Monitoring degradation in arid and semi-arid forests and woodlands: The case of the argan woodlands (Morocco)

Arid and semi-arid forests and woodlands (hereafter called «dryland forests»), in spite of their ecological and social importance, have received little attention in land change studies. Growing evidence shows that these forests have been receding at very high rates in many places, suggesting a need for a better understanding of the processes and causes of dryland forest degradation. Changes in the extent of dryland forests are debated in part because estimates of forest and woodland areas in drylands are uncertain. Causal explanations of the degradation tend to draw on the literature on desertification and tropical deforestation, and to emphasize either local or remote, and either social or biophysical drivers. This study contributes to a better understanding of dryland forest degradation as a basis for conservation policies. Firstly, we argue that monitoring arid and semi-arid forests and woodlands using area estimates may lead to an underestimation of the severity of change because tree density change often exceeds area change. Secondly, we argue that the analysis of degradation processes in these multifunctional landscapes should integrate both local and remote, and both social and biophysical factors. We use a case study of degradation in the argania woodlands in semi-arid to arid Southwest Morocco to test these two claims. We used gridded tree counts on aerial photographs and satellite images to estimate forest change between 1970 and 2007, and we tested several possible causes of change on the basis of original socio-economic field surveys and climatic and topographic data. We found that forest density declined by 44.5% during this period, a figure that is significantly underestimated if forest area change is used as a measure of degradation. Increasing aridity and, to a lesser extent, fuelwood extraction were related to forest decline. No effect of grazing by local livestock was found.     

The role of the Kupferschiefer in the formation of hydrothermal base metal mineralization in the Spessart ore district, Germany: insight from detailed sulfur isotope studies

The Spessart district (SW Germany), located at the southwestern margin of the Permian Kupferschiefer basin in Central Europe, hosts abundant stratabound and structurally controlled base metal mineralization. The mineralization styles identified are (1) stratabound Cu-Pb-Zn-(Ag) ores in Zechstein sedimentary rocks, (2) structurally controlled Cu-As-(Ag) ores in Zechstein sedimentary rocks, (3) crosscutting Co-Ni-(Bi)-As and Cu-Fe-As veins, (4) stratabound metasomatic Fe-Mn carbonate ores in Zechstein dolomite, (5) barren barite veins, and (6) Fe-Mn-As veins in Permian rhyolites. Building on previous work that involved mineralogical, textural, and chemical characterization of the major mineralization types, we have performed a comprehensive sulfur isotope study that applied both conventional and novel laser-ablation multi-collector inductively coupled plasma mass spectrometry techniques. The δ³⁴S values of sulfide minerals from the different ore types are consistently negative and highly variable, in the range between −44.5‰ and −3.9‰, whereas the δ³⁴S values of barite are all positive in the range between 4.7‰ and 18.9‰. Remarkably, stratabound and structurally controlled mineralization in Zechstein sedimentary rocks has the least negative δ³⁴S values, whereas vein-type deposits have consistently more negative δ³⁴S values. The observed pattern of sulfide δ³⁴S values can be best interpreted in terms of fluid mixing at the basement-cover interface. Hydrothermal fluids originating from the crystalline basement migrated upward along subvertical fault zones and were periodically injected into groundwaters that were flowing in the post-Variscan sedimentary cover. These groundwaters had interacted with the Zechstein sedimentary rocks, resulting in fluids characterized by elevated concentrations of reduced sulfur (with negative δ³⁴S values) and alkaline pH. Repeated mixing between both chemically contrasting fluids caused rapid and efficient precipitation of sulfide ore minerals in hydrothermal veins with highly variable but distinctly negative δ³⁴S values.     

汶川M_w 7.9级地震同震断层陡坎类型与级联破裂模型

2008年5月12日,汶川Mw7.9级地震在青藏高原东缘沿龙门山逆冲断裂带中段形成了两条NE向和一条NW向逆冲走滑型地表破裂。依据同震地表陡坎形态特征,将其分为8种类型:逆断层陡坎、上盘垮塌陡坎、挤压推覆陡坎、右旋挤压推覆陡坎、断层相关褶皱陡坎、后冲挤压陡坎、上冲叠覆陡坎和局部正断层陡坎。汶川地震所形成的同震地表破裂主要由以逆冲为主的映秀破裂段和兼具逆冲、右旋走滑的北川破裂段两部分组成,这两个破裂段分别对应于Mw7.8与Mw7.6级地震事件;它们还可进一步细分为分别对应于Mw7.5、Mw7.7、Mw7.0和Mw7.5等4个次级事件的4个次级破裂段。这些次级破裂段的级联破裂可以用来解释为什么汶川地震的持续时间长达110 s。余震震源机制分析结果表明,发震断层的倾角随深度的增加而变缓,且从西南向北东逐渐变陡可以用来解释走滑分量增加的成因。此次大地震还表明,沿青藏高原东缘地形抬高的主要驱动力可能是地壳挤压缩短,而不一定是下地壳物质流动和膨胀引起上地壳的隆升。     

Hydrosedimentary records and Holocene environmental dynamics in the Yamé Valley (Mali,Sudano-Sahelian West Africa)

Research conducted in the Yamé Valley (Dogon Country, Mali) provides valuable information about the river systems and their Holocene evolution in Sudano-Sahelian West Africa. Past research in the region has relied primarily on marine and lacustrine records. The new results confirm correlation between palaeoclimatic fluctuations recorded in both the river system and in tropical African lakes. They offer a new continental milestone for understanding of the environmental repercussions of Holocene monsoon oscillations. These studies demonstrate the value of river systems as a palaeoenvironmental record and the role of palaeoclimatic and anthropogenic factors in the Holocene dynamics of Sudano-Sahelian hydrosystems.     

Un réseau fluviatile d'âge Burdigalien terminal dans le Sud-Est de la France : remplissage,extension, âge,implications

An integrated study combining facies analysis, multiple group biostratigraphy, identification of depositional sequences and mapping has been conducted on the Miocene Molasse Basin of the external Alps (southeastern France). The filling of the basin is described as resulting from a succession of fluvial incisions subsequently filled during marine transgressions. The major incision is dated as Latest Burdigalian and the major transgression as Langhian. This revised interpretation of the Miocene physiographic evolution of the Molasse Basin implies a re-examination of previous stratigraphic correlations within the basin. To cite this article: D. Besson et al., C. R. Geoscience 337 (2005).     

Copper isotopes as monitors of redox processes in hydrothermal mineralization

The stable copper isotope composition of 79 samples of primary and secondary copper minerals from hydrothermal veins in the Schwarzwald mining district, South Germany, shows a wide variation in δ⁶⁵Cu ranging from −2.92 to 2.41‰. We investigated primary chalcopyrite, various kinds of fahlores and emplectite, as well as supergene native copper, malachite, azurite, cuprite, tenorite, olivenite, pseudomalachite and chrysocolla. Fresh primary Cu(I) ores have at most localities copper isotope ratios (δ⁶⁵Cu values) of 0 ± 0.5‰ despite the fact that the samples come from mineralogically different types of deposits covering an area of about 100 by 50 km and that they formed during three different mineralization events spanning the last 300 Ma. Relics of the primary ores in oxidized samples (i.e., chalcopyrite relics in an iron oxide matrix with an outer malachite coating) display low isotope ratios down to −2.92‰. Secondary Cu(I) minerals such as cuprite have high δ⁶⁵Cu values between 0.4 and 1.65‰, whereas secondary Cu(II) minerals such as malachite show a range of values between −1.55 and 2.41‰, but typically have values above +0.5‰. Within single samples, supergene oxidation of fresh chalcopyrite with a δ value of 0‰ causes significant fractionation on the scale of a centimetre between malachite (up to 1.49‰) and relict chalcopyrite (down to −2.92‰). The results show that—with only two notable exceptions—high-temperature hydrothermal processes did not lead to significant and correlatable variations in copper isotope ratios within a large mining district mineralized over a long period of time. Conversely, low-temperature redox processes seriously affect the copper isotope compositions of hydrothermal copper ores. While details of the redox processes are not yet understood, we interpret the range in compositions found in both primary Cu(I) and secondary Cu(II) minerals as a result of two competing controls on the isotope fractionation process: within-fluid control, i.e., the fractionation during the redox process among dissolved species, and fluid-solid control, i.e., fractionation during precipitation involving reactions between dissolved Cu species and minerals. Additionally, Rayleigh fractionation in a closed system may be responsible for some of the spread in isotope compositions. Our study indicates that copper isotope variations may be used to decipher details of natural redox processes and therefore may have some bearing on exploration, evaluation and exploitation of copper deposits. On the other hand, copper isotope analyses of single archeological artefacts or geological or biological objects cannot be easily used as reliable fingerprint for the source of copper, because the variation caused by redox processes within a single deposit is usually much larger than the inter-deposit variation.     

Transcrystalline melt migration in clinopyroxene

Glass inclusions in clinopyroxene phenocrysts from La Sommata (Vulcano Island, Aeolian Arc) were reheated and submitted to a sustained thermal gradient. Each remelted inclusion undergoes a transient textural and chemical reequilibration and concomitantly begins to migrate along a crystallographic direction, at a small angle with the thermal gradient. The completion of morphological evolution requires a characteristic time that is governed by chemical diffusion. Chemical reequilibration results in the formation of a colored halo that delineates the former location and shape of the inclusion after it has migrated away. Transcrystalline migration proceeds by dissolution of the host clinopyroxene ahead and precipitation astern. Its rate is not limited by Fick’s law, but by the crystal-melt interface kinetics. Clinopyroxene dissolution and growth are slower than for olivine in similar conditions but obey the same analytical law, which can be transposed to equally or more sluggish melting or crystallization events in nature. When a gas bubble is initially present, it responds to elastic forces by quickly shifting toward the cold end of the inclusion, where it soon becomes engulfed as an isolated fluid inclusion in the reprecipitated crystal. This study confirms that transcrystalline melt migration, beside its possible implications for small-scale melt segregation and fluid-inclusion generation in the Earth’s mantle, provides an experimental access to interfacial kinetic laws in near-equilibrium conditions.     

Near‐surface temperatures and heat balance of bare outcrops exposed to solar radiation

Subsurface temperatures in rocks naturally fluctuate under the influence of local meteorological conditions. These fluctuations play a role in mechanical weathering, thus creating the environmental conditions conducive to natural hazards such as rockfalls and providing important sediment source terms for landscape evolution. However, the physics that control heat penetration into rocks are not fully understood, which makes the underground thermal state difficult to interpret when temperature measurements are available and even more difficult to estimate for unmonitored sites. This is an important lacuna given possible impacts of future climate change on mechanical weathering processes. The natural daily variations of subsurface temperatures were investigated on a bare gneiss outcrop exposed to solar radiation, where temperatures at various depths (up to 50 cm), as well as the solar radiation reaching a pyranometer, were monitored hourly for several months. This detailed times series of thermal data was used to gain insight into the heat balance at the inclined free surface of the rock mass. Attention was focused on two major contributors to the heat balance; the heat flux entering the rock mass through conduction and the incoming shortwave (solar) radiation. A Fourier decomposition of the temperature measurements provided an estimate of the in situ thermal conductivity of the rock and was used to calculate the conductive term. The shortwave radiation term was determined on the basis of the pyranometer measurements adjusted to account for the angle of incidence of the sun. It is shown that, throughout clear‐sky periods, heat exchanges at the surface are mainly controlled by direct solar radiation during the day, and by a roughly constant outgoing heat flux during the night. Subsurface temperatures can be reliably estimated with a semi‐infinite medium model whose boundary condition is derived from an analytical insolation model that takes atmospheric attenuation into account. Copyright © 2011 John Wiley & Sons, Ltd.