Phase transition in Ca-poor clinopyroxenes

High(C2/c)-low(P2₁/c) phase transition in clinoenstatite and pigeonite was successfully observed in situ at high temperatures for the first time under a transmission electron microscope. The phase transition was revealed to possess the characteristics of a first-order transition, due to the coexistence of both phases separated by the sharp interfaces and the nucleation-growth process. The diffusionless and time-independent reaction suggests that the transition occurs athermal-martensitically. Furthermore, the small or even negative thermal hysteresis and the interface motion suggest that the transition is not a typical type but a thermoelastic type of the martensitic transformation. This type of the transformation, studied extensively in metallurgy in relation to shape memory effect, is first recognized in rock-forming minerals.     

Seasonal variability in carbon demand and flux by mesozooplankton communities at subarctic and subtropical sites in the western North Pacific Ocean

We investigated seasonal changes in carbon demand and flux by mesozooplankton communities at subtropical (S1) and subarctic sites (K2) in the western North Pacific Ocean to compare the impact of mesozooplankton communities on the carbon budget in surface and mesopelagic layers. Fecal pellet fluxes were one order higher at K2 than at S1, and seemed to be enhanced by copepod and euphausiid egestion under high chlorophyll a concentrations. The decrease in pellet volume and the lack of any substantial change in shape composition during sink suggest a decline in fecal pellet flux due to coprorhexy and coprophagy. While respiratory and excretory carbon by diel migrants at depth (i.e., active carbon flux) was similar between the two sites, the actively transported carbon exceeded sinking fecal pellets at S1. Mesozooplankton carbon demand in surface and mesopelagic layers was higher at K2 than S1, and an excess of demand to primary production and sinking POC flux was found during some seasons at K2. We propose that this demand was met by supplementary carbon sources such as feeding on protozoans and fecal pellets at the surface and carnivory of migrants at mesopelagic depths.     

Seasonal changes in the mesozooplankton biomass and community structure in subarctic and subtropical time-series stations in the western North Pacific

Seasonal changes in mesozooplankton biomass and their community structures were observed at time-series stations K2 (subarctic) and S1 (subtropical) in the western North Pacific Ocean. At K2, the maximum biomass was observed during the spring when primary productivity was still low. The annual mean biomasses in the euphotic and 200- to 1000-m layers were 1.39 (day) and 2.49 (night) g C m^?2 and 4.00 (day) and 3.63 (night) g C m^?2, respectively. Mesozooplankton vertical distribution was bimodal and mesopelagic peak was observed in a 200- to 300-m layer; it mainly comprised dormant copepods. Copepods predominated in most sampling layers, but euphausiids were dominant at the surface during the night. At S1, the maximum biomass was observed during the spring and the peak timing of biomass followed those of chlorophyll a and primary productivity. The annual mean biomasses in the euphotic and 200- to 1000-m layers were 0.10 (day) and 0.21 (night) g C m^?2 and 0.47 (day) and 0.26 (night) g C m^?2, respectively. Copepods were dominant in most sampling layers, but their mean proportion was lower than that in K2. Mesozooplankton community characteristics at both sites were compared with those at other time-series stations in the North Pacific and with each other. The annual mean primary productivities and sinking POC fluxes were equivalent at both sites; however, mesozooplankton biomasses were higher at K2 than at S1. The difference of biomasses was probably caused by differences of individual carbon losses, population turnover rates, and trophic structures of communities between the two sites.     

Behavior of fresh water injected at the surface of a uniformly rotating ocean

The behavior of low density fresh water injected at the surface of a uniformly rotating saline water was investigated on the basis of a tank experiment. The injected water mass shows a clockwise circulation and grows gradually with an axisymmetric convex shape, until it breaks into two vortices at a critical size. An experimental formula for the change of radius of the water mass with time for the axisymmetric stage is obtained. It is shown that within our experimental range of values the radius of the water mass increases almost in proportion tot ^1/2, wheret is the elapse time, while the inviscid theory indicates that the radius should increase in proportion tot ^1/4. The dependence of the radius on elapse time is essential for forecasting the extent of discharged waters. The position of the maximum azimuthal velocity is fixed at \(V = - ge^{ - a^2 q^2 } \) within our experimental range of values wherer is the radial coordinate,f the Coriolis parameter,v the viscosity coefficient andQ the flow rate of injection, respectively. This radius corresponds to the radial scale derived by Gillet al. (1979). The steadiness of the position of the maximum azimuthal velocity may be essential in partition of the water mass into inner and outer regions and in the understanding the derived experimental formula. The critical radius for breaking is also investigated. The radius is shown to be independent ofQ and to be almost proportional to (Δ _ρ / _ρ )^1/2 f ^-1 whereρ is the density of the saline water andΔρ the density difference between the saline and injected waters. Even after the water supply is cut off in the axisymmetric stage, the radius of the water mass increases at almost the same rate as before, while its thickness decreases. The behavior after supply cut-off is discussed in the Appendix.     

Long-Term Variability of North Pacific Subtropical Mode Water in Response to Spin-Up of the Subtropical Gyre

The Meteorological Research Institute's ocean general circulation model (MRI-OGCM) has been used to investigate the temperature variability of the North Pacific Subtropical Mode Water (NPSTMW) over a time series longer than 5 years via the spin-up of the subtropical gyre. Besides an interannual variation, the wintertime sea surface temperature in the area where the NPSTMW is formed, and the temperature of the NPSTMW itself, both change remarkably in a >5-year time scale. An analysis of heat budgets showed that the long-term changes in NPSTMW temperature are due mainly to a leading advection of heat by the Kuroshio Extension and compensating surface heat flux. As a result of a dynamical adjustment to the wind stress fields, the transports of the Kuroshio and the Kuroshio Extension increased in the mid 1970s with a lag of 3 years after the wind stress curl in the central North Pacific. The increased heat advection by the Kuroshio Extension induces a warming in the mixed layer in the NPSTMW formation area, followed by a warming of the NPSTMW itself. Both these warming actions increase the heat release to the atmosphere. These results imply that the surface heat flux over the Kuroshio Extension area varies in response to the change in the ocean circulation through the spin-up of the subtropical gyre. This revised version was published online in August 2006 with corrections to the Cover Date.     

Surface microtopography of metamorphic white micas

Gold decoration and platinum-carbon-shadowing techniques of electron microscopy have been applied to study the surface microtopographs of noncleavage (001) faces of porphyroblastic white micas and sericite crystals collected from the chlorite, biotite, and garnet zones in the Shiragayama area in the Sanbagawa metamorphic terrain, Shikoku, Japan. Two different types of surface microtopograph have been observed; parallel step system and saw-tooth step system. The former is interpreted as representing the surface microtopographs formed either by growth or under near equilibrium conditions, the latter either by dissolution or under rigorous kinetic conditions. The former has been observed on porphyroblastic white micas occurring in the middle portion of each metamorphic zone and on all sericite crystals, the latter on most sericites and on porphyroblastic white micas occurring along the boundaries of the neighboring metamorphic zones. It is suggested that the observed variations in the surface microtopographic characteristics are due to Ostwald ripening during a kind of sintering process in which interstitial water plays an essential role, and that the drastic changes along the metamorphic zone boundaries are due to dehydration reactions. Retrogressive metamorphism is considered to have an almost negligible effect, if any, upon the surface microtopographs.     

基于建筑抗震设计规范的设计用地震动分析

首先利用我国《建筑抗震设计规范》(GB 50011-2001)中的地震影响系数曲线,制成适合于我国抗震设计规范的人工地震波形,然后使用该人工波和日本现行设计用地震动,对隔震结构进行地震响应分析,最后由地震响应结果对所提出的模拟设计用地震动大小进行评价,得到一些有意义结论,供抗震设计人员在设计时参考。     

Fine-grained aggregates in L3 chondrites

The textures and chemical compositions of the constituent minerals of the fine-grained aggregates (FGA's) of L3 chondrites were studied by the backscattered electron image technique, electron probe microanalysis, and transmission electron microscopy. Plagioclase and glass in the interstices between fine grains of olivine and pyroxene indicate that the FGA's once partly melted. Compositional zoning and decomposition texture of pyroxenes are similar to those observed in chondrules, indicating a common cooling history of the FGA's and chondrules. Therefore, the mechanism that caused melting of the FGA's is considered to be the same as for chondrules. Bulk compositions of the FGA's are within the range of those of chondrules, so some chondrules probably were produced by complete melting of the same precursor materials as those of the FGA's. The precursor materials must have included fine olivine and other grains that probably are condensates.     

Time variation of the X-ray spectrum and optical luminosity of SCO X-1

Results of rocket observations of SCO X-1 over the spectral range of 220 keV are presented. The observations have been performed partly in India and partly in Japan under the collaboration of the three groups. The present results are compared with results of similar observations carried out by the LRL (Lawrence Radiation Laboratory) group. Some of these X-ray observations were accompanied by simultaneous optical observations. Relationships between the hardness of the X-ray spectrum and the X-ray intensity and between the hardness and the optical luminosity are compiled. The relationships among the parameters (temperature, density and size) which characterize the postulated isothermal cloud model of SCO X-1 are given. They indicate that SCO X-1 is characterized by a temperature of about 10⁷–10⁸K, a density of about 10¹⁶–10¹⁷ cm^–3 and a radius of about 10⁸–10⁹ cm respectively. We further show that the temperature is inversely correlated with the size of the source; an increase in temperature corresponds to a decrease in the radius and an increase in density.