Climate variability in the Spanish Pyrenees during the last 30,000 yr revealed by the El Portalet sequence

Palynological, sedimentological and stable isotopic analyses of carbonates and organic matter performed on the El Portalet sequence (1802 m a.s.l., 42°48′00?N, 0°23′52?W) reflect the paleoclimatic evolution and vegetation history in the central-western Spanish Pyrenees over the last 30,000 yr, and provide a high-resolution record for the late glacial period. Our results confirm previous observations that deglaciation occurred earlier in the Pyrenees than in northern European and Alpine sites and point to a glacial readvance from 22,500 to 18,000 cal yr BP, coinciding with the global last glacial maximum. The patterns shown by the new, high-resolution pollen data from this continental sequence, chronologically constrained by 13 AMS ¹⁴C dates, seem to correlate with the rapid climate changes recorded in Greenland ice cores during the last glacial-interglacial transition. Abrupt events observed in northern latitudes (Heinrich events 3 to 1, Oldest and Older Dryas stades, Intra-Allerød Cold Period, and 8200 cal yr BP event) were also identified for the first time in a lacustrine sequence from the central-western Pyrenees as cold and arid periods. The coherent response of the vegetation and the lake system to abrupt climate changes implies an efficient translation of climate variability from the North Atlantic to mid latitudes.     

Late Holocene sea-level changes and isostasy in western Denmark

Cores and exposed cliff sections in salt marshes around Ho Bugt, a tidal embayment in the northernmost part of the Danish Wadden Sea, were subjected to ¹⁴C dating and litho- and biostratigraphical analyses to reconstruct paleoenvironmental changes and to establish a late Holocene relative sea-level history. Four stages in the late Holocene development of Ho Bugt can be identified: (1) groundwater-table rise and growth of basal peat (from at least 2300 BC to AD 0); (2) salt-marsh formation (0 to AD 250); (3) a freshening phase (AD 250 to AD 1600?), culminating in the drying out of the marshes and producing a distinct black horizon followed by an aeolian phase with sand deposition; and (4) renewed salt-marsh deposition (AD 1600? to present). From 16 calibrated AMS radiocarbon ages on fossil plant fragments and 4 calibrated conventional radiocarbon ages on peat, we reconstructed a local relative sea-level history that shows a steady sea-level rise of 4 m since 4000 cal yr BP. Contrary to suggestions made in the literature, the relative sea-level record of Ho Bugt does not contain a late Holocene highstand. Relative sea-level changes at Ho Bugt are controlled by glacio-isostatic subsidence and can be duplicated by a glacial isostatic adjustment model in which no water is added to the world's oceans after ca. 5000 cal yr BP.     

The simultaneous use of piles and prestressed anchors in foundation design

The paper presents a simplified design procedure to evaluate the loads in piles and prestressed anchors when simultaneously used in foundations under tension loads and high overturning moments. Although involving some necessary simplifications for the sake of design, the procedure keeps the main features of load transfer from piles and anchors to the surrounding soil. The approximate method has been adopted by the authors in relevant projects in Brazil, whose long term satisfactory performance indicates its appropriate performance. Two practical examples have been selected to illustrate the application of the proposed method. It is shown that anchor prestressing plays an important role in limiting tension loads on the piles and controlling foundation eccentricity. The importance of monitoring for replacement of occasional prestress losses to prevent long-term pile overstressing is illustrated.     

The distribution of radiogenic heat production as a function of depth in the Sierra Nevada Batholith, California

Geochemical analyses and geobarometric determinations have been combined to create a depth vs. radiogenic heat production database for the Sierra Nevada batholith, California. This database shows that mean heat production values first increase, then decrease, with increasing depth. Heat production is 2 μW/m³ within the 3-km-thick volcanic pile at the top of the batholith, below which it increases to an average value of 3.5 μW/m³ at 5.5 km depth, then decreases to 0.5–1 μW/m³ at 15 km depth and remains at these values through the entire crust below 15 km. Below the crust, from depths of 40–125 km, the batholith's root and mantle wedge that coevolved beneath the batholith appears to have an average radiogenic heat production rate of 0.14 μW/m³. This is higher than the rates from most published xenolith studies, but reasonable given the presence of crustal components in the arc root assemblages. The pattern of radiogenic heat production interpreted from the depth vs. heat production database is not consistent with the downward-decreasing exponential distribution predicted from modeling of surface heat flow data. The interpreted distribution predicts a reasonable range of geothermal gradients and shows that essentially all of the present day surface heat flow from the Sierra Nevada could be generated within the 35 km thick crust. This requires a very low heat flux from the mantle, which is consistent with a model of cessation of Sierran magmatism during Laramide flat-slab subduction, followed by conductive cooling of the upper mantle for 70 m.y. The heat production variation with depth is principally due to large variations in uranium and thorium concentration; potassium is less variable in concentration within the Sierran crust, and produces relatively little of the heat in high heat production rocks. Because silica content is relatively constant through the upper 30 km of the Sierran batholith, while U, Th, and K concentrations are highly variable, radiogenic heat production does not vary directly with silica content.     

A reassessment of models for hydrocarbon generation in the Khibiny nepheline syenite complex, Kola Peninsula, Russia

Although hydrocarbon-bearing fluids have been known from the alkaline igneous rocks of the Khibiny intrusion for many years, their origin remains enigmatic. A recently proposed model of post-magmatic hydrocarbon (HC) generation through Fischer-Tropsch (FT) type reactions suggests the hydration of Fe-bearing phases and release of H₂ which reacts with magmatically derived CO₂ to form CH₄ and higher HCs. However, new petrographic, microthermometric, laser Raman, bulk gas and isotope data are presented and discussed in the context of previously published work in order to reassess models of HC generation. The gas phase is dominated by CH₄ with only minor proportions of higher hydrocarbons. No remnants of the proposed primary CO₂-rich fluid are found in the complex. The majority of the fluid inclusions are of secondary nature and trapped in healed microfractures. This indicates a high fluid flux after magma crystallisation. Entrapment conditions for fluid inclusions are 450–550 °C at 2.8–4.5 kbar. These temperatures are too high for hydrocarbon gas generation through the FT reaction. Chemical analyses of rims of Fe-rich phases suggest that they are not the result of alteration but instead represent changes in magma composition during crystallisation. Furthermore, there is no clear relationship between the presence of Fe-rich minerals and the abundance of fluid inclusion planes (FIPs) as reported elsewhere. δ¹³C values for methane range from − 22.4‰ to − 5.4‰, confirming a largely abiogenic origin for the gas. The presence of primary CH₄-dominated fluid inclusions and melt inclusions, which contain a methane-rich gas phase, indicates a magmatic origin of the HCs. An increase in methane content, together with a decrease in δ¹³C isotope values towards the intrusion margin suggests that magmatically derived abiogenic hydrocarbons may have mixed with biogenic hydrocarbons derived from the surrounding country rocks.     

A Decision Support System for the Evaluation of Eco-engineering Strategies for Slope Protection

A decision support system (DSS) has been developed to assist expert and non-expert users in the evaluation and selection of eco-engineering strategies for slope protection. This DSS combines a qualitative hazard assessment of erosion and mass movements with a detailed catalogue of eco-engineering strategies for slope protection of which the suitability is evaluated in relation to the data entered. The slope decision support system (SDSS) is a knowledge based DSS in which knowledge is stored in frames containing rules that can evaluate the available information for a project, stored as project specific information (PSI) in a data file. The advantages of such a system are that it accepts incomplete information and that the qualitative nature of the information does not instil the user with a sense of unjustified exactitude. By its multidisciplinary and progressive nature, the DSS will be of value during the initial stages of an eco-engineering project when data collection and the potential of different eco-engineering strategies are considered. The accent of the output of the DSS is on the application of eco-engineering strategies for slope protection as an environmentally-friendly solution aiding sustainable development. For its acceptance within the engineering community, the DSS needs to prove its predictive capacity. Therefore, its performance has been benchmarked against successful and unsuccessful cases of slope stabilisation using eco-engineering. The target audience and the areas of application of this DSS are reviewed and the strategies for further development in this area suggested.     

Microvariability of line profiles in the spectrum of the star ι Her

We present the results of a search for and analysis of line-profile variations in the spectrum of the star ι Her. The observations were acquired with the 1.8 m telescope of the Bohyunsan Optical Astronomy Observatory (Republic of Korea) in May–June 2004. We obtained 69 spectra of the star with signal-to-noise ratios ≈300 and a time resolution of 5–7 min. Profile variability was revealed for six lines of HI, HeI, and SiIII, in the central parts of the lines. The variability amplitude is ≈(1–2)% in units of the intensity of the adjacent continuum. Evidence was found for cyclic variations of the lines, with periods from ≈7^h to ≈2.9^d. We conclude that ι Her belongs to the group of slowly pulsating stars.     

Hydroextrusion as a possible mechanism for the ascent of diapirs,domes, and mantle plumes

A possible mechanism of the ascent of material within the Earth’s crust and mantle is the mechanism of hydroextrusion, i.e., the effect of squeezing of material under excess pressure. The major factors that predetermine the high plasticity of the material and its ability to produce hydroextrusions are high lithostatic pressures and temperatures. The phenomenon of hydroextrusion can be most clearly illustrated by the example of the origin of salt diapirs. The driving force of hydroextrusions of material in the crust and mantle is excess pressure, which can result from lateral differences between the densities of rocks (as is the case during the development of salt diapirs) and phase transitions associated with a volume increase. When the material of the upper mantle undergoes partial melting with the derivation of basaltic melts at depths of 60–100 km, excess pressures reach 80 MPa, whereas the plasticity limit of 20% melted rocks is no higher than 5 MPa. As a result, the partially molten material is forced from the melting region toward zones with lower lithostatic pressures. A local temperature increase in the transitional zones in the Earth’s mantle at positive dP/dT values of the phase transitions also gives rise to excess pressures, whose values can range from 100 to 800 MPa at a 0.5–3.0% volume change and which can be the driving force during the origin of mantle plumes. Original Russian Text ? V.N. Anfilogov, Yu.V. Khachai, 2006, published in Geokhimiya, 2006, No. 8, pp. 873–878.     

Deep seismic reflection study over the Vindhyans of Rajasthan: Implications for geophysical setting of the basin

This paper presents results of high-resolution deep seismic reflection profiling of the Proterozoic Vindhyan basin of the Rajasthan area along the Chandli-Bundi-Kota-Kunjer profile. Seismic images have been used to estimate the thickness of Vindhyan strata as well as to understand the tectonic framework of the basin. The results are constrained by gravity, magnetic and magnetotelluric data. The study reveals gentle SE-dipping reflection bands representing the Vindhyan strata. The seismic sections depict gradual thickening of the Vindhyan succession towards southeast from Bundi. The velocities of the upper and lower Vindhyans are identified as 4.6-4.8 km/s and 5.1-5.3 km/s. The NW limit of the Vindhyan basin is demarcated by the Great Boundary Fault (GBF) that manifests as a 30 km wide NW dipping thrust fault extending to a depth of 30 km.