Historical trends of organic pollutants in sediment cores from Hong Kong

Recent studies have indicated the occurrence of a wide range of trace organic contaminants, including polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in the Hong Kong environment. These contaminants are potentially harmful to ecological systems, particularly in coastal areas. In this study, two sediment cores (4m) were collected from southern waters of Hong Kong in 2004 to study the historical trends, distribution patterns, and potential sources of trace organic contaminants. DDTs (p,p'-DDT, o,p'-DDT, p,p'-DDD, o,p'-DDD and p,p'-DDE), hexachlorohexanes (HCHs) (alpha and gamma), hexachlorobenzene (HCB), and PCBs were detected in the samples, whereas other target compounds were all below detection limits. Many OCPs have not been produced or used for many years due to toxicological or environmental concerns and PCB use is prohibited in Hong Kong. However, some compounds were still detectable in recent years, and were found to be widely distributed in the environment, likely because of pollutant inputs from the highly industrialized Pearl River Delta region. These results provide important information on current and historical contamination in Hong Kong, and help to reconstruct the pollution history of these trace organic pollutants in Hong Kong coastal waters.     

Three-Dimensional Simulation of Water Circulation in the Java Sea: Influence of Wind Waves on Surface and Bottom Stresses

A one-year simulation of tide- andwind-driven circulation in the Java Sea, which is one ofthe Indonesian seas located in a tropical area, hasbeen carried out using a three-dimensionalhydrodynamic model incorporating the influence of thewind waves generated at the sea surface. This area isinfluenced by the monsoon climate (east- andwest-monsoon). Six hourly-wind fields at 10 m abovethe sea surface were used as a representative windfield. In other respects, the effect of waves on thethree-dimensional hydrodynamic model has beenrepresented by the surface and bottom stresses. Athird-generation wave model called WAM (WAMDI, 1988)was used to calculate the wave parameters and thewave dependence of the drag coefficient. Thetrajectory of water particles induced by thecalculated velocity fields in the Java Sea was then simulated.In dealing with hazardous phenomena, this modelwill be extended to predict suspended sediment fluxes,particularly those relating to catastrophic changes in seabottom topography and beach erosion. It is also animportant tool for the prediction of storm surge events.     

Stream response to subsidence from underground coal mining in central Utah

 Short-term geomorphic and hydrologic effects of subsidence induced by longwall mining under Burnout Creek, Utah were evaluated. During the year after longwall mining, 0.3–1.5 m of subsidence was measured near impacted reaches of the mountain stream channel. The major channel changes that occurred in a 700-m reach of Burnout Creek that was subsided from 1992 to 1993 were: (1) increase in lengths of cascades and to a lesser extent glides; (2) increases in pool length, numbers and volumes; (3) increase in median particle diameter of bed sediment in pools; and (4) some constriction in channel geometry. Most of the changes appeared short-lived, with channel recovery approaching pre-mining conditions by 1994. In a 300-m reach of the South Fork that was subsided from 1993 to 1994, only channel constriction was observed, although any impacts on pool morphology may have been confounded by heavy grazing in the riparian reaches during the dry summer of 1994. Similar near-channel sedimentation and loss of pool volume between 1993 and 1994 were noted throughout Burnout Creek and in adjacent, unmined James Creek. Subsidence during the 3-year period had no effect on baseflows or near-channel landslides. Received: 10 April 1998 · Accepted: 21 September 1998     

Stick–slip behavior of Indian gabbro as studied using a NIED large-scale biaxial friction apparatus

This paper reports stick–slip behaviors of Indian gabbro as studied using a new large-scale biaxial friction apparatus, built in the National Research Institute for Earth Science and Disaster Prevention(NIED), Tsukuba, Japan. The apparatus consists of the existing shaking table as the shear-loading device up to 3,600 k N, the main frame for holding two large rectangular prismatic specimens with a sliding area of 0.75 m2 and for applying normal stresses rnup to 1.33 MPa, and a reaction force unit holding the stationary specimen to the ground. The shaking table can produce loading rates v up to 1.0 m/s,accelerations up to 9.4 m/s2, and displacements d up to0.44 m, using four servocontrolled actuators. We report results from eight preliminary experiments conducted with room humidity on the same gabbro specimens at v = 0.1–100 mm/s and rn= 0.66–1.33 MPa, and with d of about 0.39 m. The peak and steady-state friction coefficients were about 0.8 and 0.6, respectively, consistent with the Byerlee friction. The axial force drop or shearstress drop during an abrupt slip is linearly proportional to the amount of displacement, and the slope of this relationship determines the stiffness of the apparatus as1.15 9 108N/m or 153 MPa/m for the specimens we used.This low stiffness makes fault motion very unstable and the overshooting of shear stress to a negative value was recognized in some violent stick–slip events. An abrupt slip occurred in a constant rise time of 16–18 ms despite wide variation of the stress drop, and an average velocity during an abrupt slip is linearly proportional to the stress drop.The use of a large-scale shaking table has a great potential in increasing the slip rate and total displacement in biaxial friction experiments with large specimens.     

Estrogen equivalent concentration of individual isomer-specific 4-nonylphenol in Ariake sea water, Japan

Concentrations of 4-nonylphenol (NP) were determined by isomer-specific quantification of individual NP isomers based on relative response factor (RRF) quantification with GC–MS in combination with steam distillation extraction. Concentrations of NP in the Ariake Sea decreased with distance from the river mouth (St.A; 49 ng NP/l) to offshore areas (St.C; 11 ng NP/l). Even the least concentration in water from St.C in Ariake Sea was sufficient to have adverse effects on barnacles. The isomers, NP1–NP14 were separated by GC–PFC and identified structurally with NMR. The isomers varied in estrogenic activity with NP7 exhibiting the greatest estrogenic activity with a potency that was approximately 1.9 × 10⁻³ that of 17β-estradiol (E2) in recombinant yeast screen system. The coefficient of variation (CV) of NP isomer’s concentrations among three samples at St.A, B and C were 4–75%. This suggests that NP isomers might be independently degraded in aquatic environmental samples. The predicted estrogenic activity of measured concentrations of NP in Ariake Sea was 2.7–3.0-fold greater than the measured estrogen agonist activity.     

Diffuse component of the cosmic far UV radiation and interstellar dust grains

The diffuse far UV radiation ( 1350–1480 Å) observed in the sky region ofl ^II180°, 0°b ^II40° is analyzed in connection with the distributions of stars and dust grains as well as with optical properties of grains. Its intensity (starlight+scattered light) is about 6×10^–7 erg cm^–2 sec^–1 sr^–1 Å^–1 in the direction ofb ^II0° andl ^II180°. The latitude dependence of the intensity is in approximate agreement with the plane parallel slab model of the galaxy with a reasonable set of parameters. The interstellar scattering gives an albedo close to unity and forward phase function of about 0.6, which are not inconsistent with the model of interstellar grains of Wickramasinghe. The upper limit of the extragalactic UV is 2×10^–8 erg cm^–2 sec^–1 sr^–1 Å^–1 in the same region of wave-length.     

Mechanical structure of JNLT

The Japanese National Large Telescope (JNLT) requires mechanical performance of high tracking accuracy to achieve good image quality and a mechanical configuration to provide several kinds of focus modes. Under these requirements, a conceptual design for the JNLT mechanical structure has been performed. This paper presents the results of the conceptual design currently under consideration.Paper presented at the symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.