Morphology and propagation styles of Miocene submarine basanite lavas at Stanley, northwestern Tasmania, Australia

Miocene submarine basanite pillows, lava lobes, megapillows and sheet lavas in the Stanley Peninsula, northwestern Tasmania, Australia, are well-preserved in three dimensions. The pillows have ropy wrinkles, transverse wrinkles, symmetrical wrinkles, contraction cracks and three types of spreading cracks on their surfaces, and concentric and radial joints in the interior. The lava lobes have ropy wrinkles and contraction cracks on their surfaces. The megapillows are cylindrical with a smoothly curved upper surface and steep sides, and are characterized by distinct radial columnar joints in the interior. They are connected to pillows that propagate radially from its basal margin. The sheet lavas are tabular and have vertical columnar joints in the interior. The largest sheet lava shows a remarkable gradation from a lower 5-m-thick pillow facies to an upper massive facies. The pillows, lava lobes, megapillows and sheet lavas are inferred to have been emplaced completely below sea level but in a shallow marine environment. Their morphological features suggest that the pillows grew by episodic rupture of a near-solid crust and emergence of hot lava, whereas the lava lobes propagated by continuous stretching of the outer skin at the flow front. The megapillows and sheet lavas were master feeder channels by which molten lava was conveyed to the advancing pillows. The sheet lavas propagated by repeated processes of pillow formation and overriding by an upper massive part. Alternating pillow and massive facies commonly found in ocean-floor drill cores and exposed in cross-section in many subaqueous volcanic successions may have formed by propagation of pillows from the basal margins of advancing sheet lavas.     

Middle Miocene to Quaternary primary basalt and high magnesian andesite magmas of North Hokkaido, Japan: Source mantle characteristics and degrees of partial melting

Abstract   Middle Miocene to Quaternary primitive basalts and high magnesian andesite (HMA) in North Hokkaido resulted from three periods of intense volcanism; early-stage (12–10 Ma), middle-stage (9–7 Ma) and late-stage (3–0 Ma). Based on the chemical compositions of olivines and chromian spinels and bulk chemistry of the primitive rocks, we examined depths of segregation of the calculated primary magmas and the degrees of partial melting of the source mantle. In the context of asthenospheric mantle upwelling, petrological data from the present study can be accounted for by the secular change in the depth of magma segregation from the upwelled asthenospheric mantle, which is composed of fertile peridotite. Thus, the early-stage primary magmas were generated by higher degrees of partial melting of the shallower part of hot asthenospheric mantle, whereas the middle- and late-stage primary magmas resulted from lower degrees of partial melting of a deeper part of the asthenospheric mantle. The early-stage HMA magma was generated by partial melting of the remnant subcontinental lithospheric mantle composed of refractory peridotite. This melting might have resulted from an increased geothermal gradient caused by upwelling of hot asthenosphere.     

Endogenous growth of a Miocene submarine dacite cryptodome, Rebun Island, Hokkaido, Japan

Momo-iwa, Rebun Island, Hokkaido, Japan, is a dacite cryptodome 200–300 m across and 190 m high. The dome is inferred to have intruded wet, poorly consolidated sediment in a shallow marine environment. The internal structure of the dome is concentric, with a massive core, banded rim, and narrow brecciated border, all of which are composed of compositionally uniform feldspar-phyric dacite. Boundaries between each of the zones are distinct but gradational. The massive core consists of homogeneous coherent (unfractured) dacite and is characterized by radial columnar joints 60–200 cm across. The banded rim encircles the massive core and is 40 m wide. It is characterized by large-scale flow banding parallel to the dome surface. The flow banding comprises alternating partly crystalline and more glassy bands 80–150 cm thick. The outermost brecciated border is up to 80 cm thick, and consists of in situ breccia and blocky peperite. The in situ breccia comprises polyhedral dacite clasts 5–20 cm across and a cogenetic granular matrix. The blocky peperite consists of polyhedral dacite clasts 0.5–2 cm across separated by the host sediment (mudstone). The internal structures of the dome suggest endogenous growth involving a continuous magma supply during a single intrusive phase and simple expansion from the interior. Although much larger, the internal structures of Momo-iwa closely resemble those of lobes in subaqueous felsic lobe-hyaloclastite lavas.     

Partitioning of elements between majorite garnet and melt and implications for petrogenesis of komatiite

Partitioning of elements between majorite garnet and ultrabasic melt has been studied at 16 GPa and 1950° C. Ca, Ti, La, Sm, Gd, Zr, Hf, Fe, Ni, Mn, K, and Na are enriched in the melt, whereas Al, Cr, V, Sc and Yb are concentrated in majorite garnet. Thus, majorite garnet fractionation by partial melting could produce chemical heterogeneities in these elements deviating from chondritic abundance. Using the partitioning behaviour of elements between majorite garnet and ultrabasic melt, the petrogenesis of komatiite is discussed. A simple model to explain the chemical varieties of komatiites is as follows. Aluminadepleted komatiite was generated by partial melting of the primitive mantle at 200–650 km depth, and alumina-enriched komatiite is the product of remelting of the residual solid at the same depths, whereas alumina-undepleted komatiite was formed by partial melting of the primitive upper mantle at depths shallower than 200 km. We suggest the possibility of large-scale chemical layering or heterogeneity in the early Archean upper mantle as an alternative model for komatiite genesis; shallower mantle depleted in majorite garnet and the underlying mantle enriched in majorite garnet. Alumina-depleted and alumina-enriched komatiites in the early Archean might be generated by a high degree of partial melting of the layered mantle. Such chemical layering could have been homogenized by the late Archean. This explains the observations that alumina-depleted and alumina-enriched komatiites were generally formed in the early Archean but alumina-undepleted komatiite was erupted in the late Archean.     

Paleoposition of Southwest Japan at 16 Ma: Implication from paleomagnetism of the Miocene Ichishi Group

New paleomagnetic data from shallow-marine sediments of the Ichishi Group suggest a clockwise tectonic rotation of Southwest Japan in the Middle Miocene. Samples have been collected from mud or tuff layers at 17 sites. Stability of remanent magnetization has been examined by using alternating field and thermal demagnetization. The polarity sequence, composed of four normal and seven reversed polarity sites, is correlated to Polarity Epoch 16 (15.2–17.6 Ma), based on micropaleontological assignment of the upper Ichishi Group to Blow's Zone N8. The mean paleomagnetic direction of the 11 sites shows an anomalous declination toward the northeast. This result suggests that Southwest Japan was subjected to a clockwise rotation through 45° since 16 Ma. The clockwise rotation can be explained by the drift of Southwest Japan associated with the spreading of the Japan Sea during the Middle Miocene.     

The Higo metamorphic complex in Kyushu, Japan as the fragment of Permo–Triassic metamorphic complexes in East Asia

The Higo terrane in west-central Kyushu Island, southwest Japan consists from north to south of the Manotani, Higo and Ryuhozan metamorphic complexes, which are intruded by the Higo plutonic complex (Miyanohara tonalite and Shiraishino granodiorite).The Higo and Manotani metamorphic complexes indicate an imbricate crustal section in which a sequence of metamorphic rocks with increasing metamorphic grade from high (northern part) to low (southern part) structural levels is exposed. The metamorphic rocks in these complexes can be divided into five metamorphic zones (zone A to zone E) from top to base (i.e., from north to south) on the basis of mineral parageneses of pelitic rocks. Greenschist-facies mineral assemblages in zone A (the Manotani metamorphic complex) give way to amphibolite-facies assemblages in zones B, C and D, which in turn are replaced by granulite-facies assemblages in zone E of the Higo metamorphic complex. The highest-grade part of the complex (zone E) indicates peak P–T conditions of ca. 720 MPa and ca. 870 °C. In addition highly aluminous Spr-bearing granulites and related high-temperature metamorphic rocks occur as blocks in peridotite intrusions and show UHT-metamorphic conditions of ca. 900 MPa and ca. 950 °C. The prograde and retrograde P–T evolution paths of the Higo and Manotani metamorphic complexes are estimated using reaction textures, mineral inclusion analyses and mineral chemistries, especially in zones A and D, which show a clockwise P–T path from Lws-including Pmp–Act field to Act–Chl–Epi field in zone A and St–Ky field to And field through Sil field in zone D.The Higo metamorphic complex has been traditionally considered to be the western-end of the Ryoke metamorphic belt in the Japanese Islands or part of the Kurosegawa–Paleo Ryoke terrane in south-west Japan. However, recent detailed studies including Permo–Triassic age (ca. 250 Ma) determinations from this complex indicate a close relationship with the high-grade metamorphic terranes in eastern-most Asia (e.g., north Dabie terrane) with similar metamorphic and igneous characteristics, protolith assembly, and metamorphic and igneous ages. The north Dabie high-grade terrane as a collisional metamorphic zone between the North China and the South China cratons could be extended to the N-NE along the transcurrent fault (Tan-Lu Fault) as the Sulu belt in Shandong Peninsula and the Imjingang belt in Korean Peninsula. The Higo and Manotani metamorphic complexes as well as the Hida–Oki terrane in Japan would also have belonged to this type of collisional terrane and then experienced a top-to-the-south displacement with forming a regional nappe structure before the intrusion of younger Shiraishino granodiorite (ca. 120 Ma).     

Isotopic equilibration ages for the Miyanohara tonalite from the Higo metamorphic belt in central Kyushu, Southwest Japan: Implications for the tectonic setting during the Triassic

Abstract Miyanohara tonalite occurs in the middle part of the Higo metamorphic belt in the central Kyushu, Southwest Japan. This tonalite intrudes into early Permian Ryuhozan metamorphic rocks in the south and is intruded by Cretaceous Shiraishino granodiorite in the north. The Miyanohara tonalite yielded three mineral ages: (i) 110–100 Ma for Sm–Nd and Rb–Sr internal isochrons and for K–Ar hornblende; (ii) 183 Ma for Sm–Nd internal isochron; and (iii) 211 Ma for Sm–Nd internal isochron. The ages of 110–100 Ma may indicate cooling age due to the thermal effect of the Shiraishino granodiorite intrusion. The ages of 183 Ma and 211 Ma are consistent with timing of intrusion of the Miyanohara tonalite based on geologic constraints. The hornblende in the sample which gave 183 Ma shows discontinuous zoning under microscope, whereas the one which gave 211 Ma does not show zonal structure. These mineralogical features suggest that the 183 Ma sample has suffered severely from later tectonothermal effect compared with the 211 Ma sample. Therefore, the age of 211 Ma is regarded as near crystallization age for the Miyanohara tonalite. The magmatic process, geochronology and initial Sr and Nd isotope ratios for the Miyanohara tonalite are similar to those of early Jurassic granites from the Outer Plutonic Zone of the Hida belt that constitutes a marginal part of east Asia before the opening of the Japan Sea. Intrusion of the Miyanohara tonalite is considered to have taken place in the active continental margin during the late Triassic.     

The optical reflector system for the CANGAROO-II imaging atmospheric Cherenkov telescope

A new imaging atmospheric Cherenkov telescope with a light-weight reflector has been constructed. Light, robust, and durable mirror facets of containing carbon fiber reinforced plastic laminates were developed for the telescope. The reflector has a parabolic shape (f/1.1) with a 30 m² surface area, which consists of 60 spherical mirror facets. The image size of each mirror facet is 0°.08 (FWHM) on average. The attitude of each facet can be adjusted by stepping motors. After the first in situ adjustment, a point image of about 0°.14 (FWHM) over 3° field of view was obtained. The effect of gravitational load on the optical system was confirmed to be negligible at the focal plane. The telescope has been in operation with an energy threshold for γ-rays of 300 GeV since May 1999.     

The missing half of the subduction factory: shipboard results from the Izu rear arc,IODP Expedition 350

IODP Expedition 350 was the first to be drilled in the rear part of the Izu-Bonin, although several sites had been drilled in the arc axis to fore-arc region; the scientific objective was to understand the evolution of the Izu rear arc, by drilling a deep-water volcaniclastic section with a long temporal record (Site U1437). The Izu rear arc is dominated by a series of basaltic to dacitic seamount chains up to ~100-km long roughly perpendicular to the arc front. Dredge samples from these are geochemically distinct from arc front rocks, and drilling was undertaken to understand this arc asymmetry. Site U1437 lies in an ~20-km-wide basin between two rear arc seamount chains, ~90-km west of the arc front, and was drilled to 1804 m below the sea floor (mbsf) with excellent recovery. We expected to drill a volcaniclastic apron, but the section is much more mud-rich than expected (~60%), and the remaining fraction of the section is much finer-grained than predicted from its position within the Izu arc, composed half of ashes/tuffs, and half of lapilli tuffs of fine grain size (clasts <3 cm). Volcanic blocks (>6.4 cm) are only sparsely scattered through the lowermost 25% of the section, and only one igneous unit was encountered, a rhyolite peperite intrusion at ~1390 mbsf. The lowest biostratigaphic datum is at 867 mbsf (~6.5 Ma), the lowest palaeomagnetic datum is at ~1300 mbsf (~9 Ma), and the rhyolite peperite at ~1390 mbsf has yielded a U–Pb zircon concordia intercept age of (13.6 + 1.6/?1.7) Ma. Both arc front and rear arc sources contributed to the fine-grained (distal) tephras of the upper 1320 m, but the coarse-grained (proximal) volcaniclastics in the lowest 25% of the section are geochemically similar to the arc front, suggesting arc asymmetry is not recorded in rocks older than ~13 Ma.