最大熵原理与地震频度-震级关系

地震是一种随机事件 ,它的发生具有极大的不确定性 ,因而可以用熵来进行描述。地震以最无序的方式在各地发生 ,意味着地震熵达到了极大值。古登堡 (Gutenberg)和里克特 (Richter)根据资料和经验得出的地震频度 -震级关系式实际上是在给定的约束条件下 ,当地震熵取极大值时得到的一种负指数分布。文中从最大熵原理得出了同一形式的地震频度 -震级关系 ,使它的来源从理论上得到了解释     

中国大陆及其邻区强震活动与活动地块关系研究

从活动地块假说出发 ,在活动地块研究的基础上 ,探讨了中国大陆及邻区活动地块与强震活动的关系。研究指出 ,主要构造变形和强烈地震大都发生在活动地块边界。在占总面积 17%的活动地块边界上 ,集中了全部的 8级以上巨大地震和 86 %的 7级以上大地震 ,其释放能量占全部总能量的 95 %以上 ,表明中国大陆及其邻区活动地块边界带控制了绝大部分的强地震。从活动地块的整体来看 ,强震活动不仅显示出显著的韵律性特征 ,而且其高、低起伏基本上与中国大陆地区一致 ,只是强震活跃时段有时稍长于中国大陆。各轮回强震活动都有各自活动的主体地区 ,反映了不同活跃期内地块的不同活动方式。文中还从现今地壳运动角度 ,讨论了活动地块运动速率与强地震活动水平之间的可能联系。     

底质不连续面类型、成因及遗迹学特征

底质不连续面是沉积作用中断时所形成的一种地层界面。根据底质的粘结程度可将底质不连续面划分为两大类：固底不连续面和硬底不连续面。固底不连续面中的简单停积面依靠沉积序列的变化来识别，界面上、下的生物地层带是连续的；而复成停积面上、下的生物地层带不连续。在硬底不连续面中，硬底的上、下地层属于同一个沉积体系，而继承性岩底的上、下地层则属于不同的沉积体系，其间发生过重大的沉积间断。根据底质控制的Glossifungites遗迹相和Trypanites遗迹相可以有效地识别各类不连续面并解释其成因。三种类型的不连续面具有层序地层学意义：①侵蚀性不连续面，包括低水位侵蚀面（LSE）和海进侵蚀面（TSE）；②无沉积间断面；③沉积性不连续面（凝缩段）。     

Study of crustal structure with S—wave data from Maqen—Jingbian profile

2-D crustal velocity structure and vp/vs are obtained by processing and interpretation of S-wave data from Maqen-Jingbian deep seismic sounding(DSS)profile.The result shows that there exist obvious differences in 2-D S-wave velocity structure and vp/vs ratio structure along the profile.The S-wave velocities are low and vp/vs ration is high for the westem section of the profile and Haiyuan region,while they are normal for the middle and eastern sections.The changes in lithologic characters of two major anomalous zones are discussed according to lateral variation of S-wave velocity structure and vp/vs ratio structure.It is concluded that the development and occurrence of the Haiyuan strong earthquake is not only related to tectonic activities,but also to lithologic characters of the region.     

Inversion of receiver function by wavelet transformation

Introduction Receiver function has been extensively applied in studying S wave velocity of crust and up-per mantle for about 20 years (Owens, et al, 1987; LIU, et al, 1996), which is a time series ob-tained by the deconvolution of vertical component from horizontal component for teleseismic P waveform. Receiver function represents the teleseismic P plane wave response of crust and upper mantle beneath seismic station, from which the source and propagation effects are removed. Receiver funct…     

Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China

This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

青藏铁路抛石路基的温度特性研究

铁路道渣和片石铺层的对流换热为多孔介质的热传导问题，根据多孔介质中流体热对流的连续性方程、动量方程和能量方程，应用伽辽金法导出了多孔介质对流换热的有限元公式，并对抛石路基和传统道渣路基在未来25a创温度变化进行了预报分析和比较．计算结果表明，在150cm的抛石厚度，片石直径为10cm，年温度较差30℃的倩况下，在路基中心线y＝一5m处，抛石路基下的冻土温度要比传统路基的温度低2．45℃，抛石路基有对其下面的冻土提供冷能的制冷作用，可以保证冻土路基的稳定．因此，推荐该种路基作为青藏铁路高温冻土区的路基结构，可以最大限度地保护冻土区的铁路．     

慕士塔格冰芯钻孔温度测量结果

2002年8月对慕士塔格冰川累积区海拔6300m左右的两根冰芯钻孔(其中—根达到冰川底部基岩)进行了温度测量，揭示了该处冰川的温度分布特征．结果表明：慕士塔格冰芯的冰温是目前中低纬地区山地冰川中最低的，达-21．79℃，该最低温度出现的位置在35m以下；冰床底部的温度为-20．76℃，也远低于其它山地冰川的冰床温度，极低的温度对成冰过程有重要影响，并有利于获得可靠的冰芯记录。