Effect of hydrologic management on marsh surface sediment deposition in coastal Louisiana

High rates of coastal land loss in Louisiana have prompted efforts to maintain or restore coastal wetland habitats, and structural management of marsh hydrology is one of a number of approaches that has been adopted. The aim of this study was to determine the effect of hydrologic management measures on marsh-surface sediment deposition in the Mississippi deltaic plain. Four impoundments, ranging in size from 50 ha to 177 ha and similarly sized control sites were included in the study. At each site, marsh-surface sediment traps were collected approximately biweekly for 3.5 yr to measure changes in sediment deposition. There was no significant difference in sediment deposition between any of the impoundment and control sites during the premanagement period. The results show no significant difference in marsh-surface sediment deposition between management year 1992–1993 and management year 1994–1995, but management year 1993–1994 had significantly lower sediment deposition than either the first or the last year of the study. Management year 1992–1993 showed the highest sediment deposition when it was assessed across all basins, areas, and sites, and this high rate of deposition is accounted for by the impact of Hurricane Andrew. For all management years there were significant differences between impoundment and control sites, with control sites showing higher rates of marsh surface sediment deposition than impoundments. No clear pattern was identified concerning the influence of various types of hydrologic management on rates of sediment deposition. This reduction in sediment deposition indicated that the areas under management in this study are receiving insufficient inorganic sediment deposition to keep pace with sea-level rise.     

Decomposition of saltmeadow cordgrass (Spartina patens) in Louisiana coastal marshes

In Louisiana, plant production rates and associated decomposition rates may be important in offsetting high rates of land loss and subsidence in organic marsh soils. Decomposition ofSpartina patens shoot and leaf material was studied by using litter bags in mesohaline marshes in the Barataria and Terrebonne basins of coastal Louisiana.Spartina patens decomposed very slowly with an average decay constant of 0.0007, and approximately 50% of the material remained after 2 years in the field. Material at the Barataria site decomposed faster than did Terrebonne material with trend differences apparent during the first 150 days. This difference might be explained by the higher content of phosphorus in the Barataria material or a flooding period experienced by the Barataria bags during their first 10 days of deployment. Nitrogen and carbon content of the plant material studied did not differ between the two basins. We detected no consistent significant differences in decomposition above, at, or below sediment/water level. BecauseS. patens is the dominant plant in these marshes, and because it is so slow to decompose, we believe thatS. patens shoots are an important addition to vertical accretion and, therefore, marsh elevation.     

Effects of alternative cloud radiation parameterizations in a general circulation model

Using the National Center for Atmospheric Research (NCAR) general circulation model (CCM2), a suite of alternative cloud radiation parameterizations has been tested. Our methodology relies on perpetual July integrations driven by ±2 K sea surface temperature forcing. The tested parameterizations include relative humidity based clouds and versions of schemes involving a prognostic cloud water budget. We are especially interested in testing the effect of cloud optical thickness feedbacks on global climate sensitivity. All schemes exhibit negative cloud radiation feedbacks, i.e., cloud moderates the global warming. However, these negative net cloud radiation feedbacks consist of quite different shortwave and longwave components between a scheme with interactive cloud radiative properties and several schemes with specified cloud water paths. An increase in cloud water content in the warmer climate leads to optically thicker middle- and low-level clouds and in turn negative shortwave feedbacks for the interactive radiative scheme, while a decrease in cloud amount leads to a positive shortwave feedback for the other schemes. For the longwave feedbacks, a decrease in high effective cloudiness for the schemes without interactive radiative properties leads to a negative feedback, while no distinct changes in effective high cloudiness and the resulting feedback are exhibited for the scheme with interactive radiative properties. The resulting magnitude of negative net cloud radiation feed-back is largest for the scheme with interactive radiative properties. Even though the simulated values of cloud radiative forcing for the present climate using this method differ most from the observational data, the approach shows great promise for the future.     

An experimentally verified model for calcite precipitation in veins

Calcite is commonly found as a vein-filling mineral in rocks. However, the factors controlling its deposition are complex and not well understood in quantitative terms. In order to advance our understanding of the processes involved, we have refined the model for calcium carbonate mass transport in subsurface carbonate rocks of Morse and Mackenzie (1993) and developed a new experimental technique to test it. This technique uses a flow-through reactor that simulates a vein opening. Agreement was observed between model predictions and experimental observations for the deposition of calcite in synthetic veins. The influences of surface area to solution volume ratio, solution saturation state with respect to calcite, and flow velocity were well predicted by the model.

The model predicts that in order to have a fairly uniform deposition of calcite within a vein, solution flow must be quite rapid (tens to thousands of cm h⁻¹) or the solution must be only slightly supersaturated with respect to calcite. A low degree of solution supersaturation demands what may be unreasonably large volumes of solution flow to achieve vein filling for the vein configuration we have studied.     

SIMULATING REGIONAL SYSTEMS: A SYSTEM DYNAMICS APPROACH

I.IntroductionTheuseofquantitative111odeIstodevelopUnderstanding,prePareforecastsandexplorepolicyoptionsinthecontextofurbanandroponaldevelpl11entremainsapopularaCtivlty,althouglrathermoresointheacadel11iccol11n1unitythanintl1epIanningprofession.However,thehistoryoftheapplicationoffon11aln1odelstopolicyproblemsdoesnotproducegreatconfidence.objeCtiveevaluationoftheuseofl11odelsinpolicyn1akingiscomplicatedbythefaCtthat,asafonl1ercolleagueoncesaid,con1puter111odeIsarelikecl1ildrenfmostpeopleten…     

Occurrence,chemistry, and origin of immiscible silicate glasses in a tholeiitic basalt: A TEM/AEM study

The occurrence and chemistry of immiscible silicate glasses in a tholeiite mesostasis from the Umtanum formation, Washington, were investigated with transmission electron microscopy and analytical electron microscopy (TEM/AEM). TEM observation reveals isolated, dark globules (2.1 micron or less in diameter) randomly distributed in a transparent matrix glass interstitial to plagioclase laths. The globules less than 0.3 micron and larger than 0.8 micron fall beyond the linear relationship defined by the 0.3–0.8 micron globules in a plot of the logarithm of number versus size. Large globules (0.7 micron or larger in diameter) range from homogeneous to heterogeneous in optical properties and chemistry. Homogeneous globules are completely glassy, whereas heterogeneous globules contain crystalline domains. AEM analyses show that the globules have high Si, Fe, Ca, and Ti with subordinate Mg, Al, P, S, Cl, K, and Mn, which gives high normative fa, px, il, and ap. The matrix glass consists dominantly of Si with low Al and minor Na and K, yielding a high normative qz, or, ab, and an.It is proposed that the silicate liquid immiscibility occurs by reaction of network-modifying cations (NMCs) with dominantly chain-like anionic units in the parental melt to form less polymerized, NMC-bearing units and highly polymerized, Si-rich units. The globules nucleated metastably under supercooled conditions, and medium-size globules become either larger or smaller at lower temperatures. Internal nucleation of NMC-rich phases occurred in some larger globules upon cooling.     

Phytoplankton dynamics within Gulf Stream intrusions on the southeastern United States continental shelf during summer 1981

During July and August 1981 subsurface intrusion of upwelled nutrient-rich Gulf Stream water was the dominant process affecting temporal and spatial changes in phytoplankton biomass and productivity of the southeastern United States continental shelf between 29 and 32°N latitude. Intruded waters in the study area covered as much as 10¹ km including virtually all of the middle and outer shelf and approximately 50% of the inner shelf area.Within 2 weeks following a large intrusion event in late July, middle shelf primary production and Chl a reached 3 to 4 gC m⁻ d⁻¹ and 75 mg m⁻, respectively. At the peak of the bloom 80% of the water column primary production occurred below the surface mixed-layer, and new primary production (i.e., NO₃-supported) exceeded 90% of the total. Chl a-normalized photosynthetic rates were very high as evidenced by high mean assimilation number (15.5 mg C mg Chl a⁻¹ h⁻¹), high mean α (14 mg C mg Chl a⁻¹ Ein⁻¹ m), and no photoinhibition. As a result of the high photosynthetic rates, mean light-utilization index (Ψ) was 2 to 3 times higher than reported for temperature sub-arctic and arctic waters.The results imply a seasonal (June to August) middle shelf production of 150 g C m⁻¹, about 15% higher than previous estimates of annual production on the middle shelf. Intrusions of the scale we observed in 1981 may not occur every summer. However, when such events do occur, they are by far the most important processes controlling summer phytoplankton dynamics of the middle and outer shelf and of the inner shelf in the southern half of the study area.     

Isolation of diagenetic overgrowths on quartz sand grains for oxygen isotopic analysis

Diagenetic overgrowths on detrital quartz sand grains in sandstones can be isolated for direct measurement of their oxygen isotope ratios. Interfacial materials between detrital cores and diagenetic overgrowths are dissolved by etching with dilute HF. The weakened interface breaks when grains are agitated ultrasonically. Subsequent particle size separation is an effective means of concentrating the diagenetic component.