Shear-induced instability and arch filament eruption: A magnetohydrodynamic (MHD) numerical simulation

We investigate, via a two-dimensional (nonplanar) MHD simulation, a situation wherein a bipolar magnetic field embedded in a stratified solar atmosphere (i.e., arch-filament-like structure) undergoes symmetrical shear motion at the footpoints. It was found that the vertical plasma flow velocities grow exponentially leading to a new type of global MHD-instability that could be characterized as a Dynamic Shearing Instability, with a growth rate of about 8{ovV} _A a, where {ovV} _A is the average Alfvén speed and a ^–1 is the characteristic length scale. The growth rate grows almost linearly until it reaches the same order of magnitude as the Alfvén speed. Then a nonlinear MHD instability occurs beyond this point. This simulation indicates the following physical consequences: the central loops are pinched by opposing Lorentz forces, and the outer closed loops stretch upward with the vertically-rising mass flow. This instability may apply to arch filament eruptions (AFE) and coronal mass ejections (CMEs).To illustrate the nonlinear dynamical shearing instability, a numerical example is given for three different values of the plasma beta that span several orders of magnitude. The numerical results were analyzed using a linearized asymptotic approach in which an analytical approximate solution for velocity growth is presented. Finally, this theoretical model is applied to describe the arch filament eruption as well as CMEs.     

Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S₂ generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S₂ generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S₂ generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen.     

U-Pb, Hf and O isotope evidence for two episodes of fluid-assisted zircon growth in marble-hosted eclogites from the Dabie orogen

A combined study of internal structure, U-Pb age, and Hf and O isotopes was carried out for metamorphic zircons from ultrahigh-pressure eclogite boudins enclosed in marbles from the Dabie orogen in China. CL imaging identifies two types of zircon that are metamorphically new growth and recrystallized domain, respectively. The metamorphic zircons have low Th and U contents with low Th/U ratios, yielding two groups of ²⁰⁶Pb/²³⁸U age at 245 ± 3 to 240 ± 2 Ma and 226 ± 4 to 223 ± 2 Ma, respectively. Anomalously high δ¹⁸O values were obtained for refractory minerals, with 9.9 to 21.4‰ for garnet and 16.9‰ for zircon. This indicates that eclogite protolith is sedimentary rocks capable of liberating aqueous fluid for zircon growth during continental subduction-zone metamorphism. Most of the zircons are characterized by very low ¹⁷⁶Lu/¹⁷⁷Hf ratios of 0.000001-0.000028, indicating their growth in association with garnet recrystallization. A few of them falling within the older age group have comparatively high ¹⁷⁶Lu/¹⁷⁷Hf ratios of 0.000192-0.000383, suggesting their growth prior to the formation of garnet in the late stage of subduction. The variations in the Lu/Hf ratios for zircons can thus be used to correlate with garnet growth during eclogite-facies metamorphism. In either case, the zircons have variable ε_Hf (t) values for individual samples, suggesting that their protolith is heterogeneous in Hf isotope composition with localized fluid availability in the bulk processes of orogenic cycle. Nevertheless, a positive correlation exists between ²⁰⁶Pb/²³⁸U ages and Lu-Hf isotope ratios for the metamorphically recrystallized zircons, suggesting that eclogite-facies metamorphism in the presence of fluid has the identical effect on zircon Lu-Hf and U-Th-Pb isotopic systems. We conclude that the zircons of the older group grew in the presence of fluid during the subduction prior to the onset of peak ultrahigh-pressure metamorphism, whereas the younger zircons grew in the presence of fluid released during the initial exhumation toward high-pressure eclogite-facies regime.     

Effect of some additives on synthesis of zeolite from coal fly ash

Hydrothermal conversion of fly ash into zeolites was conducted and the effects of the addition of sodium halide and waste solutions produced after zeolitization of fly ash, as well as the adjustment of the Si/Al ratio prior to synthesis process on the formation and cation exchange capacity (CEC) of zeolite product were evaluated. Both the addition of NaCl and NaF ameliorated the crystallinity and CEC of synthesized zeolite, but NaF had a better improvement effect. Na⁺ was considered to enhance the crystallization of zeolite, while F⁻ favored the dissolution of fly ash. The type of zeolite formed depended on the Si/Al ratio of the starting material prior to the nucleation and crystallization of zeolite. The adjustment of the Si/Al ratio of fly ash by addition of Na₂SiO₄ and Al(OH)₃ changed the type and CEC of zeolite. Waste solutions contained large amount of Si and little Al due to the formation of a zeolite named NaP1 in zeolite terminology with the Joint Committee of Powder Diffraction Standard (JCPDS) code of 39-0219. The alkalinity decreased largely. As a result, the CEC value of zeolite products synthesized with waste solution as alkali source decreased. The supplementation of new alkali to adjust the alkalinity of waste solution could enhance the CEC of synthesized product. It was concluded that: (1) addition of sodium halide and adjustment of the Si/Al ratio prior to synthesis can improve the quality of zeolite; (2) waste solutions produced following the zeolitization of fly ash can be reused as an alkali source in the activation of fly ash; zero-emission of waste solution in the synthesis of zeolite from fly ash is possible.     

Weathering and climate change since l820 AD in Hoh Xil, Qinghai-Xizang Plateau, China——Evidence from element geochemistry of lake sediments of Gulug Co Lake

Element geochemistry of lake sediments has been widely used to detect climate change because element composition and ratios can reflect the weathering degree in the source area. Given the dement composition of lake sediments from Gulug Co Lake, Hoh Xil, Qing- hai-Xizang Plateau, chemical index of alteration （CIA）, index of composition variability （ICV） and other element ratios have been used to establish the weathering sequence of this area since 1820 AD. The weathering is so weak that the element composition change is more sensitive to climate change and autochthonous processes. From 1820 to 1984 AD, there were two drier periods with a wetter interval from 1870 to 1945 AD. After 1984 the weather showed a tendency of becoming wet.     

Characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems in the North China coal basin

A conceptual framework for characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems is presented, based on the features of the site conditions and analyses of the water bursting and mine inundation events of the North China coal basin. Comprehensive analyses of the hydrogeological conditions for establishment of the three-dimensional groundwater flow systems of the North China coal basin revealed different vertical hydraulic connection paths or channels. These connections include karst collapse columns, fault or fracture zones, buried weathering zones, and fracture networks in aquitards, within the multilayered groundwater flow systems. Also examined, was the effect of the primary features of the flow system and those different connection paths on water bursting and discharge into the underground coal mines. It was demonstrated that appropriately identifying and adequately understanding the three-dimensional multilayered groundwater flow systems and those various vertical hydraulic connection mechanisms are critical for appropriately preventing water bursting hazards and predicting water discharge into underground mines. A valuable guideline is presented on characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems.

---

Resumen Un cadre de travail conceptuel pour la caractérisation du jaillissement et de la vidange des eaux dans les mines à plusieurs niveaux d'écoulement est présenté, basé sur les conditions et l'analyse sur site du jaillissement des eaux et des inondations dans les bassins charbonneux du Nord de la Chine. L'analyse compréhensive des conditions hydrogéologiques des systèmes d'écoulement tridimensionnel de ces bassins, révèle des trajets ou des chenaux qui sont autant de connections hydrauliques verticales. Ces connections comprennent des effondrement karstiques en colonne, des zones de fractures et de failles, des zones d'altération, des réseaux de fractures dans les aquitards, dans le système hydrogéologique multicouche. L'influence des caractéristiques primaires du système d'écoulement et de ces différentes connections sur le jaillissement et la vidange dans les mines, est également examiné. Il a été démontré que l'identification appropriée et la compréhension adéquate du système d'écoulement souterrain multicouche et tridimensionnel, et des mécanismes variés de connection hydraulique verticale est critiquée pour prévenir de manière appropriée les risques de jaillissement et de vidange dans les mines. Des guidelines valorisables sont présentées, pour la caractérisation du jaillissement et de la vidange dans de tels systèmes.

---

Résumé Se presenta un marco conceptual para la de caracterización de la despresurización y descarga de agua a minas subterráneas con sistemas de acuíferos de múltiples niveles, el cual se basa en las condiciones del sitio, análisis de la despresurización de agua e inundaciones de minas en la cuenca de carbón del norte de la China.Un análisis comprehensivo de las condiciones hidrogeológicas para el establecimiento de los sistemas de flujo de agua de tri-dimensionales en la cuenca de carbón del norte de la China ha revelado diferentes canales hidráulicos verticales. Estas conexiones incluyen columnas de karst colapsadas, fallas o zonas de fracturas, zonas de regalita hundida y redes de fracturas en zonas de poca permeabilidad dentro de los sistemas de flujo de múltiples niveles.También se investigó el efecto de los rasgos primarios del sistema de flujo y los diferentes canales conectivos sobre la despresurización y descarga de agua a minas subterráneas. Se demostró que el entendimiento e identificación adecuada de los sistemas de acuíferos de múltiples niveles en tres dimensiones es crítico para prevenir apropiadamente la despresurización y descarga de agua a minas subterráneas. Se presentan lineamientos valiosos en relación con la despresurización y descarga de agua a minas subterráneas en sistemas de flujo de múltiple nivel.

     

Impact of Flood Disasters on Taiwan in the Last Quarter Century

The increasing natural disasters, especially floods during the last quarter century, are raising the economic losses in Taiwan. The most severe hazard in Taiwan is flooding induced by typhoons and storms in summer and autumn. By comparing the rivers around the world, the ones in Taiwan have the steepest slopes, the largest discharge per unit drainage area, and the shortest time of concentrations. Rapid urbanization without proper land uses managements usually worsen the flood problems. Consequently, flood hazards mitigation has become the most essential task for Taiwan to deal with. Although the government keeps improving flood defense structures, the flood damage grows continuously. In this article, possible flood mitigation strategies are identified for coping with complex environmental and social decisions with flood risk involved.     

T -distributed Random Fields: A Parametric Model for Heavy-tailedWell-log Data1

Histograms of observations from spatial phenomena are often found to be more heavy-tailed than Gaussian distributions, which makes the Gaussian random field model unsuited. A T-distributed random field model with heavy-tailed marginal probability density functions is defined. The model is a generalization of the familiar Student-T distribution, and it may be given a Bayesian interpretation. The increased variability appears cross-realizations, contrary to in-realizations, since all realizations are Gaussian-like with varying variance between realizations. The T-distributed random field model is analytically tractable and the conditional model is developed, which provides algorithms for conditional simulation and prediction, so-called T-kriging. The model compares favourably with most previously defined random field models. The Gaussian random field model appears as a special, limiting case of the T-distributed random field model. The model is particularly useful whenever multiple, sparsely sampled realizations of the random field are available, and is clearly favourable to the Gaussian model in this case. The properties of the T-distributed random field model is demonstrated on well log observations from the Gullfaks field in the North Sea. The predictions correspond to traditional kriging predictions, while the associated prediction variances are more representative, as they are layer specific and include uncertainty caused by using variance estimates.     

A simple hypoplastic model for normally consolidated clay

The paper presents a simple constitutive model for normally consolidated clay. A mathematical formulation, using a single tensor-valued function to define the incrementally nonlinear stress–strain relation, is proposed based on the basic concept of hypoplasticity. The structure of the tensor-valued function is determined in the light of the response envelope. Particular attention is paid towards incorporating the critical state and to the capability for capturing undrained behaviour of clayey soils. With five material parameters that can be determined easily from isotropic consolidation and triaxial compression tests, the model is shown to provide good predictions for the response of normally consolidated clay along various stress paths, including drained true triaxial tests and undrained shear tests.