A fast method of flood discharge estimation

Discharge, especially during flood periods, is among the most important information necessary for flood control, water resources planning and management. Owing to the high flood velocities, flood discharge usually cannot be measured efficiently by conventional methods, which explains why records of flood discharge are scarce or do not exist for the watersheds in Taiwan. A fast method of flood discharge estimation is presented. The greatest advantage of the proposed method is its application to estimate flood discharge that cannot be measured by conventional methods. It has as its basis the regularity of open‐channel flows, i.e. that nature maintains a constant ratio of mean to maximum velocities at a given channel section by adjusting the velocity distribution and the channel geometry. The maximum velocity at a given section can be determined easily over a single vertical profile, which tends to remain invariant with time and discharge, and can be converted to the mean velocity of the entire cross‐section by multying by the constant ratio. Therefore the mean velocity is a common multiple of maximum velocity and the mean/maximum velocity ratio. The channel cross‐sectional area can be determined from the gauge height, the water depth at the y‐axis or the product of the channel width multiplied by the water depth at the y‐axis. Then the most commonly used method, i.e. the velocity–area method, which determines discharge as the product of the cross‐sectional area multiplied by mean velocity, is applied to estimate the flood discharge. Only a few velocity measurements on the y‐axis are necessary to estimate flood discharge. Moreover the location of the y‐axis will not vary with time and water stage. Once the relationship of mean and maximum velocities is established, the flood estimation can be determined efficiently. This method avoids exposure to hazardous environments and sharply reduces the measurement time and cost. The method can be applied in both high and low flows in rivers. Available laboratory flume and stream‐flow data are used to illustrate accuracy and reliability, and results show that this method can quickly and accurately estimate flood discharges. Copyright © 2004 John Wiley & Sons, Ltd.     

Seismic isolation of rigid cylindrical tanks using friction pendulum bearings

Storage tanks are vulnerable to earthquakes, as numerous major earthquakes have demonstrated. The trend of recent revisions to make seismic design criteria for large‐scale industrial storage tanks increasingly stringent has made development of cost‐effective earthquake‐resistant design and retrofit techniques for industrial tanks imperative. This study assesses the feasibility of seismic base isolation for making liquid‐filled storage tanks earthquake resistant. The sliding‐type friction pendulum seismic (FPS) bearings are considered rather than the elastomeric bearings because the dynamic characteristics of an FPS‐isolated tank remain unchanged regardless of the storage level. This work has devised a hybrid structural‐hydrodynamic model and solution algorithm, which would permit simple, accurate and efficient assessment of the seismic response of rigid cylindrical storage tanks in the context of seismic isolation. Extensive numerical simulations confirm the effectiveness of seismic base isolation of rigid cylindrical tanks using FPS bearings. Copyright © 2001 John Wiley & Sons, Ltd.     

对研制云南山地水土流失动态监测系统的初步尝试

采用基于3S技术的定量遥感方法，对1998年和1999年金沙江一级支流龙川江上游小流域进行了水土流失动态监测和防治决策分析。结果表明，1999年为涝年，侵蚀总量高达869008.97t，强度及其以上侵蚀级别的侵蚀量占总量的86．39％，侵蚀模数平均为7703.87t/km^2。1998年为旱年，流失情况较1999年的轻微。1999年中度及其以上侵蚀级别的侵蚀面积占流失总面积的32．41％，而1998年只占26．09％。1999年需要治理和急需治理的面积占侵蚀总面积的15．45％和0．82％，而998年的治理面积较低。本研究采用的技术在国内具有先进性和快速，准确，经济等优点，在云南山地有广阔的运用推广前景。     

Interference effect of two closely-spaced shallow strip foundations on geogrid-reinforced sand

Summary Geotextiles and geogrids are now being used extensively in many civil engineering construction works. This study presents some laboratory model test results for the ultimate bearing capacity of an isolated, and two closely-spaced, strip foundations resting on unreinforced sand, and sand reinforced with layers of geogrid. Based on the model test results, the variation of the group efficiency with the centre-to-centre spacing of the foundation has been determined.     

Application of Persistent Scatterer Interferometry (PSI) in monitoring slope movements in Nainital,Uttarakhand Lesser Himalaya,India

Orogenic movements and sub-tropical climate have rendered the slopes of the Himalayan region intensely deformed and weathered. As a result, the incidences of slope failure are quite common all along the Himalayan region. The Lesser Himalayan terrane is particularly vulnerable to mass-movements owing to geological fragility, and many parts of it are bearing a high-risk of associated disaster owing to the high population density. An important step towards mitigation of such disasters is the monitoring of slope movement. Towards this, the Persistent Scatterer Interferometry (PSI) technique can be applied. In the present study, the PSI technique is employed in Lesser Himalayan town of Nainital in Uttarakhand state of India to decipher and monitor slope movements. A total of 15 multi-date ENVISAT ASAR satellite images, acquired during August 2008 to August 2010 period, were subjected to PSI, which revealed a continuous creep movement along the hillslopes located towards the eastern side of the Nainital lake. The higher reaches of the hill seem to be experiencing accelerated creep of \({\sim }21\) mm/year, which decreases downslope to \({\sim }5\) mm/year. Based on spatial pattern of varying PSI Mean LOS Velocity (MLV) values, high (H), moderate (M), low (L) and very low (S) creeping zones have been delineated in the hillslopes. Given the long history of mass movements and continuously increasing anthropogenic activities in Nainital, these results call for immediate measures to avert any future disaster in the town.     

Australasian microtektites in the South China Sea and the West Philippine Sea: Implications for age,size, and location of the impact crater

Abstract— Microtektites from two deep‐sea cores in the South China Sea and the West Philippine Sea are identified as belonging to the Australasian tektite strewn field based on the morphology, chronostratigraphic occurrence, and geographical location of these microtektites. The higher concentrations of microtektites (>1000/cm²) in the marginal seas of the western Pacific, with the peak concentration in the South China Sea, support the hypothesis of a large impact crater in Indochina. These two new occurrences lead to a more precise dating of the impact event at 793 ka, whereas the size of the Australasian source crater on the Indochina Peninsula is estimated to be 90–116 km.     

Precast concrete wall with end columns (PreWEC) for earthquake resistant design

An innovative seismic resisting system consisting of a Pre cast W all with E nd C olumns (or PreWEC) has been developed, and its performance has been verified using large‐scale cyclic testing. The wall and end columns in the PreWEC system are anchored individually to a foundation using unbonded post‐tensioning. A newly designed, low‐cost mild steel connector is used to connect the wall and end columns horizontally along the vertical joint. The connectors are easily replaceable and provide additional hysteretic energy dissipation to the system. The PreWEC system can be economically designed to have a lateral load carrying capacity similar to that of a comparable reinforced concrete wall, while minimizing damage and providing self‐centering capability. In addition to confirming these benefits, the large‐scale test demonstrated that the PreWEC system: (i) would provide superior seismic performance compared to other currently available structural wall systems especially for the precast industry; and (ii) meets all the mandatory acceptance criteria established by the American Concrete Institute (ACI) for special unbonded post‐tensioned precast structural walls and building frame special reinforced concrete shear wall systems, as defined in the American Concrete Society of Civil Engineers (ASCE) 7‐05. Copyright © 2015 John Wiley & Sons, Ltd.     

关于在基础设施抗震规范中规定最低设防要求的一点建议

作者针对目前我国基础设施抗震设计时遇到的问题,给出了以下建议:①根据地震作用水平,对结构不同部位、不同构件制定不同的设计目标,明确设计构件所用的强度、延性参数指标;②我国地震动区划图提供的地震动参数仅仅是中震水平(地震重现期475年),实际发生的地震可能远远超过中震水平,在基础设施设计时应对大震(罕遇地震)有所考虑,甚至应考虑超预期地震发生后的应对、应急措施;③提高最低设防水准,并非是提高一度设防,应通过确定最小地震动参数满足最低设防要求,并在地震动区划图中以地震重现期代表地震危险程度;④对于Ⅵ度以下设防地区的基础设施结构物,都应按照Ⅵ度设防标准设计并考虑采取相应的抗震措施.     

Pollution Source Investigation and Water Quality Management in the Carp Lake Watershed,Taiwan

In this study, a full survey of pollutant sources and water quality was conducted, followed by the application of a water quality model (Water Quality Analysis Simulation Program, WASP) to establish strategies of water quality control in Carp Lake, Taiwan. Results of the field investigation show that both point and non‐point source (NPS) pollutants were responsible for the poor water quality. The contributions of biochemical oxygen demand (BOD) from point source and NPS pollution were 45.9 and 55.1%, respectively. About 80% of total phosphorus (TP) were contributed by NPS. Additionally, point source and NPS pollution discharged 55.5 and 44.5% of NH₃–N load, respectively. The Carlson's Trophic State Index ranged from 61.9 to 69.2 showing serious eutrophic problems in Carp Lake. The calculated BOD, NH₃–N, and TP carrying capacity were approximately 2.8, 0.42, and 0.15 kg per day, respectively. However, the current pollutant loadings are approximately 3.0–5.5 times the calculated carrying capacity. With the help of the calibrated WASP model, remedial strategies for the lake water from short‐term to long‐term were developed. The completion of the small local sewer system to remove 80% of the point source pollution can serve as a short‐term goal while 40–60% of NPS removal by natural treatment systems may serve as a mid‐term goal. Furthermore, 80% of both source point and NPS pollution removal can be considered as a long‐term strategy. Results of heavy metal analysis show that the enriched sediment would be safe for agricultural applications.