The difference in chemical composition of the 1962 lava from miyakezima magma reservoir in Japan

Many examples of mixed magmas in banded lavas have been studied. Another type of mixed magmas or inhomogeneity of magma reservoir found in the 1962 lava flows of Miyake-zima Volcano erupted from fissures is reported.     

Simulations of deep pencil-beam redshift surveys

We create mock pencil-beam redshift surveys from very large cosmological N -body simulations of two cold dark matter (CDM) cosmogonies, an Einstein–de Sitter model ( τ CDM) and a flat model with Ω₀=0.3 and a cosmological constant (ΛCDM). We use these to assess the significance of the apparent periodicity discovered by Broadhurst et al. Simulation particles are tagged as 'galaxies' so as to reproduce observed present-day correlations. They are then identified along the past light-cones of hypothetical observers to create mock catalogues with the geometry and the distance distribution of the Broadhurst et al. data. We produce 1936 (2625) quasi-independent catalogues from our τ CDM (ΛCDM) simulation. A couple of large clumps in a catalogue can produce a high peak at low wavenumbers in the corresponding one-dimensional power spectrum, without any apparent large-scale periodicity in the original redshift histogram. Although the simulated redshift histograms frequently display regularly spaced clumps, the spacing of these clumps varies between catalogues and there is no 'preferred' period over our many realizations. We find only a 0.72 (0.49) per cent chance that the highest peak in the power spectrum of a τ CDM (ΛCDM) catalogue has a peak-to-noise ratio higher than that in the Broadhurst et al. data. None of the simulated catalogues with such high peaks shows coherently spaced clumps with a significance as high as that of the real data. We conclude that in CDM universes, the regularity on a scale of ∼130  h ⁻¹ Mpc observed by Broadhurst et al. has a priori probability well below 10⁻³.     

Juxtaposition of India and Madagascar: A Perspective

Proterozoic terrains in South India and Madagascar provide important clues in understanding the Gondwanaland tectonics, especially the assembly of this mega-continent during the Pan-African period. The Archaean terrains in both Madagascar and India are characterized by N-S trending greenstone belts occurring within gneissose granitic rocks in the northern part. Extensive development of K-rich granitic rocks of ca. 2.5 Ga is also characteristic in both areas. Such a broad age zonation of younger Dharwar (ca 2.6–3.0 Ga) in the north and the older Sargur (ca 3.0–3.4 Ga) in the south as in South India remains to be identified in future studies from Madagascar. The occurrence of greenschist facies rocks in the northeastern part and higher grade rocks in most of other parts in the north-central terrain of Madagascar is comparable with the general tendency of increasing metamorphic grade from northwestern to southern areas ranging from greenschist to granulite facies in South India. The Proterozoic crystalline rocks in both continents show pronounced lithological similarity with the wide occurrence of graphite-bearing khondalite in association with charnockitic rocks. While the Archaean-Proterozoic boundary is well defined in southern India by the Palghat-Cauvery or the KKPT shear zones as recently identified, this boundary is ill-defined in Madagascar due to extensive Pan-African overprinting, as well as the development of the Proterozoic cover sequence, the Itremo Group. There is also a possible general correlation between the Mesoproterozoic cover sequences in Madagascar and India, such as between the Itremo Group of west-central Madagascar and the Kaladgi and Cuddapah sequences of South India. The Pan-African granulite facies metamorphism of ca. 0.5 Ga extensively developed in both India and Madagascar is generally comparable in intensity and extent. P-T conditions and P-T-t paths also appear comparable, with the general range of ca. 700–1000°C and 6–9 kb, and near-isothermal decompressional paths. A-type granite plutons and alkaline rocks including anorthosites and mafic plutonic rocks of ca. 500–800 Ma develop in both terrains, provide strong basis for the correlation of both terrains, and define a Pan-African igneous province within East Gondwanaland. Major shear zones in both continents are expected to play a critical role in the correlation, albeit are still poorly constrained. Detailed elucidation of the tectonic history of the shear zones, and the timing of various events along the shear zones would provide important constraints on the correlation of the two continental fragments.     

Diamond in metasedimentary crustal rocks from Pohorje,Eastern Alps: a window to deep continental subduction

We report the first finding of diamond and moissanite in metasedimentary crustal rocks of Pohorje Mountains (Slovenia) in the Austroalpine ultrahigh‐pressure (UHP) metamorphic terrane of the Eastern Alps. Microscopic observations and Raman spectroscopy show that diamond occurs in situ as inclusions in garnet, being heterogeneously distributed. Under the optical microscope, diamond‐bearing inclusions are of cuboidal to rounded shape and of pinkish, yellow to brownish colour. The Raman spectra of the investigated diamond show a sharp, first order peak of sp³‐bonded carbon, in most cases centred between 1332 and 1330 cm^?1, with a full width at half maximum between 3 and 5 cm^?1. Several spectra show Raman bands typical for disordered graphitic (sp²‐bonded) carbon. Detailed observations show that diamond occurs either as a monomineralic, single‐crystal inclusion or it is associated with SiC (moissanite), CO₂ and CH₄ in polyphase inclusions_. This rare record of diamond occurring with moissanite as fluid‐inclusion daughter minerals implies the crystallization of diamond and moissanite from a supercritical fluid at reducing conditions. Thermodynamic modelling suggests that diamond‐bearing gneisses attained P–T conditions of ≥3.5 GPa and 800–850 °C, similar to eclogites and garnet peridotites. We argue that diamond formed when carbonaceous sediment underwent UHP metamorphism at mantle depth exceeding 100 km during continental subduction in the Late Cretaceous (c. 95–92 Ma). The finding of diamond confirms UHP metamorphism in the Pohorje Mountains, the most deeply subducted part of Austroalpine units.     

Temporal variations in the current structure and volume transport of the Coastal Oyashio revealed by direct current measurement

Direct current measurements by a shipboard and bottom-mounted acoustic Doppler current profiler and concurrent hydrographic observations with a CTD were conducted off southeastern Hokkaido, Japan, between January and May 2005 to reveal temporal variations in the current structure and volume transport of the Coastal Oyashio (CO). The CO, which has a baroclinic jet structure with southwestward speeds exceeding 90 cm s^?1 and a width of 7–8 km, was associated with a surface-to-bottom density front and was formed on the offshore side of the shelf break. The volume transport of CO (T _CO) was estimated by integrating the fluxes of lower-density water that was trapped against the coast along the density front represented by the 26.2 σ _θ isopycnal line. This transport decreased monotonously from 0.79 Sv (1 Sv = 10⁶ m³ s^?1) in January to 0.21 Sv in March and subsequently to 0.12 Sv in May, possibly due to the decay of the East Sakhalin Current Water in the Okhotsk Sea. Accompanied by a decrease in T _CO, the location of the jet structure associated with the density front moved toward the coast while the maximum speed of the jet decreased and the tilt of the front became more horizontal. Consequently, more saline offshore Oyashio water flowed into the deep part of the shelf area, and the current structure altered from relatively barotropic in winter to baroclinic in spring. This study is the first to estimate the observed volume transport of the CO from direct current measurements.     

Decadal Variability of Subsurface Temperature in the Central North Pacific

Decadal variability of subsurface temperature in the North Pacific has been investigated. Two dominant regions were found; the central subarctic region (CSa) and the north-eastern subtropical region (NESt). In CSa, cooling (warming) of wintertime subsurface temperature corresponds to the large (small) temperature gradient and southward (northward) shift of subsurface temperature front, associated with the increase (decrease) of positive wind stress curl and the southward (northward) shift of curl τ zero line with 2 years delay. It is suggested that the relocation of subtropical-subarctic boundary plays an important role. In NESt, importance of heat flux through the sea surface and heat divergence in the Ekman layer is also discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Voids in a ΛCDM universe

We study the formation and evolution of voids in the dark matter distribution using various simulations of the popular Λ cold dark matter cosmogony. We identify voids by requiring them to be regions of space with a mean overdensity of −0.8 or less – roughly the equivalent of using a spherical overdensity group finder for haloes. Each of the simulations contains thousands of voids. The distribution of void sizes in the different simulations shows good agreement when differences in particle and grid resolution are accounted for. Voids very clearly correspond to minima in the smoothed initial density field. Apart from a very weak dependence on the mass resolution, the rescaled mass profiles of voids in the different simulations agree remarkably well. We find a universal void mass profile of the form  ρ(< r )/ρ( r _eff) ∝ exp[( r / r _eff)^α]  , where r _eff is the effective radius of a void and  α∼ 2  . The mass function of haloes in voids is steeper than that of haloes that populate denser regions. In addition, the abundances of void haloes seem to evolve somewhat more strongly between redshifts ∼1 and 0 than the global abundances of haloes.     

Biogeochemistry of nitrous oxide in groundwater in a forested ecosystem elucidated by nitrous oxide isotopomer measurements

The biological and physical controls on microbial processes that produce and consume N₂O in soils are highly complex. Isotopomer ratios of N₂O, with abundance of ¹⁴N¹⁵N¹⁶O, ¹⁵N¹⁴N¹⁶O, and ¹⁴N¹⁴N¹⁸O relative to ¹⁴N¹⁴N¹⁶O, are promising for elucidation of N₂O biogeochemistry in an intact ecosystem. Site preference, the nitrogen isotope ratio of the central nitrogen atom minus that of the terminal nitrogen atom, is useful to distinguish between N₂O via hydroxylamine oxidation and N₂O via nitrite reduction.We applied this isotopomer analysis to a groundwater system in a temperate coniferous-forested ecosystem. Results of a previous study at this location showed that the N₂O concentration in groundwater varied greatly according to groundwater chemistry, i.e. NO₃⁻, DOC, and DO, although apportionment of N₂O production to nitrification or denitrification was ambiguous. Our isotopic analysis (δ¹⁵N and δ¹⁸O) of NO₃⁻ and N₂O implies that denitrification is the dominant production process of N₂O, but definitive information is not derived from δ¹⁵N and δ¹⁸O analysis because of large variations in isotopic fractionations during production and consumption of N₂O. However, the N₂O site preference and the difference in δ¹⁵N between NO₃⁻ and N₂O indicate that nitrification contributes to total N₂O production and that most measured N₂O has been subjected to further N₂O reduction to N₂. The implications of N₂O biogeochemistry derived from isotope and isotopomer data differ entirely from those derived from conventional concentration data of DO, NO₃⁻, and N₂O. That difference underscores the need to reconsider our understanding of the N cycle in the oxic-anoxic interface.     

Internal differentiation of Kutsugata lava flow from Rishiri Volcano,Japan: Processes and timescales of segregation structures' formation

Internal differentiation processes in a solidifying lava flow were investigated for the Kutsugata lava flow from Rishiri Volcano in northern Japan. In a representative 6-m thick lava flow that was investigated in detail in this study, segregation products darker than the host lavas manifested mainly in the form of pipes (vesicle cylinders) and layers (vesicle sheets), occurring around 0.5–2.3 m and 2.0–4.0 m above the base, respectively. Both the cylinders and sheets are significantly richer in incompatible elements such as TiO₂ and K₂O than the host lavas, which suggest that these products essentially represent residual melt produced during solidification of the lava flow. Field observation and the geochemical features of the lavas suggest that the vesicle cylinders grew upward from near the base of the flow by continuous feeding of residual melt from the neighboring host lavas to the heads of the cylinders. On the other hand, the vesicle sheets were produced in situ in the solidifying lava flow as fracture veins caused by horizontal compression. The vesicle cylinders have a remarkably higher MgO content (up to 8 wt.%) than the host lava (< 6 wt.%), whereas the vesicle sheets display MgO depletion (as low as 3.5 wt.%). The relatively high MgO content of the vesicle cylinders cannot be explained solely by the mechanical mixing of olivine phenocrysts with the residual melt. It is suggested that the vesicle cylinders were produced by the extraction of olivine-bearing interstitial melt from an augite-plagioclase network in the host lava, whereas the vesicle sheets were formed by the migration of the residual melt from a crystal network consisting of plagioclase, augite, and olivine in the host lava into platy fractures. We infer that this selective crystal fractionation for forming the vesicle cylinders resulted from processes in which abundant vesicles rejected from the upward-migrating floor solidification front prevented olivine crystals from being incorporated into the crystal network in the host lava. The vesicle cylinders are considered to have formed in ∼ 1 day after the lava flow came to rest, while relatively large vesicle sheets (> 1 cm thick) appeared much later (after ∼ 9 days). The formation of these segregation products was essentially complete within 20 days after the lava emplacement.