230Th/234U and 14C dating of a lowstand coral reef beneath the insular shelf off Irabu Island, Ryukyus, southwestern Japan

Abstract   High-resolution seismic reflection profiles delineated the distribution of mound-shaped reflections, which were interpreted as reefs, beneath the insular shelf western off Irabu Island, Ryukyus, southwestern Japan. A sediment core through one of the mounded structures was recovered from the sea floor at a depth of −118.2 m by offshore drilling and was dated by radiometric methods. The lithology and coral fauna of the core indicate that the mounded structure was composed of coral–algal boundstone suggesting a small-scaled coral reef. High-precision α-spectrometric ²³⁰Th/²³⁴U dating coupled with calibrated accelerator mass spectrometric ¹⁴C ages of corals obtained reliable ages of this reef ranging from 22.18 ± 0.63 to 30.47 ± 0.98 ka. This proves that such a submerged reef was formed during the lowstand stage of marine oxygen isotope stages 3–2. The existence of low-Mg calcite in the aragonitic coral skeleton of 22.18 ± 0.63 ka provides evidence that the reef had once been exposed by lowering of the relative sealevel to at least −126 m during the last glacial maximum in the study area. There is no room for doubt that a coral reef grew during the last glacial period on the shelf off Irabu Island of Ryukyus in the subtropical region of western Pacific.     

Damage detection of base‐isolated buildings using multi‐input multi‐output subspace identification

A damage detection algorithm of structural health monitoring systems for base‐isolated buildings is proposed. The algorithm consists of the multiple‐input multiple‐output subspace identification method and the complex modal analysis. The algorithm is applicable to linear and non‐linear systems. The story stiffness and damping as damage indices of a shear structure are identified by the algorithm. The algorithm is further tuned for base‐isolated buildings considering their unique dynamic characteristics by simplifying the systems to single‐degree‐of‐freedom systems. The isolation layer and the superstructure of a base‐isolated building are treated as separate substructures as they are distinctly different in their dynamic properties. The effectiveness of the algorithm is evaluated through the numerical analysis and experiment. Finally, the algorithm is applied to the existing 7‐story base‐isolated building that is equipped with an Internet‐based monitoring system. Copyright © 2004 John Wiley & Sons, Ltd.     

Geology of the summit limestone of Mount Qomolangma (Everest) and cooling history of the Yellow Band under the Qomolangma detachment

Abstract   Newly discovered peloidal limestone from the summit of Mount Qomolangma (Mount Everest) contains skeletal fragments of trilobites, ostracods and crinoids. They are small pebble-sized debris interbedded in micritic bedded limestone of the Qomolangma Formation, and are interpreted to have been derived from a bank margin and redeposited in peri-platform environments. An exposure of the Qomolangma detachment at the base of the first step (8520 m), on the northern slope of Mount Qomolangma was also found. Non-metamorphosed, strongly fractured Ordovician limestone is separated from underlying metamorphosed Yellow Band by a sharp fault with a breccia zone. The ⁴⁰Ar–³⁹Ar ages of muscovite from the Yellow Band show two-phase metamorphic events of approximately 33.3 and 24.5 Ma. The older age represents the peak of a Barrovian-type Eo-Himalayan metamorphic event and the younger age records a decompressional high-temperature Neo-Himalayan metamorphic event. A muscovite whole-rock ⁸⁷Rb–⁸⁶Sr isochron of the Yellow Band yielded 40.06 ± 0.81 Ma, which suggests a Pre-Himalayan metamorphism, probably caused by tectonic stacking of the Tibetan Tethys sediments in the leading margin of the Indian subcontinent. Zircon and apatite grains, separated from the Yellow Band, gave pooled fission-track ages of 14.4 ± 0.9 and 14.4 ± 1.4 Ma, respectively. These new chronologic data indicate rapid cooling of the hanging wall of the Qomolangma detachment from approximately 350°C to 130°C during a short period (15.5–14.4 Ma).     

Molecular cloning and mRNA expression of cytochrome P4501A1 and 1A2 in the liver of common minke whales (Balaenoptera acutorostrata)

This study presents full-length cDNA sequences of CYP1A1 and 1A2, in common minke whale (Balaenoptera acutorostrata) from the North Pacific. Both CYP1A1 and CYP1A2 cDNAs had an open reading frame of 516 amino acid residues, and predicted molecular masses were 58.3 kDa and 58.1 kDa, respectively. The deduced full-length amino acid sequence of CYP1A1 revealed higher identities with those of sheep (86%) and pig (87%), and that of CYP1A2 was most closely related to human (82%) and monkey CYP1A2 (82%) among species from which CYP1A2 has been isolated so far. Differences in certain conserved and functional amino acid residues of CYP1A1 and 1A2 between common minke whale and other mammalian species indicate the possibility of their specific metabolic function. Concentrations of organochlorine compounds (OCs) including PCBs and DDTs analyzed in common minke whale liver showed no significant correlation with hepatic mRNA expression levels of CYP1A1 and CYP1A2, indicating no induction of these enzymes by such OCs.     

Estimating the impact parameters of cosmic dust particles using a piezoelectric lead zirconate titanate detector

A cosmic dust detector for installation on a satellite is currently being developed using piezoelectric lead zirconate titanate (PZT), which can possess both functions of the collector and the transducer. The characteristics of the PZT detector have been studied by bombarding it with hypervelocity particles supplied by a Van de Graaff accelerator. The front surface of the detector used in this study was covered with a white paint to reduce any increase in the temperature due to the solar radiation. There was a linear relationship between the rise time of the signal produced by the detector and the particle's velocities, which were above 10 km/s on impact. This implies that individual particle velocities on impact can be inferred through the empirical formula derived from the data obtained from the PZT detector.     

Distribution of boulders at Miyara Bay of Ishigaki Island,Japan: A flow characteristic indicator of tsunami and storm waves

This study investigates the distribution of boulders at Miyara Bay of Ishigaki Island, Japan. These boulders were deposited on a reef flat extending approximately 400–1300 m in width. Most boulders were rectangular to ellipsoidal, without sharp broken edges. They are reef and coral rock fragments estimated as <335 m³ (<633 t). Locally in the bay, the relationship between the boulder weight and position shows that boulders of a given weight have a clear limit on seaward distribution on the reef flat. For example, more than 1, 10, and 100 tons of boulders were deposited, respectively, more than 500, 300, and 100 m from the reef edge. The line is consistent with the possible landward transport limit by maximum storm waves at the Ryukyu Islands, suggesting that the line was formed by the reworking of some boulders by maximally strong storm waves, although we can not exclude the possibility that the line was formed by tsunamis. Furthermore, 68% of boulders at the bay are deposited beyond this line. Therefore, the presence of these boulders at their present positions is difficult to explain solely by storm waves, implying the possible tsunami origin of these boulders. The boulders are characteristically concentrated along the high‐tide line, suggesting the drastic reduction of the tsunami hydraulic force along the line. Previous studies using radiocarbon age dating, as well as our study, imply that at least 69 boulders at Miyara Bay were probably deposited at their present positions by the 1771 Meiwa tsunami, although some of these boulders might have been emplaced and displaced on the reef flat by prior tsunami or storm surges.     

Modification of sea-salt aerosols over the coastal area in china

Ｉ．ＩＮＴＲＯＤＵＣＴＩＯＮＡｅｒｏｓｏｌｃｏｍｐｏｓｉｔｉｏｎｉｓａｐｉｅｃｅｏｆｉｍｐｏｒｔａｎｔｉｎｆｏｒｍａｔｉｏｎｆｏｒｒａｄｉａｔｉｏｎｔｒａｎｓｆｅｒ．Ｔｗｏｐａｒａｍｅｔｅｒｓ,ｎａｒｎｅｌｙ,ｔｏｔａｌｌｏａｄｉｎｇａｎｄｃｈｅｍｉ...     

Restoring forces on vertical circular cylinders forced by earthquakes

An eigenfunction solution is presented for the dynamic response of vertical circular cylinders to earthquake excitation in a compressible fluid of finite depth. This single eigenseries expansion eliminates the need for a double summation over both the eigenfunctions and the trial functions as required by Rayleigh-Ritz methods. Revised definitions for the added mass and hydrodynamic radiation damping coefficients per unit length are derived from the hydrodynamic fluid pressures. Based on comparisons between these newly defined coefficients, the compressibility of the fluid is found to be relatively more important at dimensionless frequencies greater than unity (ω > 1.0) when analysing both rigid and flexible cylinders having relatively large diameter to water depth ratios,r₀/h > 0.25 (squatty type). This conclusion regarding the relative importance of the fluid compressibility is derived from a comparison between the relative magnitudes and the vertical distributions over depth of both the added mass and radiation damping coefficients per unit length for both rigid and flexible squatty cylinders. From additional comparisons with Rayleigh-Ritz solutions that require trial functions, the results for totally immersed flexible slender cylinders (r₀/h< 0.10) are shown to be equivalent; but the results for totally immersed flexible squatty cylinders (r₀/h > 0.25) are not. The reason for this difference appears to be in the truncation of the trial function series in the Rayleigh-Ritz methods, which excludes the higher mode shapes, and in the definitions of the added mass coefficients. Comparisons with laboratory data for both rigid and flexible cylinders confirm the accuracy of the solutions obtained by the eigenseries in the limited frequency interval above the highest frequency for surface gravity waves (f > 1.0 Hz) and below the first dimensionless cut-off frequency for acoustic waves (ω< 1.0).     

A possible cause of the AO polarity reversal from winter to summer in 2010 and its relation to hemispheric extreme summer weather

In 2010, the Northern Hemisphere, in particular Russia and Japan, experienced an abnormally hot summer characterized by record-breaking warm temperatures and associated with a strongly positive Arctic Oscillation (AO), that is, low pressure in the Arctic and high pressure in the midlatitudes. In contrast, the AO index the previous winter and spring (2009/2010) was record-breaking negative. The AO polarity reversal that began in summer 2010 can explain the abnormally hot summer. The winter sea surface temperatures (SST) in the North Atlantic Ocean showed a tripolar anomaly pattern—warm SST anomalies over the tropics and high latitudes and cold SST anomalies over the midlatitudes—under the influence of the negative AO. The warm SST anomalies continued into summer 2010 because of the large oceanic heat capacity. A model simulation strongly suggested that the AO-related summertime North Atlantic oceanic warm temperature anomalies remotely caused blocking highs to form over Europe, which amplified the positive summertime AO. Thus, a possible cause of the AO polarity reversal might be the “memory” of the negative winter AO in the North Atlantic Ocean, suggesting an interseasonal linkage of the AO in which the oceanic memory of a wintertime negative AO induces a positive AO in the following summer. Understanding of this interseasonal linkage may aid in the long-term prediction of such abnormal summer events.     

Multi-resolution clustering analysis and 3-D visualization of multitudinous synthetic earthquakes

We use modern and novel techniques to study the problems associated with detection and analysis of multitudinous seismic events, which form the background for isolated great earthquakes. This new approach involves multivariate analysis of low and large magnitude events recorded in space over a couple of centuries in time. We propose here the deployment of the clustering scheme both for extracting small local structures and large-scale trends in synthetic data obtained from four numerically simulated models with: uniform properties (U), a Parkfield-type asperity (A), fractal brittle properties (F), and multi-size-heterogeneity fault zone (M). The mutual nearest neighbor (mnn) clustering scheme allows for extraction of multi-resolutional seismic anomalies in both the spatio-temporal and multi-dimensional feature space. We demonstrate that the large earthquakes are correlated with a certain pathway of smaller events. Visualization of the anomalies by using a recently introduced visualization package Amira reveals clearly the spatio-temporal relationships between clusters of small, medium and large earthquakes, indicating significant stress relaxation across the entire fault region. We demonstrate that this mnn scheme can extract distinct clusters of the smallest events, which precede and follow a singularly large magnitude earthquake. These clusters form larger spatio-temporal structures comprising a series of large earthquakes. The link between the large and medium magnitude events is not so clearly understood. Short-ranged correlations are dominated by strong spatio-temporal anomalies, thus reflecting the global seismic properties of the entire fault zone.Electronic Supplementary Material Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.