CATASTROPHIC ECO-ENVIRONMENTAL CHANGE IN THE SONGNEN PLAIN, NORTHEASTERN CHINA SINCE 1900S

Although the Songnen Plain in the northeastern China was developed relatively late in the temperate zone of the world, its eco-environment has changed greatly. This paper analyzes the changes of land cover and the rates and trends ofdesertification during the past 100 years in the Songnen Plain. According to the macroscopic analysis, we find that the eco-environment in the plain has reached to the threshold of catastrophic change since the 1950s. The Thorn Needle Catastrophic Model was used to determine and validate this conclusion. Human activities, including large-scale construction projects, such as huge dams and dikes, and excessive grazing were the primary factors contributing to regional eco-environmental catastrophe. And irrational reclamation of the wilderness also affected the eco-environmental change. The results reveal the complex human-land interactions.     

广东省拖网网囊调查

为实施中华人民共和国国家标准《南海区拖网网囊最小网目尺寸》,对广东省范围内拖网网囊现状进行摸底调查,结果表明,广东省沿海拖网渔船现用网囊网目尺寸(内径)在16.7～35.2 mm范围内,总体平均为27 mm,均未能达到1989年国家技术监督局发布的中华人民共和国国家标准--《南海区拖网网囊最小网目尺寸》--内径39 mm.     

The global joule heat production rate and the AE index

The accuracy of the AE index as a measure of the joule heat production rate is examined for a typical substorm event on 18 March 1978 by estimating the global joule heat production rate, as a function of time, using data obtained from the IMS six meridian chains. In spite of the fact that the AE index had had an initial slow growth which was followed by a rapid growth, the joule heat production rate attained a high level during the slow growth and thus their variations were considerably different from those of the AE index. Therefore, although the AE index is statistically linearly related to the global joule heat production rate, one should be cautious in assuming that details of time variations of the AE index during individual events represent those of the joule heat production rate.     

Simulating methane emission from a Chinese rice field as influenced by fertilizer and water level

Natural and agricultural wetlands are considered to be the major sources of global atmospheric methane (CH₄). A one‐dimensional model was developed to simulate methane emission and used to examine the influence of various physical processes on the rate of methane emission. Three processes involved in the methane emission are implemented in the model: production, reoxidation and transport. Three transport pathways were considered: diffusion across water–air or soil–air interfaces, ebullition and diffusion through plants. These pathways are influenced by soil properties, plant growth, water‐table conditions, temperature and external inputs (e.g. fertilizer). The model was used to examine the seasonal variation of the methane emission at a rice field in Hunan, China, which was observed during a field experiment for consecutive (early and late) rice seasons in 1992. The observed seasonal variations of methane emission, and role of plants in transporting methane to the atmosphere, are captured by the model simulation. Further model applications were conducted to simulate effects of fertilizer and water‐level condition on the methane emission. The results indicate that unfermented organic fertilizer produces a higher methane emission rate than mineral fertilizer. The simulations with treatments of a deep‐water covering and constant moisture reduced the methane emission. The rice field study provides a framework for further development of the model towards simulations based on spatially distributed variables (e.g. water table, soil temperature and vegetation) at a regional scale. Copyright © 2003 John Wiley & Sons, Ltd.     

差分观测与伪距观测的定位精度

严格论证了在对空间或地面目标的定位中,利用伪距测量观测模型的几何因子大于用台站间一次差分观测模型的几何因子.此外,台站间完全差分测量观测的定位精度优于不完全测量情形的定位精度.这些结果给人们在实际工作中采取何种定位方式提供了可靠的理论依据.     

The New Multichannel Radiospectrograph ARTEMIS-IV/HECATE, of the University of Athens

We present the new solar radiospectrograph of the University of Athensoperating at the Thermopylae Station since 1996. Observations cover thefrequency range from 110 to 688 MHz. The radiospectrograph has a 7-meterparabolic antenna and two receivers operating in parallel. One is a sweepfrequency receiver and the other a multichannel acousto-optical receiver.The data acquisition system consists of a front-end VME based subsystem anda Sun Sparc-5 workstation connected through Ethernet. The two subsystems areoperated using the VxWorks real-time package. The daily operation is fullyautomated: pointing of the antenna to the sun, starting and stopping theobservations at pre-set times, data acquisition, data compression by`silence suppression', and archiving on DAT tapes. The instrument can beused either by itself to study the onset and evolution of solar radio bursts or in conjunction with other instruments including theNançay Decametric Array and the WIND/WAVES RAD1 and RAD2 low frequencyreceivers to study associated interplanetary phenomena.     

THE CONSTRUCTION AND ITS DEVELOPMENT OFTHE OVERSEAS TRANSPORT SYSTEM IN NORTHEAST CHINA

ＴＨＥＣＯＮＳＴＲＵＣＴＩＯＮＡＮＤＩＴＳＤＥＶＥＬＯＰＭＥＮＴＯＦＴＨＥＯＶＥＲＳＥＡＳＴＲＡＮＳＰＯＲＴＳＹＳＴＥＭＩＮＮＯＲＴＨＥＡＳＴＣＨＩＮＡＧａｏＳｈａｌｉ（高莎丽）（ＤｅｐａｒｔｍｅｎｔｏｆＧｅｏｇｒａｐｈｙ，ＮｏｒｔｈｅａｓｔＮｏｒｍ...     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002