞行过程提高数据获取精度,通过航摄影像快速处理提高其获取效率。通过在水运工程中的实验和应用,验证了该技术方法的可行性,为水运工程提供新的空间数据获取技术方法和手段。     

结合引力场理论的道路自动选取方法

针对复杂网络模型被广泛应用于道路选取的研究中,少有方法顾及道路网对偶图中多级邻居节点的影响,导致对道路的重要性评价缺乏准确性和可靠性的问题。该文将道路网对偶图节点的结构特征值视作质量,将节点间的最短距离视作距离,结合引力场方程实现道路自动选取,较好地将道路网对偶图中多级邻居节点的影响纳入到道路重要性的计算中,从而实现对道路重要性的准确评估。通过对兰州市城关区的路网进行实验,结果表明本文方法所选取的路网较好地保持了原始道路网的整体结构、覆盖范围、密度分布、拓扑特征和连通性。     

航空重力测量的空中数据处理与分析

针对航空重力测量的原始扰动数据,本文介绍了数据处理的一般流程,内容包括原始数据检查、零点漂移校正、平均高程面归算、交叉点搜寻、内符合精度评价、离散数据的格网化等方面,详细说明了每一步数据处理的理论模型,并通过工程实例对计算结果进行了讨论和分析,为今后开展大规模航空重力测量业务作出一定的尝试和探索.     

轻小型惯性稳定平台位置环协同通信控制方法

针对轻小型航空遥感系统对姿态大机动的快响应需求,设计了一种轻量型惯性稳定平台位置环协同通信与姿态超限快响应控制策略,将位置环反馈回路设计为两种可切换工作模式。伺服模式下,参考位置姿态系统的输出,通过设计二者协同通信,保证稳定平台对飞行姿态及扰动的实时隔离;编码器实时监测框架间相对角位置,超限位且载荷视轴与垂直方向误差较大时切换模式。超限快速回复模式下,以编码器值为位置环反馈量,使用大增益将平台由超限位置迅速调整到最大限定位置,并实时监测POS值,在载荷视轴位置误差较小时返回伺服模式。实验表明,该方法可靠、有效实现了稳定平台与位置传感器的高精度实时通信与控制。     

多媒体地理信息系统的网络结构分析

数据模型是GIS的灵魂和关键,为了使开发出的GIS尽可能准确地反映地理空间,能够较好地满足GIS用户各方面的需要,而网络拓扑对网络的构成也至关重要,本文分析和总结了早期和近期GIS几种数据模型的优缺点,并在此基础上提出了整体GIS数据模型及网络设计的几种常见模式.     

Assessing Similarity of Geographic Processes and Events

The increased availability of spatiotemporal data collected from satellite imagery and other remote sensors provides opportunities for enhanced analysis of geographic phenomena. Much of the new data includes regular snapshots of the environment. Comparison of these snapshots can provide information about changes to the phenomena of interest. However, conventional GIS data models and analytical tools lack capabilities to adequately handle massive multidimensional data. One of the fundamental tools necessary to meet such challenges is query support to retrieve and summarize data according to dynamic geographic phenomena, such as geographic events and processes, of interest. Such query support depends upon abilities to assess spatiotemporal similarity so that data representing geographic events that exhibit the spatiotemporal characteristics of interest can be identified in a GIS database. To this end, this paper introduces a method to assess similarity of geographic events and processes (such as storms) based on their spatiotemporal characteristics (such as distribution of precipitation). We developed six indices to capture static and dynamic characteristics of geographic events and applied the Dynamic Time Warping method to temporal sequences of the six indices to examine the similarity among these events. With a case study, we demonstrated the proposed indices and method capable of comparing spatiotemporal characteristics of events as recorded in a GIS database and categorizing spatiotemporal data into groups of events according to their behavior in space and time.     

多时相Radarsat数据在广东肇庆地区稻田分类中的应用

将1996年获取的4个时相的Radarsat图像用于广东肇庆地区的稻田分类试验,结果表明,多时相Radarsat数据对水稻类型的识别精度较高,而且稻田的轮作规律容易推测出来。本文系统地介绍了这一试验研究的最新进展,探讨了神经网络分类方法在SAR图像处理中的应用潜力和Radarsat数据在中国南方水稻监测中的最佳时相选择和有效分辨率问题。     

航空遥感稳定平台的模型参考自适应控制

针对航空遥感惯性稳定平台中所受到的不平衡力矩等所引起的成像载荷不稳定导致无法获取高分辨率遥感数据的问题,提出了在平台控制系统中应用基于模型参考的自适应比例-积分-微分控制方法。根据需求设计出参考模型,将参考系统输出与实际系统输出之间的误差输入到自适应PID调节器,实时调整PID参数,对误差进行实时校正,以达到抑制不平衡力矩扰动、提高稳定平台稳定精度的目的。对所提出的模型参考自适应控制方法进行了仿真验证,结果表明:相对传统PID方法,模型参考自适应控制器对偏心力矩等主要干扰具有很好的抑制作用,系统输出能够很好地跟踪姿态变化,系统稳定精度得到显著提高。