甲醛前处理对提取海带褐藻胶质与量的影响

褐藻胶(Na-alginate)工业在国外已有半个多世纪的历史,其工艺流程及生产设备等都日趋标准化,产品的种类及其在工业上的用途也走向多样化。我国在五十年代初期曾呈奎和纪明侯就用野生的马尾藻作为原料进行了褐藻胶的提取研究,井确立了褐藻胶的生产工艺,从而诞生了我国的褐藻胶工业。六十年代以来,由于海带的大量人工栽培，褐藻胶生产便采用海带作为原料,由此,这个新兴工业迅猛发展。目前,中国的褐藻胶生产的规模和产量在世界上已名列前矛,除了主产品褐藻胶以外,还同时生产甘露醇、碘等联产品。但这个工业还存在不少问题,特別是褐藻胶的粘度、透明度及色泽等质量指标是人们极为关切的问题。本文拟就海藻原料的前处理工艺对胶的质量和产量的影响做一系统的研究。     

论宁波东南港湾地区水资源的开发利用途径

本文在１９８９年对宁波市水资源进行调查的基础上，进一步分析了东南港湾地区水资源的特点及利用现状，并由此而提出了解决水源的对策。     

不同氮源对微小亚历山大藻生长和毒素产生的影响

通过尿素、氯化铵、酵母浸出粉和硝酸钠等氮源对微小亚历山大藻(Alexandrium minutum)生长及毒素产生的影响研究,分析了微小亚历山大藻对不同氮源利用状况的差异.结果表明,在氮饥饿条件下,加入硝酸钠和酵母浸出粉能显著促进微小亚历山大藻的生长;高浓度的氯化铵在加入后对微小亚历山大藻有一定的毒性效应,表现为生长停滞,但毒性效应在5 d后消失,并得到与添加硝酸钠及酵母浸出粉相似的增长速率0.21 d-1;添加尿素对微小亚历山大藻的生长没有显著促进作用.在四种氮源中,尿素对微小亚历山大藻毒素产生的刺激作用也最弱,在稳定期每个细胞藻细胞毒素含量维持在6.00~8.00 fmol;添加硝酸钠、氯化铵和酵母浸出粉的藻细胞在稳定期毒素含量分别达到11.85,12.86和14.64 fmol.硝酸钠和氯化铵刺激藻毒素产生的效果比酵母浸出粉更为直接.四种含氮营养盐对微小亚历山大藻毒素组成的影响都很小.     

上新世——早更新世青藏高原北缘隆升的磁性地层学证据

对新疆叶城剖面西域砾岩及下伏第三纪地层的磁性地层学研究表明 ,西域砾岩的沉积时代为晚上新世至早更新世 ,磁性地层年龄为 3.5至 <1.8Ma。阿图什组沉积于早上新世 ,古地磁年龄为 4 .6～ 3.5 Ma。阿图什组以砂岩和粉砂岩为主夹薄层砾岩 ,为河流相及冲积扇前缘相。西域砾岩以厚层砾岩为主夹风成粉砂岩 ,为典型洪积—冲积扇堆积。西域砾岩的沉积反映了青藏高原北缘晚上新世至早更新世强烈的隆起和剥蚀     

早第三纪济阳湖盆的形成和演变

在构造和气候的综合作用下,本区在早第三纪成为一个大型裂谷湖盆,并在沙四、沙三和沙一期因受古太平洋海泛影响而具有"近海"湖盆的特征,其演变经历了初始形成-强烈扩张-晚期扩张-收缩干涸四个阶段,构成一个完整的湖侵-湖退旋回和湖泊早期形成-中期扩张-晚期收缩三个亚旋回。     

浅析地图集的发展与趋势

梳理了地图集的发展历史,总结了地图集的发展规律,并给出了地图集的发展趋势。     

Geochemistry and environmental effect of cadmium in the super-large Jinding Pb-Zn deposit,Yunnan Province,China

The Jinding Pb-Zn deposit in Yunnan Province is the representative of a Cd-enriched area and mining activities lead to the release of Cd into the hypergenic ecosystem, resulting in Cd pollution. The concentrations of Cd vary greatly from one type to another type of rocks in the mining district. In the host rock, Cd concentrations range from 50×10^-6 to 650×10^-6 with an average of 310×10^-6. In primary ores, Cd concentrations range from 14×10^-6 to 2800×10^-6 with an average of 767×10^-6. However, in oxidized ores, Cd concentrations are highest, varying within the range of 110×10^-6 to 8200×10^-6 , averaging 1661×10^-6. It is shown that the oxidized ores are the main carder and environmental source of Cd. Leaching test showed that Pb/Zn ores are easy to oxidize and thereafter release Cd and other harmful elements. These leached elements in the leachate may be precipitated rapidly in the order of Zn〉Pb〉Cd. As for the concentration distribution of Cd in the Bijiang River, it is estimated to be 15.7 μg/L Cd in water, 49.3 mg/L in suspended substances, and 203.7 mg/L in sediments. The average value of Cd in soil from the polluted area is 83.0 mg/kg. Natural weathering of Cd-rich rocks and minerals imposes a potential environmental risk on the aquatic ecosystem of the Bijiang catchment.     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

ArcGIS与AutoCAD结合在1：50000数据库更新工程中的应用

由于GIS软件平台与CAD软件平台各自具有的优势不一样,如何把ArcGIS和AutoCAD相结合,利用各自优势,快速有效地进行地形图数据库内业编辑、数据分析;本文重点讨论了GIS和CAD数据交换的问题。     

基于最小二乘配置的三维空间坐标转换

在求解未知转换参数时,鉴于公共点坐标本身的误差,提出利用最小二乘配置法进行空间坐标转换,即将公共点本身坐标作为随机参数,把转换参数作为非随机参数进行处理,最后通过实验对比分析表明,该方法明显优于一般坐标转换方法。