初始应力各向异性土的弹塑性模型

剑桥模型沿球应力轴(p 轴)等向塑性体变硬化; 在日本广泛采用的关口 — 太田模型沿初始固结线( K0 线)不等向塑性体变硬化。三轴试验数据表明: 自 K0 状态向伸长方向剪切时, 前者方法计算的体积应变偏小, 而后者方法计算的体积应变偏大。 作者提出一种介于上述两者之间 、考虑初始应力各向异性(如 K0 固结)的不等向塑性体变硬化弹塑性模型。 为了使模型在三维应力下较好地反映土的强度和变形特性, 模型的剪切屈服准则使用 SMP 准则。模型的土性参数与剑桥模型一样, 其预测值与粘土实测值的比较表明, 提出的模型是简单合理的, 可望在实际工程计算中得到使用。     

一个用于面板坝流变分析的堆石流变模型

在前人工作的基础上, 从宏观上建立了一个用于面板坝流变分析的堆石流变模型: 堆石的瞬时弹塑性变形由椭圆-抛物双屈服面模型确定,并计入时间效应, 由双曲线函数经验公式计算堆石与时间有关的粘塑性变形。通过现场实测结果的反分析验证了模型的可靠性。     

不容忽视的海洋负面效应——略论青岛的海洋灾害的防灾、减灾对策

论述了青岛地区历史上海洋灾害的灾情和灾种,并对防灾、减灾提出若干建议和对策。     

Petroleum Migration Direction of the Silurian Paleo-pools in the Tarim Basin, Northwest China

The results obtained in this paper indicate that carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has a high concentration and complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in studying petroleum migration of paleo-pool. During the basin＇s first-stage of oil-gas pool formation in the Silurian in Tazhong and Tabei areas of Tarim Basin （at the end of Silurian period） and the second-stage in the Awati area （in Permian）, the petroleum experienced a long-distance migration. During the formation of the Silurian paleo-pools in Tazhong Uplift at the end of Silurian, the petroleum mainly came from the lower and middle Cambrian source rocks in the Manjiaer sag. The petroleum migrated towards the southwest-south entering the Silurian reservoir beds in Tazhong first. Then, it further migrated within Silurian from northwest to southeast along the highs of the Structural Belts to the region of the Silurian pinchout boundary in Tazhong. In Tabei Uplift, during the first-stage of pool formation, the petroleum was also from the lower and middle Cambrian source rocks in the Manjiaer sag. It migrated northwest entering the Silurian reservoir beds in the Tabei Uplift firstly, and then the migration continued in the same direction within the Silurian reservoirs and finally the petroleum was trapped in higher positions. During the second-stage pool formation in the Silurian beds in the areas around Awati sag, the petroleum mainly came from the lower-middle Cambrian source rocks in the Awati sag. The petroleum migrated from the generation center to Silurian reservoirs in all directions around the sag through major paths, and the petroleum was finally trapped in higher locations.     

Application of Gaussian Weight to Improve Perturbation Features of Convection-Permitting Ensemble Forecast Based on Local Breeding of Growing Modes

Local breeding of growing modes(LBGM) is a method used to generate initial condition perturbation(ICP) for convection-permitting ensemble forecasts. Equal weights(EWs) are usually presumed in LBGM during the localization of ICP, without considering different contributions of the grid points within the local radius. To address this problem, Gaussian weights(GWs) are proposed in this study, which can accommodate the varied influences of the grids inside the local radius on the central grid through a Gaussian function. Specifically, two convection-permitting ensemble forecast experiments based on LBGM with GWs and EWs are compared and analyzed respectively for two squall line cases. The results showed that the use of the GWs intensified the local characteristics of the ICP and made the distribution of the ICP fields more flow-dependent. Kinetic energy spectrum of the ICP indicated that there could be more large-scale information in the ICP by using the GWs. In addition, mesoscale information also improved slightly. For forecast of nonprecipitation variables, GWs improved the relationship between the root-mean-square error and the spread and contributed to the forecasting accuracy of wind, temperature, geopotential height, and humidity. For the precipitation forecast, GWs simulated the precipitation structure successfully and provided better probability forecasting during the evolution of the two squall line processes than the EWs.     

Ablation Characteristic of Ilmenite using UV Nanosecond and Femtosecond Lasers: Implications for Non‐Matrix‐Matched Quantification

Ilmenite (FeTiO₃) is a common accessory mineral and has been used as a powerful petrogenetic indicator in many geological settings. Elemental fractionation and matrix effects in ilmenite (CRN63E‐K) and silicate glass (NIST SRM 610) were investigated using 193 nm ArF excimer nanosecond (ns) laser and 257 nm femtosecond (fs) laser ablation systems coupled to an inductively coupled plasma‐mass spectrometer. The concentration‐normalised ⁵⁷Fe and ⁴⁹Ti responses in ilmenite were higher than those in NIST SRM 610 by a factor of 1.8 using fs‐LA. Compared with the 193 nm excimer laser, smaller elemental fractionation was observed using the 257 nm fs laser. When using 193 nm excimer laser ablation, the selected range of the laser energy density had a significant effect on the elemental fractionation in ilmenite. Scanning electron microscopy images of ablation craters and the morphologies of the deposited aerosol materials showed more melting effects and an enlarged particle deposition area around the ablation site of the ns‐LA‐generated crater when compared with those using fs‐LA. The ejected material around the ns crater predominantly consisted of large droplets of resolidified molten material; however, the ejected material around the fs crater consisted of agglomerates of fine particles with ‘rough' shapes. These observations are a result of the different ablation mechanisms for ns‐ and fs‐LAs. Non‐matrix‐matched calibration was applied for the analysis of ilmenite samples using NIST SRM 610 as a reference material for both 193 nm excimer LA‐ICP‐MS and fs‐LA‐ICP‐MS. Similar analytical results for most elements in ilmenite samples were obtained using both 193 nm excimer LA‐ICP‐MS at a high laser energy density of 12.7 J cm^?2 and fs‐LA‐ICP‐MS.     

大别山超高压变质岩带氦同位素组成和某些微量元素分布

报导了大别山超高压变质岩带不同岩岩类型及六安－蔡河地学剖面中氦同位素和某些微量元素的分配分布特征，并讨论了它们的影响因素及其地质意义。     

我国电气石矿床类型及其地质特征

在研究我国电气石矿产产出地质环境、成矿地质过程和电气石矿物组分特征的基础上,总结了我国电气石矿产成矿类型：花岗伟晶岩型、岩浆热液型、火山次火山热液型、热水沉积型和表生残积砂矿型。并阐述了各类型电气石矿床类型产出的时代、成矿地质特征和电气石矿物化学特征。     

博格达山晚石炭纪造山活动的变形地质记录

主要由钙碱性火山岩、火山碎屑岩组成的博格达古岛弧是天山缝合造山带的重要组成部分 ,是一个发育较成熟的山链 ,其演化经历了晚古生代的韧性剪切收缩 ;中生代伸展调整及新生代再造山过程。晚古生代的造山活动在博格达山有很好的地质记录 ,并以显著的韧性剪切变形带的形成和发育同造山的褶皱构造为特点。剪切变形带内同构造的石英脉中的锆石U PbSHRIMP测年结果与山链中花岗岩、辉长岩年龄颇为一致 (311～ 316Ma) ,这个年龄反映在结束洋盆散聚、碰撞焊接的晚华力西期造山过程中 ,博格达古岛弧内存在一次虽不甚强烈 ,但又较为明显的构造岩浆事件 ,其成因可能与引起石炭纪大规模裂陆式喷发的深部断裂构造重新活动有关。     

西昆仑山古近纪隆升变形：时间、证据和争论

西昆仑山新生代隆升变形过程对于中亚的地貌与水系演化、资源和能源矿产分布、气候及环境变迁等都具有重要的影响,然而至今尚没有形成统一的认识。西昆仑山新生代初始隆升与变形的时间存在三种不同观点,分别为古新世、中—晚始新世、渐新世末期—中新世早期。本文通过对塔西南地区地层学、沉积学、物源分析和热年代学的研究综述,详细讨论了西昆仑山古新世、中—晚始新世隆升变形的时间、证据、解释和争议。在此基础上,确定了西昆仑山在古新世发生了隆升变形,中—晚始新世是新生代变形中的一个加速节点。这两期隆升变形分别对应于印度—亚洲大陆初始碰撞、新特提斯洋俯冲板片断离的远程响应,反映了印度板块向北的碰撞拼贴与持续挤压的过程。