赵各庄矿地下水位时间序列数字滤波分析

为了更好地了解煤矿地下水位的变化趋势,结合工程实例,运用递归和非递归2种滤波技术进行分析,通过对比2种滤波技术的滤波效果,可以得到地下水位的变化规律和成因机理。结果表明:滤波系数的调校对滤波效果的影响至关重要。根据平滑度指标、均方根误差和信噪比对现有观测数据进行计算的结果可知,当b=0.5时递归滤波效果相对较好,当q=5时非递归滤波效果相对较好。滤波结果可以作为预测未来该地区地下水位变化趋势的依据,也可以为安全生产提供参考。     

新疆额尔宾山花岗岩侵位年龄和成因及其对南天山洋闭合时代的限定

额尔宾山花岗岩岩体位于南天山晚古生代侵入岩带,对该花岗岩进行锆石U-Pb定年获得296.1±1.8Ma的年龄,为早二叠世。岩石主量元素分析结果表明,该花岗岩的Si O2含量为66.96%~67.3%,富碱(Na2O+K2O=7.53%~7.97%),K2O/Na2O1(1.15~1.27),属高钾钙碱性系列岩石;Al2O3为15.56%~15.62%,Al2O3K2O+Na2O+Ca O,属于过铝型。岩石稀土元素配分模式呈现轻稀土元素(LREE)富集((La/Yb)N=27.03~30.62)、重稀土元素(HREE)亏损((LREE/HREE)=18.2~20.1)、具有中等程度的负Eu异常(δEu=0.64~0.68)。微量元素判别结果显示,其具有I-A型花岗岩过渡的特征。结合区域地质背景综合分析,初步认定该岩体可能形成于南天山同碰撞向后碰撞构造体制转换时期,据此可以推测南天山洋盆闭合时限至少应该在早二叠世以前。     

西太平洋暖池热盐结构盐度场变异的主模态

基于1950~2011年间的月平均温、盐度资料,以28℃等温线作为西太平洋暖池的定义标准,并取ΔT=-0.4℃,分别计算了暖池区(20°N~15°S,120°E~140°W)各格点混合层、障碍层和深层的平均盐度,构成了暖池热盐结构的盐度场.据此,运用EOF分解法分析了暖池热盐结构盐度距平场主要模态的变化特征及其与ENSO间的关系,并探讨了主要模态的年际变异机理.结果表明,暖池热盐结构盐度场第一模态揭示了盐度场变异的关键区位于暖池中部;该模态具有2~4a的年际变化和准10a的年代际变化,并在1977年前后经历了一次气候跃变(此外,深层盐度场第一模态还在1999年前后发生了一次气候跃变),且在跃变前后与不同类型的ENSO事件有较密切的联系.暖池中部混合层和障碍层盐度的变化比较一致,即在跃变前盐度为偏高期,而在跃变后则变为偏低期.暖池中部深层盐度在1977年以前和1999年之后皆处于偏高期,而在1978~1999年间则处于偏低期.而且,从混合层至深层,盐度的变化幅度逐渐变小.进一步分析表明,暖池中部混合层和障碍层盐度的年际变化主要是由纬向风、南赤道流(SEC)和降水共同引起的,即当东风增强(减弱)时,强(弱)SEC将携带更多(少)的高盐水进入混合层或潜沉至障碍层,同时局地降水的减少(增多),也使得混合层和障碍层的盐度增加(减少);深层盐度的年际变化主要是由SEC和赤道潜流(EUC)导致的,即当SEC增强(减弱)时,将有更多(少)的高盐水进入暖池,而当EUC增强(减弱)时则有更多(少)的低盐水流出暖池,从而使得暖池的深层盐度升高(降低).     

Petrology and PGE Abundances of High‐Cr and High‐Al Podiform Chromitites and Peridotites from the Bulqiza Ultramafic Massif,Eastern Mirdita Ophiolite,Albania

The Bulqiza ultramafic massif, which is part of the eastern Mirdita ophiolite of northern Albania, is world renowned for its high-Cr chromitite deposits. High-Cr chromitites hosted in the mantle section are the crystallized products of boninitic melts in a supra-subduction zone (SSZ). However, economically important high-Al chromitites are also present in massive dunite of the mantle-crust transition zone (MTZ). Chromian-spinel in the high-Al chromitites and dunites of the MTZ have much lower Cr# values (100Cr/(Cr+Al)) (47.7–55.1 and 46.5–51.7, respectively) than those in the high-Cr chromitites (78.2–80.4), harzburgites (72.6–77.9) and mantle dunites (79.4–84.3). The chemical differences in these two types of chromitites are reflected in the behaviors of their platinum-group elements (PGE). The high-Cr chromitites are rich in IPGE relative to PPGE with 0.10–0.45 PPGE/IPGE ratios, whereas the high-Al chromitites have relatively higher PPGE/IPGE ratios between 1.20 and 7.80. The calculated melts in equilibrium with the high-Cr chromitites are boninitic-like, and those associated with the high-Al chromitites are MORB-like but with hydrous, oxidized and TiO2-poor features. We propose that the coexistence of both types of chromitites in the Bulqiza ultramafic massif may indicates a change in magma composition from MORB-like to boninitic-like in a proto-forearc setting during subduction initiation.     

钻井利器的故事之“铝合金钻杆”

地球科学的发展对地球深部数据的依赖程度越来越高,作为“入地”重要手段的科学超深井工程是研究深部地质学的重要方法,被誉为是“伸入地壳的望远镜”。与钢钻杆相比,铝合金钻杆以其独特的优越性(质量轻、比强度高、钻进深度深、所需能耗少),已成为难进入地区、大位移井、超深井等钻柱设计的优选方案。本文从科普的角度介绍了钻柱与钻杆的区别、钻柱的使用极限长度、铝合金钻杆的技术优势及其现存的不足之处,以此提高对铝合金钻杆的认识,促进铝合金钻杆的研究和发展。     

环境因素对毛乌素沙地旱柳树干液流的影响分析

在干旱-半干旱地区,研究植物的耗水特征及与气象因子、地下水水位的关系对水资源合理开发利用和生态环境保护具有重要的意义。采用原位监测方法,对气象、树干液流、土壤含水率和地下水水位进行了观测,研究了毛乌素沙地广泛分布及与地下水关系密切的旱柳与气象因子、土壤含水率以及地下水水位的关系。研究表明:水汽压亏缺和潜在蒸散发是控制旱柳耗水最重要的气象因素;研究期内,土壤含水率对旱柳耗水的影响较小;旱柳的耗水与地下水具有密切的关系,随着水位埋深的增大,旱柳的耗水先增大后减小,在水位埋深1.25 m处达到最大。利用地下水的昼夜波动计算了地下水的蒸散发消耗量,发现旱柳的用水与地下水的蒸散发消耗量具有一定的相关性,表明地下水是旱柳重要的用水水源。     

大兴安岭伊勒呼里山早白垩世碱长花岗岩年龄、地球化学特征及其地质意义

对大兴安岭伊勒呼里山早白垩世碱长花岗岩进行了岩相学、地球化学、LA-ICP-MS锆石U-Pb定年研究。伊勒呼里山地区碱长花岗岩主量元素具有富Si、富碱,贫Mg、Ca的特征;微量元素亏损Sr、P、Eu、Ti,富集K、Rb、Th等不相容元素,元素地球化学特征表明,岩体为铝质A型花岗岩(A/CNK=0.88~1.21,A/NK=0.94~1.49)。测年结果显示,粗中粒碱长花岗岩的锆石年龄为140.3±1.0Ma,细中粒碱长花岗岩锆石年龄为137.9±0.8Ma,均形成于早白垩世。结合区域研究资料,伊勒呼里山地区碱长花岗岩岩体的形成与蒙古-鄂霍茨克洋闭合后的岩石圈伸展密切相关,其岩浆源区可能为地壳物质的部分熔融。     

Comparative study for environmental performances of traditional manufacturing and directed energy deposition processes

Additive manufacturing is considered more sustainable than traditional manufacturing due to its efficient energy and materials usage. However, previous literature indicates that this suggestion is applicable only for the polymer materials, and the environmental issues of additive manufacturing with metallic materials are still not clear. With the method of life cycle assessment, this paper analyzes and compares the energy consumptions and environmental impacts of direct energy deposition and traditional machining processes for a typical metal part. Further, the article attempts to identify the significant issues in the two manufacturing options that contribute most to the environmental impacts. Six environmental impacts were assessed in this study: global warming potential (GWP); acidification potential (AP); eutrophication potential; ozone depletion potential (ODP); photochemical ozone creation potential (POCP); and abiotic depletion potential (ADP). The results show that the gear laser fabrication process consumes more energy and releases more negative emissions compared with traditional gear manufacturing processes. The results of GWP, AP, ODP, ADP and POCP of the traditional gear manufacturing are only 30.33, 43.42, 17, 65.05 and 54.68% of the gear laser fabrication.