Laboratory experiments and thermal calculations for the development of a next-generation glacier-ice exploration system: Development of an electro-thermal drilling device

A next-generation drilling system, equipped with a thermal drilling device, is proposed for glacier ice. The system is designed to penetrate glacier ice via melting of the ice and continuously analyze melt-water in a contamination-free sonde. This new type of drilling system is expected to provide analysis data in less time and at less cost than existing systems. Because of the limited number of parameters that can be measured, the proposed system will not take the place of conventional drilling systems that are used to obtain ice cores; however, it will provide a useful method for quickly and simply investigating glacier ice.An electro-thermal drilling device is one of the most important elements needed to develop the proposed system. To estimate the thermal supply required to reach a target depth in a reasonable time, laboratory experiments were conducted using ice blocks and a small sonde equipped solely with heaters. Thermal calculations were then performed under a limited range of conditions. The experiments were undertaken to investigate the effects of the shape and material of the drill head and heater temperature on the rate of penetration into the ice. Additional thermal calculations were then performed based on the experimental results.According to the simple thermal calculations, if the thermal loss that occurs while heat is transferred from the heater to ice (in melting the ice) is assumed to be 50%, the total thermal supply required for heaters in the sonde and cable is as follows: (i) 4.8 kW (sonde) plus 0 W (cable) to penetrate to 300 m depth over 10 days into temperate glacier ice for which the temperature is 0 °C at all depths and to maintain a water layer along 300 m of cable; (ii) 10 kW (sonde) plus 19–32 kW (cable) to penetrate to 1000 m depth over 1 month into cold glacier ice for which the temperature is −25 °C at the surface and 0 °C at 1000 m depth and to maintain a water layer along 1000 m of cable; and (iii) 19 kW (sonde) plus 140–235 kW (cable) to penetrate to 3000 m depth over 2 months into an ice sheet for which the temperature is −55 °C at the surface and 0 °C at 3000 m depth and to maintain a water layer along 3000 m of cable. The thermal supply required for the cable is strongly affected by the thickness of the water layer, cable diameter, and the horizontal distance from the ice wall at which the ice temperature was maintained at its initial temperature. A large thermal supply is required to heat 3000 m of cable in an ice sheet (scenario (iii) above), but penetration into glacier ice (scenarios (i) and (ii) above) could be realistic with the use of a currently employed generator.     

The Holocene development of Kushu Lake on Rebun Island in Hokkaido, Japan

Diatom assemblages and sulfur content in sediments were analyzed to clarify changes in the sedimentary environment of Kushu Lake, a coastal lake on Rebun Island in Hokkaido, Japan. Salinity variations were assessed by means of a diatom-based index of paleosalinity and the sedimentary sulfur content. This paper discusses the Holocene development of the lake, in relation to Holocene relative sea-level change. For paleoenvironmental interpretation of the lake development, the rationale of the threshold method (Anundsen et al., 1994) was applied.At ca. 8000 yr BP, a coastal embayment (paleo-Kushu Bay) resulted from marine ingression. The threshold elevation at the mouth of the paleo-Kushu Bay kept pace with the rising sea-level, resulting in its enclosure at the culmination of Holocene marine transgression (ca. 6500–5000 yr BP). From predicted relative sea-level at ca. 6000 yr BP for Rebun Island (Nakada et al., 1991), the threshold may have been at least above –3 to –5 m altitude. A freshwater lake environment with strongly anoxic bottom conditions may have occurred from ca. 5500 to 5100 yr BP. After an important episode of marine ingression, the lake was isolated completely from the open sea at ca. 4900 yr BP. The diatom record suggests that the maximum lacustrine extent occurred at ca. 4900–3100 yr BP. Thereafter, water depth decreased at the lake margins.In Kushu Lake, the threshold elevation, due to a build-up of a coastal barrier, prevents us from determining the amplitude of sea-level changes, even though the age of isolation contacts corresponds to periods of regression and climatic deterioration. In spite of isostatic subsidence, the effective protection provided by the well-developed barrier did not allow registration of any relative sea-level fluctuations since its isolation.     

Influences of channelization on discharge of suspended sediment and wetland vegetation in Kushiro Marsh, northern Japan

The effects of wetlands on hydrology, water quality, and wildlife habitat are internationally recognized. Protecting the remaining wetlands is one of the most important environmental issues in many countries. However wetlands in Japan have been gradually shrinking due to agricultural development and urbanization, which generally lowers the groundwater level and introduces suspended sediment and sediment-associated nutrients into wetlands. We examined the influences of channelization on discharge of suspended sediment and wetland vegetation in Hokkaido, northern Japan. The impact of river channelization was confirmed not only by the sediment budgets but also by river aggradation or degradation after the channelization and by the resultant vegetational changes. The budgets of suspended sediment demonstrated that wash load was the predominant component accounting for 95% of the total suspended load delivered into the wetland. This suspended sediment was primarily transported into the wetland by flooding associated with heavy rainfall. Twenty-three percent of the wash load and 63% of the suspended bed material load were deposited in the channelized reach, which produced aggradation of about 2 m at the end of the reach. A shorting of the length of the channel, due to channelization of a meandering river, steepened the slope and enhanced the stream power to transport sediment. This steepening shifted the depositional zones of fine sediment 5 km downstream and aggraded the riverbed. Development of the watershed may increase not only the water discharge but also the amount of suspended sediments. The aggradation reduced the carrying capacity of the channel and caused sediment ladened water to flood over the wetlands. The fine sediment accumulated on the wetlands gradually altered the edaphic conditions and wetland vegetation. A low percentage (10 to 15%) of organic contents of wetlands' soil is more evidence indicating that the present condition is far different from normal. Original vegetation such as sedges and Alnus japonica were disappearing from the adjacent areas of the river channel and were being replaced by willow trees (Salix spp.).     

The idea of nature in the east in comparison with the west

Conclusion — Contemporary Implications According to Buddhist philosophy, men constitute just one class of living beings. As such, they have no right to unlimited use of natural resources. Also men have no right to unlimited exploitation of animal and plant life, which forms part of Nature. Until recently, Westerners or moderns tended to think that men were quite separate and different from the natural world. This assumption is ungrounded and unreasonable. It has brought about devastation. Men incur retaliation by nature.In order to deal with the difficult situation that has come about, we must seek a solution that is both objective and subjective. On the objective side, we must discard the arrogance of supposing that men are entitled to exploit the natural world at their own will, without limit and regardless of the consequences. It is not appropriate to maintain the idea of conquering nature. Nature should be met with affection. In this connection, we emphasize that the world of nature should not be monopolized by a few countries. The whole natural world should be shared by all mankind. We cannot but feel angry at the small, limited number of countries which totally control the reserves of a limited energy supply, and which are extravagantly wasting what nature has entrusted to them. Just as individual egoism must be curtailed and placed under control, so national and ethnic egoism also should be restrained in the name of justice and respect for nature.On the subjective side, there is need for correction of the opinion of moderns that the progress of mankind consists in the unlimited satisfaction of human desire for material objects. Buddhism taught satisfaction with what is given to men. To know being satisfied was thought to be the way to spiritual happiness. The key to the relationship between man and the environment may very well lie in the control of our desires according to this concept of satisfaction. For that purpose our desire should be scaled to the possibilities of nature conceived as supporting human existence. Nature is not an entity to confront us as if it were quite different from us; it is something to embrace, as we might think it as that from which we cannot separate ourselves. Admitting the disinction between man and nature, we have to think how to live with the knowledge that nature is necessary to us.     

Terrestrial heat flow around the aseismic front of the Japanese Island Arc

Very few data on heat flow are available in the area around the aseismic front of the Japanese Islands. In order to remedy this situation, measurements of the terrestrial heat flow were made at three locations in the eastern part of Fukushima Prefecture, northeastern Honshu, Japan. The observed values of heat flow were 37 mW/m² (0.88 μcal/cm²·s) at Soma, 52 mW/m² (1.25 μcal/cm²·s) at Kashima and 19 mW/m² (0.46 μcal/cm²·s) at Naraha, respectively. These data partially fill the gaps in the terrestrial heat flow data on land in northeastern Honshu, Japan. These values are considerably lower than the average heat flow over the world, but agree well with the previous estimation for the area.     

Transform methods for frequency‐dependent complex stiffness to time domain using real or imaginary data only

The author has studied the transform method of complex stiffness, which is strongly dependent on frequency, to the time domain. In this paper, new transform methods that use only the real part or the imaginary part data are proposed. By applying them to example problems, it is confirmed that the accuracy of the proposed methods is almost high in both causal and noncausal cases. These methods can also be thought as a standby for the Hilbert transform, because the undefined part is easily calculated by the recovering complex function from the obtained impulse response. Copyright © 2007 John Wiley & Sons, Ltd.     

Geology of the Gorny Altai subduction–accretion complex, southern Siberia: Tectonic evolution of an Ediacaran–Cambrian intra-oceanic arc-trench system

The Gorny Altai region in southern Siberia is one of the key areas in reconstructing the tectonic evolution of the western segment of the Central Asian Orogenic Belt (CAOB). This region features various orogenic elements of Late Neoproterozoic–Early Paleozoic age, such as an accretionary complex (AC), high-P/T metamorphic (HP) rocks, and ophiolite (OP), all formed by ancient subduction–accretion processes. This study investigated the detailed geology of the Upper Neoproterozoic to Lower Paleozoic rocks in a traverse between Gorno-Altaisk city and Lake Teletskoy in the northern part of the region, and in the Kurai to Chagan-Uzun area in the southern part. The tectonic units of the studied areas consist of (1) the Ediacaran (=Vendian)–Early Cambrian AC, (2) ca. 630 Ma HP complex, (3) the Ediacaran–Early Cambrian OP complex, (4) the Cryogenian–Cambrian island arc complex, and (5) the Middle Paleozoic fore-arc sedimentary rocks. The AC consists mostly of paleo-atoll limestone and underlying oceanic island basalt with minor amount of chert and serpentinite. The basaltic lavas show petrochemistry similar to modern oceanic plateau basalt. The 630 Ma HP complex records a maximum peak metamorphism at 660 °C and 2.0 GPa that corresponds to 60 km-deep burial in a subduction zone, and exhumation at ca. 570 Ma. The Cryogenian island arc complex includes boninitic rocks that suggest an incipient stage of arc development. The Upper Neoproterozoic–Lower Paleozoic complexes in the Gorno-Altaisk city to Lake Teletskoy and the Kurai to Chagan-Uzun areas are totally involved in a subhorizontal piled-nappe structure, and overprinted by Late Paleozoic strike-slip faulting. The HP complex occurs as a nappe tectonically sandwiched between the non- to weakly metamorphosed AC and the OP complex. These lithologic assemblages and geologic structure newly documented in the Gorny Altai region are essentially similar to those of the circum-Pacific (Miyashiro-type) orogenic belts, such as the Japan Islands in East Asia and the Cordillera in western North America. The Cryogenian boninite-bearing arc volcanism indicates that the initial stage of arc development occurred in a transient setting from a transform zone to an incipient subduction zone. The less abundant of terrigenous clastics from mature continental crust and thick deep-sea chert in the Ediacaran–Early Cambrian AC may suggest that the southern Gorny Altai region evolved in an intra-oceanic arc-trench setting like the modern Mariana arc, rather than along the continental arc of a major continental margin. Based on geological, petrochemical, and geochronological data, we synthesize the Late Neoproterozoic to Early Paleozoic tectonic history of the Gorny Altai region in the western CAOB.     

Identification of stable remanence carriers through a magneto-impedance scanning magnetic microscope

To identify the stable remanence carrier in rock samples, we conducted magnetic microscopic observations combined with conventional stepwise demagnetization experiments. The instrument, which employs an amorphous wire-based magneto-impedance sensor (30 μm diameter, 5 mm length), can document magnetic anomalies (vertical component) of the millimeter to sub-millimeter-thick rock samples with a resolution of 500 μm. Our new technique allows identification of the sources of both stable and unstable remanence components in meteorite and shocked granite samples. However, stray magnetic fields from the sensor magnetize the magnetic minerals in the sample and makes serious artifacts on the magnetic images. Although the artifacts of the induced magnetization should be solved, this new corroborative technique leads to a microscopic discrimination of stable paleomagnetic records from terrestrial and extraterrestrial materials.