Formation blockage risk analysis of geothermal water reinjection:Rock property analysis,pumping and reinjection tests,and long-term reinjection prediction

The blockage induced by particle migration and deposition is one of the main reasons for the decrease of reinjection capacity in the porous geothermal reservoir with a low and medium temperature.In this paper,a new drilled geothermal well in Xining basin China is taken as an example to investigate the formation blockage risk due to the movable clay and sand particles in pores.The physical properties of the reservoir rocks were analyzed,a series of pumping and reinjection tests were conducted,and the longterm reinjection performance of the well was predicted by numerical simulation based on the test fitting.The results show that the geothermal reservoir rocks are argillaceous and weakly cemented sandstones with a content of movable clay and sand particles up to 0.18–23.42 wt.%.The well presented a high productivity of 935–2186 m3?d-1 at a pressure difference of 0.7–1.62 MPa in the pumping tests associated with a large amount of clay and sand particles produced out,while in the reinjection test,only a low injectivity of 240–480 m3?d-1 was observed at an injection pressure of 0.2–0.6 MPa with the clay and sand particles near the wellbore move into deep.According to the prediction,under conditions of a blockage risk,the injectivity of the well will start to decline after 100 days of injection,and in the third year,it will decrease by 59.00%–77.09%.The influence of invasion of pretreated suspended particles and scale particles can be neglected.Under conditions of a high blockage risk,the injectivity of the well will decrease significantly in the first 20–30 days,with a decline of 75.39%–78.96%.Generally,the higher the injection pressure or rate,the greater the decrease in injectivity of the well caused by particle blockage.Pump lifting is an effective measure to remove the well blockage which can be used regularly.     

The influence of the surroundings on the morphology of galaxies

The characteristics of galaxies within galaxy groups are investigated as a function of the surroundings. It is shown that the relative number of the galaxies with different morphological type is correlated with the number of members within the group, but the fraction of E+S0 galaxies does not depend on the mean-pairwise distance between the galaxies, the density of the luminous matter as well as the velocity dispersion in the group.     

陕西地区地震动衰减关系研究

通过分析陕西省丰富的地震活动资料,包括鲜明的地震活动与震害分布的地域性特点以及地震地质环境特点,将陕西省分为三个分区,来进行地震动衰减关系的研究.研究内容主要包括地震烈度衰减关系和基岩地震动衰减关系.选择美国西部作为参考区,三个分区分别作为研究区,采用可逆法进行映射转换计算,得到了三个分区的基岩地震动衰减关系,在转换过...     

胶东焦家金矿带招贤金矿床的原位黄铁矿热电性特征及找矿指示意义

胶东金矿集区是中国最大的黄金产地,焦家金矿带是重要的成矿亚带之一,产出了一系列超大型、大型金矿床,资源量占整个胶东地区的1/4,招贤金矿床为焦家带深部的大型金矿床。对招贤金矿床深部成矿潜力的评价可为焦家金矿带乃至胶东地区的金矿床深部找矿预测提供科学依据。文章选取了招贤金矿床3个钻孔6个不同标高的矿石样品,进行了详细的矿物学、成矿元素以及黄铁矿热电性特征研究。通过扫描电镜及半定量成分分析,鉴别了银金矿是主要的金矿物,常以包体的形式赋存于黄铁矿中或其裂隙中。金矿床围岩蚀变分带明显,显示了较强的矿化作用,其矿物共生组合和多阶段的成矿特征与胶东其他超大型金矿床相似。通过Au等成矿元素分析,笔者认为Au及其相关性高的元素具有规律性的垂向变化特征,元素沉淀具有垂向间断性。利用原位黄铁矿热电性测试方法,精准测定了黄铁矿热电性参数,并通过热电系数离散程度、热电性导型、形成温度、延伸指数等计算分析,综合讨论了金矿床成矿潜力,认为招贤金矿床及焦家金成矿带的深部具有较好的找矿前景。     

盆地地史模拟述评

论述了盆地地史模拟的一般研究方法，认为回剥法是现今重建盆地沉积史与构造史最精确的方法详细讨论了地坟实校正、不整合处理和构造沉隆分析等主要数学模型及其适用范围；并在介绍地史模拟研究历史和研究现状的基础上，指出了地史模拟的发展方向。     

湖南省主要内生成矿事件的构造格局控矿特征及动力机制

湖南省内生矿产资源丰富,内生成矿事件主要有加里东期(以志留纪为主)、印支晚期(晚三叠世)、燕山中晚期(晚侏罗世-早白垩世)等3期。以区域矿产资料为基础,结合大地构造、成岩成矿年龄、矿床成因机制等研究成果,对上述3期内生成矿事件的构造格局控矿特征和动力机制进行探讨。①受加里东运动自东南向西北扩展以及深部岩石圈结构差异控制,加里东期湖南省自东南往西北分为成矿特征有别的3个构造带。湘中-湘东南构造岩浆带(Ⅰ)发生后碰撞花岗质岩浆活动,于局部产生与岩浆活动相关的W、萤石等成矿作用;雪峰构造带(Ⅱ)东部的雪峰冲断带(Ⅱ1)形成了以构造活化成因为主的金矿和锑金矿;雪峰构造带(Ⅱ)西部的武陵低缓褶皱带(Ⅱ2)及湘西北构造抬升带(Ⅲ)内形成了与寒武纪同沉积断裂活动、加里东运动后的伸展活动以及相应的热液活动有关的汞铅锌矿。②印支晚期受深部岩石圈结构差异控制,湖南省自东南至西北分为3个构造带:湘中-湘东南构造岩浆带(Ⅰ)因后碰撞减压熔融而发生大规模花岗质岩浆活动,从而于其东南部形成钨锡铅锌多金属矿床,西北部形成锑金钨多金属矿床;雪峰构造带(Ⅱ)可能无内生热液成矿作用;湘西北褶皱带(Ⅲ)发育小型脉型铅锌矿。③燕山中晚期,湖南省自东南往西北分为3个构造带:湘中-湘东构造岩浆带(Ⅰ)受岩石圈拆沉、软流圈上隆、陆内碰撞后期增温减压、俯冲板块崩塌等深部构造作用控制而发生大规模花岗质岩浆活动,形成了大量的有色金属矿床和金矿床;雪峰西部构造带(Ⅱ)成矿作用弱,局部存在Au、Hg成矿作用;湘西北褶皱带(Ⅲ)发育少量低温热液充填型萤石矿和砷矿。     

涠西南凹陷流沙港组烃源岩生产力及发育模式

涠西南凹陷是中国近海北部湾盆地已证实的富烃凹陷,始新统流沙港组是该凹陷主要烃源岩层系.为深入认识涠西南凹陷流沙港组烃源岩的生产力和发育特征,采用有机地球化学与地球生物学相结合、定性分析与定量计算相结合的方法正演恢复了涠西南凹陷不同次洼流沙港组不同层段烃源岩的古生产力、有机质埋藏效率和有机碳埋藏生产力,进而建立了研究区流沙港组烃源岩形成的地球生物学模式.结果表明,涠西南凹陷流沙港组烃源岩的古生产力、有机质埋藏效率及有机碳埋藏生产力在横向不同次洼和纵向不同层段上均存在差异,横向上以B次洼最优,纵向上以流二段最高;涠西南凹陷流沙港组烃源岩发育超营养湖高埋藏效率高埋藏生产力、富营养湖中等埋藏效率中等埋藏生产力及富营养湖低埋藏效率低埋藏生产力3种代表性的地球生物学模式.     

Advanced glycation endproducts in 35 types of seafood products consumed in eastern China

Advanced glycation endproducts(AGEs) have been recognized as hazards in processed foods that can induce chronic diseases such as cardiovascular disease, diabetes, and diabetic nephropathy. In this study, we investigated the AGEs contents of 35 types of industrial seafood products that are consumed frequently in eastern China. Total fluorescent AGEs level and Nε-carboxymethyl-lysine(CML) content were evaluated by fluorescence spectrophotometry and gas chromatography-mass spectrometry(GC-MS), respectively. The level of total fluorescent AGEs in seafood samples ranged from 39.37 to 1178.3 AU, and was higher in canned and packaged instant aquatic products that were processed at high temperatures. The CML content in seafood samples ranged from 44.8 to 439.1 mg per kg dried sample, and was higher in roasted seafood samples. The total fluorescent AGEs and CML content increased when seafood underwent high-temperature processing, but did not show an obvious correlation. The present study suggested that commonly consumed seafood contains different levels of AGEs, and the seafood processed at high temperatures always displays a high level of either AGEs or CML.     

Extraction of basic trends of urban expansion in China over past 40 years from satellite images

If urban sprawl is to be avoided in China in the next ten years, it is not only crucial to understand the overall history, current status, and future trends of urban expansion there, but also these differences, and this is presently lacking. In this study, remotely sensed images with approximately 30 m spatial resolution were used to quantitatively assess the spatial and temporal patterns of urban expansion of 60 Chinese cities(1973–2013). Urban-expansion-process curves of the cities studied were drawn using annual expansion area as an indicator. Curve similarity analysis generated four basic process modes of urban expansion in China. These included cities that: 1) peaked around 2004 and then decelerated; 2) peaked around 2010 and then decelerated; 3) showed sustained acceleration, and 4) showed continued deceleration. Four basic process modes represented cities under different levels of development stage. Geographic location was found to be the most related characteristic to urban expansion process. Regional development policies at the national level in each region also showed highly temporal consistency with fluctuation characteristics of urban expansion process. Urban characteristic such as population size and administrative level were not found to be significantly related to urban expansion-process modes. Understanding the basic process-mode categories well is extremely important for future regional-balance planning and development of macroeconomic policies.