Typical basin-fill sequences and basin migration in Yanshan, North China--Response to Mesozoic tectonic transition

Basin-fill sequences of Mesozoic typical basins in the Yanshan area, North China may be divided into four phases, reflecting lithosphere tectonic evolution from flexure (T3), flexure with weak rifting (J1+2), tectonic transition (J3), and rifting (K). Except the first phase, the other three phases all start with lava and volcaniclastic rocks, and end with thick coarse clastic rocks and/or conglomerates, showing cyclic basin development rather than simple cyclic rift mechanism and disciplinary basin-stress change from extension to compression in each phase. Prototype basin analysis, based on basin-fill sequences, paleocurrent distribution and depositional systems, shows that single basin-strike and structural-line direction controlling basin development had evidently changed from east-west to northeast in Late Jurassic in the Yanshan area, although basin group still occurred in east-west zonal distribution. Till Early Cretaceous, main structural-line strike controlling basins just turned to northeast by north in the studied area.     

Mesozoic basin evolution and tectonic mechanism in Yanshan, China

The Mesozoic basins in Yanshan, China underwent several important tectonic transformations, including changes from a pre-Late Triassic marginal cratonic basin to a Late Triassic-Late Jurassic flexural basin and then to a late Late Jurassic-Early Cretaceous rift basin. In response to two violent intraplate deformation at Late Triassic and Late Jurassic, coarse fluvial depositional systems in Xingshikou and Tuchengzi Formations were deposited in front of thrust belts. Controlled by transform and extension faulting, fan deltas and lacustrine systems were deposited in Early Cretaceous basins. The composition of clastic debris in Late Triassic and Late Jurassic flexural basins respectively represents unroofing processes from Proterozoic to Archean and from early deposited, overlying pyroclastic rocks to basement rocks in provenance areas. Restored protobasins were gradually migrated toward nearly NEE to EW-trending from Early Jurassic to early Late Jurassic. The Early Cretaceous basins with a NNE-trending crossed over early-formed basins. The Early-Late Jurassic and Early Cretaceous basins were respectively controlled by different tectonic mechanisms.     

Depositional sequence architecture and filling response model of the Cretaceous in the Kuqa depression, the Tarim basin

The Cretaceous system of the Kuqa depression is a regional scale (second order) depositional sequence defined by parallel unconformities or minor angular unconformities. It can be divided into four third-order sequence sets, eleven third-order sequences and tens of fourth- and fifth-order sequences. It consists generally of a regional depositional cycle from transgression to regression and is composed of three sets of facies associations: alluvial-fluvial, braided river-deltaic and lacustrine-deltaic facies associations. They represent the lowstand, transgressive and highstand facies tracts within the second-order sequence. The tectonic subsidence curve reconstructed by backstripping technique revealed that the Cretaceous Kuqa depression underwent a subsidence history from early accelerated subsidence, middle rapid subsidence and final slower subsidence phases during the Cretaceous time, with the correspondent tectonic subsidence rates being 30-35 m/Ma, 40-45 m/Ma and 5-10 m/Ma obtained from northern foredeep. This is likely attributed to the foreland dynamic process from early thrust flexural subsidence to late stress relaxation and erosion rebound uplift. The entire sedimentary history and the development of the three facies tracts are a response to the basin subsidence process. The slower subsidence foreland gentle slope was a favorable setting for the formation of braided fluvial deltaic systems during the late period of the Cretaceous, which comprise the important sandstone reservoirs in the depression. Sediment records of impermanent marine transgression were discovered in the Cretaceous and the major marine horizons are correctable to the highstands of the global sea level during the period.     

Distribution characteristics and petroleum geological significance of the Silurian asphaltic sandstones in Tarim Basin

The Tarim Basin is a typical superimposed basin in which there have occurred multiphase adjustment and destruction of the reservoirs. The widely distributed asphaltic sandstones of the Silurian are the very product after destruction of the reservoirs. Studies show that the Silurian asphaltic sandstones distributed in both the middle and western parts on the basin are controlled chiefly by the Caledonian oil source area and by the Tazhong, Tabei and Bachu uplifts, whereas the distribution of the asphaltic sandstones on local structural belts is controlled by the reservoir's sedimentary system. Vertically, most of the asphaltic sandstones are under the regional caprock of red mudstones and the upper sandstone section of compact lithology. Due to the difference of hydrocarbon destruction in the early stage and the influence of hydrocarbon recharge in the late stage, the asphaltic sandstones and oil-bearing sandstones in the Tazhong area can be vertically divided into the upper and lower sections and they have an interactive distribution relationship as well. Asphaltic sandstones exist not only in intergranular pores but also inside the grains of sand and between the crevices, proving the destruction of early reservoirs due to uplifting. The existence of asphaltic sandstones over a large area reveals that the large-scale migration and accumulation and the subsequent destruction of hydrocarbons in the Craton area. The destruction caused a loss of the reserve resources of the Palaeozoic amounting to nearly 13.3 billion tons. Asphaltic sandstones formed after the destruction of oil and gas may serve as an effective caprock which is beneficial to accumulation of hydrocarbons and formation of the pool sealed by asphaltic sandstones in the later stage. The destruction of the early Silurian hydrocarbons depends on the stratigraphic burial depth. The deep part under the northern slope of Tazhong is an area favorable to search of undestroyed Silurian oil reservoirs.     

Global scale annual and semi-annual variations of daytime NmF2 in the high solar activity years

The annual and semi-annual variations of the ionosphere are investigated in the present paper by using the daytime F2 layer peak electron concentration (NmF2) observed at a global ionosonde network with 104 stations. The main features are outlined as follows. (1) The annual variations are most pronounced at magnetic latitudes of 40–60° in both hemispheres, and usually manifest as winter anomalies; Below magnetic latitude of 40° as well as in the tropical region they are much weaker and winter anomalies that are not obvious. (2) The semi-annual variations, which are usually peak in March or April in most regions, are generally weak in the near-pole regions and strong in the far-pole regions of both hemispheres. (3) Compared with their annual components, the semi-annual variations in the tropical region are more significant.In order to explain the above results, we particularly analyze the global atomic/molecular ratio of [O/N2] at the F2 layer peak height by the MSIS90 model. The results show that the annual variation of [O/N2] is closely related with that of NmF2 prevailing in mid-latitudes and [O/N2] annual variation usually may lead to the winter anomalies of NmF2 occurring in the near-pole region. Moreover, NmF2 semi-annual variations appearing in the tropical region also have a close relationship with the variation of [O/N2]. On the other hand, the semi-annual variations of NmF2 in the far-pole region cannot be simply explained by that of [O/N2], but the variation of the solar zenith angle may also have a significant contribution.     

Large aftershocks triggering by Coulomb failure stress following the 2001<Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>=8.1 great Kunlun earthquake

The great Kunlun earthquake occurred on Nov. 14, 2001 in Qinghai Province, China. Five large aftershocks with magnitude larger than 5.0 occurred near the Kunlun fault after main shock. Calculations of the change in Coulomb failure stress reveal that 4 of 5 large aftershocks occurred in areas with Δσ_f>0 (10^?2–10^?1 MPa) and one aftershock occurred in an area with Δσ_f=?0.56 MPa. It is concluded that the permanent fault displacement due to the main shock is the main cause of activity of large aftershocks, but not the whole cause.     

Electron microscopy study of the sakhaite from endogenous borate deposit in Hunan, China

Sakhaite was first discovered by Ostrovskaya, Pertsev and Nikitina at Siberia in the former Soviet Union. By using the X-ray diffraction technique, they proved that the crystal system of sakhaite was cubic (a = 1.464 nm), its possible space groups were Fm3m, F432, F43m, Fm3, F23, and its crystal chemical for-mula was Ca48Mg16(CO3)16(BO3)28Cl4(OH)8 4H2O[1]. Chichagov, Simonov and Belov studied the crystal structure of synthetic sakhaite and determined that its space group was F4132, …     

Study of charge structure and radiation characteristic of intracloud discharge in thunderstorms of Qinghai-Tibet Plateau

The comprehensive observations on lightning discharges were conducted in Naqu area of Qinghai-Tibet Plateau in summer of 2002. The electric structures of thunderstorms and the characteristics of lightning discharges at initial stage were analyzed by using the observation data. The results show that most of intracloud (IC) lightning flashes were polarities inverted in thunderstorms with tripole electric charge structure and occurred between negative charge region located in the middle of the thunderstorm and positive charge region located at the bottom of the thunderstorm. The radiation characteristics of discharge processes in cloud with longer lasting time involved in Cloud-to-Ground (CG) lightning flashes were similar to that of IC discharges. A lot of radiation pulses were produced in these discharge processes. Because the IC discharges took place at the bottom of thundercloud and were near the ground, they may produce more serious damage to equipment on the ground therefore should not be neglected in lightning protection.     

The application of auto-temperature-controlled ventilation embankment in Qinghai-Tibet Railway

Auto-temperature-controlled ventilation embankment is an effective engineering measure for “cooling roadbed”. Practice proves that this new method can sufficiently make use of natural cold energy. It has the advantages of higher efficiency, better cooling effect and feasibility in engineering practice, and wider application in various environment, etc. And also, it is comparatively cheap in project cost. Through practice in the field for half a year, the testing results show that, with the application of auto-temperature-controlled system, the artificial permafrost table has been raised by 65 cm. The artificial permafrost table was basically at the embankment bottom, and the action of freeze-thaw circle on engineering stability was effectively avoided. In the month with highest ground temperature, in the scope with 1–4 m in depth, including the majority of the embankment and the upper part in the original seasonal layer, the ground temperature decreased by 0.7°C. Through thermal flux calculation in the original seasonal layer, in the month with the maximum thermal flux coming into permafrost, it is found that the thermal flux reduces nearly by half. Coming into the cooling period for nearly a month, the ground temperature in entire auto-temperature-controlled embankment is close to zero, and the foundation is at negative temperature. But in a large region in the embankment and foundation the ground temperature was over 0°C and varied from 0°C to0.39°C in ordinary ventilation embankment.