Photocatalytic degradation of spill oils on TiO(2) nanotube thin films

The nitrogen-doped TiO(2) nanotube (N-TNT) thin films were synthesized using ZnO nanorods as the template and doped with urea at 623K. Under ultraviolet (UV) and visible light irradiation, the efficiencies for photocatalytic degradation of methylene blue is as high as 30%. About 10% of toluene (representing aromatics in the spill oils) in sea water can be photocatalytically degraded under visible light radiation for 120 min. The aliphatic model compound (1-hexadecene) has, on the contrary, a less efficiency (8%) on the N-TNT photocatalyst. On the average, under visible light radiation, the effectnesses of the N-TNT for photocatalytic degradation of model compounds in the spill oils in sea water are 0.38 mg toluene/gN-TNTh and 0.25 mg 1-hexadecene/gN-TNTh. It is expected that spill oils in the harbors or seashores can be adsorbed and photocatalytically degraded on the N-TNT thin films that are coated onto levee at the sea water surface level.     

基于GIS泥石流二维数值模拟

为了模拟泥石流的运动规律,预测降雨诱发的泥石流到达距离和泛滥范围,减少和避免泥石流引起的灾害,给出了一个模拟泥石流运动的二维数值模型。由于GIS中的栅格网络数据可以直接作为有限差分的网格,二维数值模型可用有限差分来求解。模型应用于2003年7月20日发生在日本九州南部熊本县水俣市宝川区集村的泥石流。模拟再现了这个真实泥石流的传播和泛滥的过程,并与实际检测结果很吻合,验证了这个深度积分的二维数值模型的有效性和实用性。模型可用于预测泥石流的流动距离和泛滥范围,以及泛滥范围内的危险房屋和路段,也可以用于泥石流灾害的风险性分析。     

A GIS-based study toward forecast of suburban forest change

At a time when the concept of ‘human and environmental symbiosis’ has taken on much significance, protection of suburban forests (i.e. forests adjacent to or near developed areas) is a topic that has drawn much attention. Suburban forests have, since ancient times, been places where people have gathered firewood and cultured trees. As a result, the vegetation of suburban forests is only partially natural and continues to change as the forms of human activity in and around them changes. Accurate forecasts of how suburban forests will change are, therefore, an important element in the debate over how to protect them. In this study, a suburban forest was analyzed with laser radar sensing, multi-spectrum scanning, digital photogrammetry analysis, aerial photograph interpretation, and a field survey. Data gathered using these techniques were compiled on a GIS to forecast future changes in the forest. Aerial photographs taken over the past 50 years were analyzed to illuminate changes in the forest over that period. Specifically, comparisons of precise Digital Elevation Models (DEMs) measured by using digital photogrammetry workstations made it possible to estimate growth in forest height. The possible future conversion of such results to estimates of amounts of carbon dioxide consolidated by forests should be very significant for discussions of global environmental problems. This revised version was published online in July 2006 with corrections to the Cover Date.     

Redistribution and export of contaminated sediment within eastern Fukushima Prefecture due to typhoon flooding

Tropical cyclones expose river basins to heavy rainfall and flooding, and cause substantial soil erosion and sediment transport. There is heightened interest in the effects of typhoon floods on river basins in northeast Japan, as the migration of radiocaesium‐bearing soils contaminated by the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident will affect future radiation levels. The five main catchments surrounding FDNPP are the Odaka, Ukedo, Maeda, Kuma and Tomioka basins, but little quantitative modelling has been undertaken to identify the sediment redistribution patterns and controlling processes across these basins. Here we address this issue and report catchment‐scale modelling of the five basins using the GETFLOWS simulation code. The three‐dimensional (3D) models of the basins incorporated details of the geology, soil type, land cover, and used data from meteorological records as inputs. The simulation results were checked against field monitoring data for water flow rates, suspended sediment concentrations and accumulated sediment erosion and deposition. The results show that the majority of annual sediment migration in the basins occurs over storm periods, thus making typhoons the main vectors for redistribution. The Ukedo and Tomioka basins are the most important basins in the region in terms of overall sediment transport, followed by the other three basins each with similar discharge amounts. Erosion is strongly correlated with the underlying geology and the surface topography in the study area. A low permeability Pliocene Dainenji formation in the coastal area causes high surface water flow rates and soil erosion. Conversely, erosion is lower in an area with high permeability granite basement rocks between the Hatagawa and Futaba faults in the centre of the study area. Land cover is also a factor controlling differences in erosion and transport rates between forested areas in the west of the study area and predominantly agricultural areas towards the east. The largest sediment depositions occur in the Ogaki and Takigawa Dams, at the confluence of the Takase and Ukedo Rivers, and at the Ukedo River mouth. Having clarified the sediment redistribution patterns and controlling processes, these results can assist the ongoing task of monitoring radioactive caesium redistribution within Fukushima Prefecture, and contribute to the design and implementation of measures to protect health and the environment. Copyright © 2016 John Wiley & Sons, Ltd.     

Interpretation of Gravity and Gamma-Ray Spectrometry Data in Low Temperature Hydrothermal Systems,Southeastern Part of Fukuoka,Japan

The Hakata hot springs area is located in Fukuoka City, which is in the southwestern part of Japan. Gamma-ray and gravity surveys were conducted to understand the relationship between the low-temperature hydrothermal systems and geophysical data of the area. The depth of the reservoir basement, which was derived from gravity data, gradually deepens toward the east; it includes some steep depth gradients in the Hakata hot springs area. High intensities of gamma-rays were detected around these gradients. In addition, higher hot spring temperatures and flow rates can be observed in this area. These results indicate that some part of the level of the basement where the hot springs are concentrated is a part of the Kego Fault and is similar to the fracture zone created by past activities of the fault. Moreover, these steep depth gradients act as a path for hot spring water from the deeper side of the granitic body to the surface.     

Broadband ground-motion simulation of the 24 May 2014 Gokceada (North Aegean Sea) earthquake (Mw 6.9) in NW Turkey considering local soil effects

On 24 May 2014, a Mw 6.9 earthquake occurred in the west of Gokceada Island, northern Aegean Sea. The earthquake was close to Canakkale, Enez, Tekirdag cities, and damaged 300 buildings in the Marmara Region, NW Turkey. We simulated its broadband (0.1–10 Hz) ground motions including 1D deep and shallow structures soil amplification effects at the 12 strong ground motion stations in the western Marmara Region. The 1D deep velocity structures from the focal layer to the engineering bedrock with an S-wave velocity of 0.78 km/s in different azimuthal directions were tuned by comparing the observed group-velocity dispersion curves of Rayleigh and Love waves from the mainshock with theoretical ones. We also added the shallow parts from previous surveys into the 1D models. Synthetic seismograms on the engineering bedrock were generated using the discrete wave number method with a source model and the 1D deep velocity structures. Then the surface motion was generated considering shallow soil amplification. The synthetic seismograms are generally in good agreement with the observed low and high-frequency parts at most of the stations indicating an appropriateness of the source model and the 1D structural model.     

Exploration of S-wave velocity profiles at strong motion stations in Eskisehir,Turkey, using microtremor phase velocity and S-wave amplification

We have explored 1D S-wave velocity profiles of shallow and deep soil layers over a basement at strong motion stations in Eskisehir Province, Turkey. Microtremor array explorations were conducted at eight strong motion stations in the area to know shallow 1D S-wave velocity models. Rayleigh wave phase velocity at a frequency range from 3 to 30 Hz was estimated with the spatial autocorrelation analysis of array records of vertical microtremors at each station. Individual phase velocity was inverted to a shallow S-wave velocity profile. Low-velocity layers were identified at the stations in the basin. Site amplification factors from S-wave parts of earthquake records that had been estimated at the strong motion stations by Yamanaka et al. (2017) were inverted to the S-wave velocities and Q-values of the sedimentary layers. The depths to the basement with an S-wave velocity of 2.2 km/s are about 1 km in the central part of the basin, while the basement becomes shallow as 0.3 km in the marginal part of the basin. We finally discussed the effects of the shallow and deep sedimentary layers on the 1D S-wave amplification characteristics using the revealed profiles. It is found that the shallow soil layers have no significant effects in the amplification at a frequency range lower than 3 Hz in the area.     

Spatial distribution, diversity and composition of bacterial communities in sub-seafloor fluids at a deep-sea hydrothermal field of the Suiyo Seamount

Spatial distribution, diversity, and composition of bacterial communities within the shallow sub-seafloor at the deep-sea hydrothermal field of the Suiyo Seamount, Izu-Bonin Arc, Western Pacific Ocean, were investigated. Fluids were sampled from four boreholes in this area. Each borehole was located near or away from active vents, the distance ranging 2–40 m from active vents. In addition, fluids discharging from a natural vent and ambient seawater were sampled in this area. We extracted DNA from each sample, amplified bacterial 16S rRNA genes by PCR, cloned the PCR products and sequenced. The total number of clones analyzed was 348. Most of the detected phylotypes were affiliated with the phylum Proteobacteria, of which the detection frequency in each clone library ranged from 84.6% to 100%. The bacterial community diversity and composition were different between hydrothermal fluids and seawater, between fluids from the boreholes and the vent, and even among fluids from each borehole. The relative abundances of the phylotypes related to Thiomicrospira, Methylobacterium and Sphingomonas were significantly different among fluids from each borehole. The phylotypes related to Thiomicrospira and Alcanivorax were detected in all of the boreholes and vent samples. Our findings provide insights into bacterial communities in the shallow sub-seafloor environments at active deep-sea hydrothermal vent fields.     

Selection and trajectory design to mission secondary targets

Recently, with new trajectory design techniques and use of low-thrust propulsion systems, missions have become more efficient and cheaper with respect to propellant. As a way to increase the mission’s value and scientific return, secondary targets close to the main trajectory are often added with a small change in the transfer trajectory. As a result of their large number, importance and facility to perform a flyby, asteroids are commonly used as such targets. This work uses the Primer Vector theory to define the direction and magnitude of the thrust for a minimum fuel consumption problem. The design of a low-thrust trajectory with a midcourse asteroid flyby is not only challenging for the low-thrust problem solution, but also with respect to the selection of a target and its flyby point. Currently more than 700,000 minor bodies have been identified, which generates a very large number of possible flyby points. This work uses a combination of reachability, reference orbit, and linear theory to select appropriate candidates, drastically reducing the simulation time, to be later included in the main trajectory and optimized. Two test cases are presented using the aforementioned selection process and optimization to add and design a secondary flyby to a mission with the primary objective of 3200 Phaethon flyby and 25143 Itokawa rendezvous.