Metallographic cooling rates and origin of IVA iron meteorites

We have determined the metallographic cooling rates for 13 IVA irons using the most recent and most accurate metallographic cooling rate model. Group IVA irons have cooling rates that vary from 6600 °C/Myr at the low-Ni end of the group to 100 °C/Myr at the high-Ni end of the group. This large cooling rate range is totally incompatible with cooling in a mantled core which should have a uniform cooling rate. Thermal and fractional crystallization models have been used to describe the cooling and solidification of the IVA asteroid. The thermal model indicates that a metallic body of 150 ± 50 km in radius with less than 1 km of silicate on the outside of the body has a range of cooling rates that match the metallographic cooling rates in IVA irons in the temperature range 700-400 °C where the Widmanstätten pattern formed. The fractional crystallization model for Ni with initial S contents between 3 and 9 wt% is consistent with the measured variation of cooling rate with bulk Ni and the thermal model. New models for impacts in the early solar system and the evolution of the primordial asteroid belt allow us to propose that the IVA irons crystallized and cooled in a metallic body that was derived from a differentiated protoplanet during a grazing impact. Other large magmatic iron groups, IIAB, IIIAB, and IVB, also show significant cooling rate ranges and are very likely to share a similar history.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Background concentrations of elements in surface soils and their changes as affected by agriculture use in the desert-oasis ecotone in the middle of Heihe River Basin,North-west China

The concentrations of twenty four chemical elements in the surface layer of natural desert soils and the cultivated farmland soils were measured at a desert-oasis ecotone in the middle of Heihe river basin, north-west China. Background values were estimated for (a) major elements (Si 335.3 g kg^− 1, Al 49.4 g kg^− 1, Fe 19.1 g kg^− 1, Ca 29.4 g kg^− 1, Mg 8.9 g kg^− 1, K 20.1 g kg^− 1, Na 17.5 g kg^− 1 and P 0.338 g kg^− 1), (b) heavy metals and non-metals (Cr 55.8 mg kg^− 1, Mn 404.8 mg kg^− 1, Ni 17.7 mg kg^− 1, Cu 5.1 mg kg^− 1, Zn 33.7 mg kg^− 1, Pb 15.5 mg kg^− 1 and As 5.2 mg kg^− 1) and (c) other trace elements (Ti 2.0 mg kg^− 1, V 55.3 mg kg^− 1, Co 5.7 mg kg^− 1, Rb 82.4 mg kg^− 1, Sr 232.9 mg kg^− 1, Y 14.7 mg kg^− 1, Zr 194.9 mg kg^− 1, Nb 7.8 mg kg^− 1 and Ba 720.6 mg kg^− 1). After natural desert soil was cultivated for agricultural use, significant changes in element concentrations occurred under tillage, irrigation and fertilisation management. Compared to natural soil, the for the levels of Si, K, Na, Sr, Zr and Ba decreased, and no changes were observed for Rb, while the values of the other 17 elements increase in agricultural soil from 1.2 to 3.5 times. However, their absolute concentrations are still low, suggesting that the arable soil in this region remains comparatively a clean soil. The increased silt, clay and organic carbon content, under long-term irrigation, enriched the fine-grained materials, and application of fertilisers and manure contributed to the accumulation of most elements in arable soil. The accumulation of elements in agricultural soil increased with increasing cultivation years and extent of soil development.     

碳酸盐岩裂缝与岩溶作用研究

从构造与非构造作用角度出发,突出研究断层对裂缝的控制作用、断裂与岩溶的关系和裂缝与岩溶之间的关系,揭示碳酸盐岩裂缝与岩溶的发育规律。研究表明：构造裂缝为岩溶发育提供岩溶作用进行的有利通道,非构造裂缝则可以加速溶蚀作用的进行,促进岩溶的发育;裂缝与岩溶之间的关系始终是相辅相成、相互促进的关系。     

Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).     

长春季节性冻土地区土体微观结构与水分迁移的关系

利用扫描电子显微镜(SEM)技术,从土体微观结构特征出发,对长春—吉林公路某路段季节冻土的粒度成分、结构单元体成分、孔隙特征及结构特征进行了定量分析,并对其与水分迁移的关系进行了讨论。从SEM图像定量分析中可以看出,研究路段的土体,其微观颗粒——结构单元体、孔隙的定向性均较差,粒内微小孔隙发育,土体尽管在粘粒含量较高的情况下,也表现出孔隙主要在1~2μm内分布,即毛细孔隙极发育,说明样品具有各向同性的特点,即在外界条件相同的情况下水分迁移的通道在水平和垂直方向上具有相同的性质。     

天津地面沉降区土水比论述

天津市地面沉降分布广,沉降速率大。本文针对当前地面沉降研究和防治过程中所遇到的勘查资料严重缺乏、禁采难以全面实现等难题,提出了土水比指标量。通过概念分析和对多年数据的分析,认为土水比可以检验地下水开采量数据的统计精度,指示地下水资源补给及土层释水条件,并表明沉降的严重程度,反映地下水资源的保障程度。建议在沉降防治工作中,以土水比作为指标,通过相关分析模型来制定压采量。     

基于分布式水文模拟的三峡区间洪水预报(Ⅰ)——模型构建及验证

长江三峡区间因暴雨形成的洪水峰高量大,对三峡水库的防洪安全和运行调度的影响很大.本论文依据三峡地区的地形地貌特征,采用基于GIS的机理性分布式水文模型,来模拟三峡区间入库洪水,以尽量减少洪水预报中的不确定性.利用近期建成的78个自动雨量站网监测的小时降雨信息作为模型的输入,对模型参数进行了率定和验证,结果表明:大多数洪水过程的模拟精度较好,但也有的模拟结果较差,其中降雨信息缺失是洪水预报不确定性的主要来源.