Microboudin structures of piemontite along the Sambagawa metamorphic belt, Japan: implications for lateral variation of differential stress during regional metamorphism

Evidence is presented of a lateral variation in differential stress during metamorphism along a regional metamorphic belt on the basis of the proportion of microboudinaged piemontite grains (p) in a quartz matrix in metacherts. It is proposed that p is a practical indicator of relative differential stress. Analysis of 123 metacherts from the 800 km long Sambagawa metamorphic belt, Japan, reveals that p‐values range from < 0.01 to 0.7 in this region. Most samples from Wakayama in the mid‐belt area have p‐values of 0.4–0.6, whereas those from western Shikoku have p‐values of < 0.1. This difference cannot be explained by variations in metamorphic temperature, and is instead attributed to a regional, lateral variation in differential stress during metamorphism.     

Oxygen isotope characteristics of chondrules from the Yamato‐82094 ungrouped carbonaceous chondrite: Further evidence for common O‐isotope environments sampled among carbonaceous chondrites

High‐precision secondary ion mass spectrometry (SIMS) was employed to investigate oxygen three isotopes of phenocrysts in 35 chondrules from the Yamato (Y) 82094 ungrouped 3.2 carbonaceous chondrite. Twenty‐one of 21 chondrules have multiple homogeneous pyroxene data (?¹⁷O 3SD analytical uncertainty: 0.7‰); 17 of 17 chondrules have multiple homogeneous pyroxene and plagioclase data. Twenty‐one of 25 chondrules have one or more olivine data matching coexisting pyroxene data. Such homogeneous phenocrysts (1) are interpreted to have crystallized from the final chondrule melt, defining host O‐isotope ratios; and (2) suggest efficient O‐isotope exchange between ambient gas and chondrule melt during formation. Host values plot within 0.7‰ of the primitive chondrule mineral (PCM) line. Seventeen chondrules have relict olivine and/or spinel, with some δ¹⁷O and δ¹⁸O values approaching ?40‰, similar to CAI or AOA‐like precursors. Regarding host chondrule data, 22 of 34 have Mg#s of 98.8–99.5 and ?¹⁷O of ?3.9‰ to ?6.1‰, consistent with most Acfer 094, CO, CR, and CV chondrite chondrules, and suggesting a common reduced O‐isotope reservoir devoid of ¹⁶O‐poor H₂O. Six Y‐82094 chondrules have ?¹⁷O near ?2.5‰, with Mg#s of 64–97, consistent with lower Mg# chondrules from Acfer 094, CO, CR, and CV chondrites; their signatures suggest precursors consisting of those forming Mg# ~99, ?¹⁷O: ?5‰ ± 1‰ chondrules plus ¹⁶O‐poor H₂O, at high dust enrichments. Three type II chondrules plot slightly above the PCM line, near the terrestrial fractionation line (?¹⁷O: ~+0.1‰). Their O‐isotopes and olivine chemistry are like LL3 type II chondrules, suggesting they sampled ordinary chondrite‐like chondrule precursors. Finally, three Mg# >99 chondrules have ?¹⁷O of ?6.7‰ to ?8.1‰, potentially due to ¹⁶O‐rich refractory precursor components. The predominance of Mg# ~99, ?¹⁷O: ?5‰ ± 1‰ chondrules and a high chondrule‐to‐matrix ratio suggests bulk Y‐82094 characteristics are closely related to anhydrous dust sampled by most carbonaceous chondrite chondrules.     

The most primitive mesosiderite Northwest Africa 1878, subgroup 0

All mesosiderites previously reported were subjected to thermal metamorphism and/or partial melting on the parent body. Therefore, their primordial features have been mostly lost. Here, we report detailed petrological and mineralogical features on a mesosiderite, Northwest Africa (NWA) 1878. This meteorite comprises silicate lithology and aggregates of small spheroidal Fe‐Ni metal grains. Silicate lithology typically shows igneous texture without recrystallization features, and mainly consists of low‐Ca pyroxene and plagioclase. Pyroxenes often show normal zoning. Exsolution lamella of augite is rarely noticed and very thin in width, compared with other mesosiderites. A few magnesian olivine grains are encountered without typical corona texture around them. They are not equilibrated with pyroxene on a large scale. Plagioclase shows a wide compositional range. These results show that NWA 1878 hardly experienced thermal metamorphism, distinguished from mesosiderites of subgroups 1–4. Therefore, we propose that this is classified as subgroup 0 mesosiderite. Nevertheless, NWA 1878 was locally subjected to secondary reactions, such as weak reduction of pyroxene and Fe‐Mg diffusion between olivine and pyroxene, on the parent body.     

Jurassic plume-origin ophiolites in Japan: accreted fragments of oceanic plateaus

The Mikabu and Sorachi–Yezo belts comprise Jurassic ophiolitic complexes in Japan, where abundant basaltic to picritic rocks occur as lavas and hyaloclastite blocks. In the studied northern Hamamatsu and Dodaira areas of the Mikabu belt, these rocks are divided into two geochemical types, namely depleted (D-) and enriched (E-) types. In addition, highly enriched (HE-) type has been reported from other areas in literature. The D-type picrites contain highly magnesian relic olivine phenocrysts up to Fo_93.5, and their Fo–NiO trend indicates fractional crystallization from a high-MgO primary magma. The MgO content is calculated as high as 25 wt%, indicating mantle melting at unusually high potential temperature (T _p) up to 1,650 °C. The E-type rocks represent the enrichment in Fe and LREE and the depletion in Mg, Al and HREE relative to the D-type rocks. These chemical characteristics are in good accordance with those of melts from garnet pyroxenite melting. Volcanics in the Sorachi–Yezo belts can be divided into the same types as the Mikabu belt, and the D-type picrites with magnesian olivines also show lines of evidence for production from high T _p mantle. Evidence for the high T _p mantle and geochemical similarities with high-Mg picrites and komatiites from oceanic and continental large igneous provinces (LIPs) indicate that the Mikabu and Sorachi–Yezo belts are accreted oceanic LIPs that were formed from hot large mantle plumes in the Late Jurassic Pacific Ocean. The E- and D-type rocks were formed as magmas generated by garnet pyroxenite melting at an early stage of LIP magmatism and by depleted peridotite melting at the later stage, respectively. The Mikabu belt characteristically bears abundant ultramafic cumulates, which could have been formed by crystal accumulation from a primary magma generated from Fe-rich peridotite mantle source, and the HE-type magma were produced by low degrees partial melting of garnet pyroxenite source. They should have been formed later and in lower temperatures than the E- and D-type rocks. The Mikabu and Sorachi Plateaus were formed in a low-latitude region of the Late Jurassic Pacific Ocean possibly near a subduction zone, partially experienced high P/T metamorphism during subduction, and then uplifted in association with (or without, in case of Mikabu) the supra-subduction zone ophiolite. The Mikabu and Sorachi Plateaus may be the Late Jurassic oceanic LIPs that could have been formed in brotherhood with the Shatsky Rise.     

Hydraulic properties of and pressure-head dynamics in thick pyroclastic-fall deposits in Atsuma,Northern Japan: implications for the role of water in shallow landslides induced by the 2018 Hokkaido Eastern Iburi Earthquake

Landslides - The 2018 Hokkaido Eastern Iburi Earthquake triggered numerous shallow landslides on slopes covered with thick pyroclastic-fall deposits. The landslides occurred more frequently on...     

南海张裂过程及其对晚中生代以来东南亚构造的启示——IODP建议书735-Full介绍

南海的形成揭示了大陆边缘张裂和盆地形成的复杂模式,尽管已经进行了广泛研究,但是关于基底岩石和深海盆沉积层的精确年代数据还很缺乏,这使得对南海张裂年代的估计存在很大的误差,对张裂机制和历史的各种假设没有得到验证.同时只有对南海的张裂过程有了精确地分析与刻画,才能更好地理解西太平洋边缘海盆地的形成以及它们在印支块体受印度-欧亚板块碰撞而向东南挤出、青藏高原隆升中可能起到的作用.2009年正式提交的国际综合大洋钻探计划(IODP)建议书735-Full建议在南海深海盆内的4个站位上实施钻探.这4个站位分布在南海盆地4个不同的次级构造单元上(南海东北部、西北次海盆、东部次海盆和西南次海盆),这样的站位设计会确保完成本建议书的整体研究目标,即揭示南海的张裂历史和它对晚中生代以来东南亚构造的启示.位于南海盆地最东北部的站位有助于确定该区域地壳的属性和验证古南海是否存在,位于西北次海盆的站住可能会提供南海的最早张裂年代,另外2个分别位于东部次海盆和西南次海盆的站位将重点确定2个次海盆的绝对年龄、基底矿物成分与磁化率以及2个次海盆的相对张裂次序.这些站位的水深大约在2 910～4 400 m,钻探深度预计到海底以下大约700～2 200 m,总的钻透深度为5 959 m,其中5 359 m穿透沉积层,另外600 m或400 m钻入基底.所有这些站位的位置是由已有的地球物理观测数据所确定,目前计划收集更多的地质与地球物理数据以满足IODP对井位调查数据的要求.     

Correlation of large displacement drained shear strength of landslide soils measured by direct shear and ring shear devices

Based on a laboratory study of drained direct shear tests of remoulded, pre-cut and polished specimens and drained ring shear tests of uncut and remoulded specimens of slip surface materials of five landslide soils, significant correlations of the mobilized shear strength parameters, cohesion (c, c _r) and internal friction angle (Φ, Φ_r), are proposed. The investigated soils consisted of the slip surface material belonging to tuffaceous clay, mudstone, loess and siltstone. Most of the previous studies on residual shear strength measured by reversal direct shear and ring shear devices have obtained significantly different results using the two devices, even when pre-cut and polished specimens were used in the direct shear device. In this study, the residual shear strength values of remoulded specimens measured by a ring shear device are shown to significantly correlate with the drained large displacement shear strength values of remoulded specimens, which were measured using pre-cut and polished specimens in a direct shear device. The correlation between the cohesion measured in the two shear devices is expressed by the linear relationship, $ {c_{\text{r}}} = 0.{7394}c - {6}.{6857} $ , while the correlation between the friction angle measured in the two devices is expressed by the linear relationship, $ {\Phi_{\text{r}}} = {1}.0{852}\Phi - {6}.0{247} $ . The proposed linear correlations for effective cohesion (c′) and effective friction angle (Φ′) have yielded significant coefficients of determination within an effective normal stress range of 30–150?kN/m².     

Strength and deformation behavior of the Shimanto accretionary complex across the Nobeoka thrust

A rapid reduction in sediment porosity from 60 to 70 % at seafloor to less than 10 % at several kilometers depth can play an important role in deformation and seismicity in the shallow portion of subduction zones. We conducted deformation experiments on rocks from an ancient accretionary complex, the Shimanto Belt, across the Nobeoka Thrust to understand the deformation behaviors of rocks along plate boundary faults at seismogenic depth. Our experimental results for phyllites in the hanging wall and shale‐tuff mélanges in the footwall of the Nobeoka Thrust indicate that the Shimanto Belt rocks fail brittlely accompanied by a stress drop at effective pressures < 80 MPa, whereas they exhibit strain hardening at higher effective pressures. The transition from brittle to ductile behavior in the shale–tuff mélanges lies on the same trend in effective stress–porosity space as that for clay‐rich and tuffaceous sediments subducting into the modern Nankai subduction zone. Both the absolute yield strength and the effective pressure at the brittle–ductile transition for the phyllosilicate‐rich materials are much lower than for sandstones. These results suggest that as the clay‐rich or tuffaceous sediments subduct and their porosities are reduced, their deformation behavior gradually transitions from ductile to brittle and their yield strength increases. Our results also suggest that samples of the ancient Shimanto accretionary prism can serve as an analog for underthrust rocks at seismogenic depth in the modern Nankai Trough.     

Anomalous change in atmospheric radon concentration sourced from broad crustal deformation: A case study of the 1995 Kobe earthquake

Before the Kobe earthquake, an anomalous increase in atmospheric Rn concentration was observed. By separating the measured concentration of atmospheric Rn into three components according to the distance from the monitoring station, the variation of Rn exhalation rate can be estimated for the respective area using the daily minimum and maximum concentrations. The mean rate of Rn exhalation gradually increased in an area of 20 km around the monitoring station, becoming five times higher than normal in the period between October 1994 and the date of the earthquake. This area had a large co-seismic displacement of up to 30 cm, which roughly corresponds to the crustal strain of 10⁻⁶-order, and it is considered the main source for the atmospheric Rn prior to the Kobe earthquake. Analyses revealed that the pre-seismic change in the atmospheric Rn concentration exhibited an anomalous pattern which would yield information on the spatial distribution of the mechanical response of the ground.     

Triaxial stress state deep in orogenic belts: an example from Turkey

A rare metachert pebble containing amphibole grains with microboudin structures in a wide range of orientations provides an opportunity to perform stress analysis in two orthogonal orientations on the foliation surface. The sample was analysed by the microboudin method to infer the triaxial stress state during microboudinage. Stress parameters proportional to the far-field differential stress were determined for sodic amphibole grains in the two orientations. The ratio of the stresses in the two orthogonal orientations (σ₁−σ₂)/(σ₁−σ₃) was calculated to be 0.64, indicating that σ₂ lies closer to the midpoint between σ₁ and σ₃ than to σ₃.